Carrier Comprehensive Guide for 30MPA and 30MPW Refrigeration Systems

Page 9

a30-4998

09DP

AIR-COOLED CONDENSER

NOTES:

1.Chiller must be installed level to maintain proper compressor oil return.

2.Wiring and piping shown are general points-of-connection guides only and are not intended for a specific installation. Wiring and pip- ing shown are for a quick overview of system and are not in accor- dance with recognized standards. Units should be installed using certified drawings.

3.All wiring must comply with applicable local and national codes.

4.All piping must follow standard piping techniques. Refer to Carrier System Design Manual part 3, Carrier E20-II software Refrigerant Piping program, or appropriate ASHRAE (American Society of Heating, Refrigerating, and Air Conditioning Engineers) handbook for details on proper piping sizes and design.

5.See Tables 1A and 1B for minimum system fluid volume. This sys- tem may require the addition of a holding tank to ensure adequate volume.

6.Hot gas lines should rise above refrigerant level in condenser cir- cuit. Double riser may be required; check unit minimum capacity.

7.Trap should be installed on hot gas lines to prevent condenser oil

and refrigerant vapor migration from accumulating in compressor during off cycle.

8. Pitch all horizontal lines downward in the direction of refrigerant flow.

9.Provide support to liquid and gas lines near the connections to the condenser coil.

10.For pressure relief requirements, see latest revision of ASHRAE Standard 15, Safety Code for Mechanical Refrigeration.

11.A strainer with a minimum of 40 mesh must be installed within 10 ft (3 m) of the evaporator fluid inlet to prevent debris from clogging or damaging the heat exchanger. This strainer is required and is avail- able as an accessory.

12.Piping, wiring, switches, vents, strainers, drains, and vibration iso- lation are all field-supplied.

Fig. 9 — Typical Piping with 30MPA Unit and 09DP Remote Air-Cooled Condenser

9

Image 9
Contents Installation Instructions 30MP Model Number Nomenclature A30-5038A30-5032 Dimensions 30MPA015-045 UnitsA30-5033 → Dimensions 30MPW015-045 UnitsCompressor 30MPA Air-Cooled and 30MPW Liquid-Cooled Units EnglishCondenser 30MPW 30MPA Air-Cooled and 30MPW Liquid-Cooled Units SIPlace the Unit Typical Piping with Liquid-Cooled 30MPW Chiller A30-4997AIR-COOLED Condenser A30-4998A30-1245 Install the Victualic CouplingCondenser Water Pressure Drop A30-5036A30-5035 A30-5034A30-3226 Water Quality Characteristics LimitationsA30-5048 A30-5047LRA MCA ICF Mocp Electrical Data 30MPA,MPW UnitsA30-5039 Typical Low Voltage Control Wiring

30MPA specifications

The Carrier 30MPA is a prominent industrial chiller unit known for its outstanding performance and efficiency in cooling applications. Designed for mid-sized commercial and industrial facilities, it exemplifies cutting-edge technology and engineering.

One of the main features of the Carrier 30MPA is its advanced scroll compressor technology. This innovative design allows for improved efficiency and reduced energy consumption compared to traditional chiller units. The compressors are known for their reliability and quiet operation, making the 30MPA ideal for environments where noise is a concern.

The unit employs a high-efficiency economizer mode, which optimizes energy use during cooler ambient conditions. By utilizing outside air for cooling, the economizer significantly reduces the chiller's energy demand, promoting sustainability and cost savings.

Additionally, the 30MPA is equipped with a microprocessor-based control system. This intelligent control technology allows for precise monitoring and adjustment of system performance, enhancing both comfort and efficiency. The controls come with various customizable settings, enabling users to tailor the chiller's operation to meet specific needs.

The 30MPA also stands out with its robust construction and design. It features a compact footprint, allowing for easy installation in confined spaces. Its weather-resistant casing and corrosion-resistant components ensure durability and long service life, even in harsh environments.

Moreover, the Carrier 30MPA incorporates an environmentally friendly refrigerant, which complies with global regulations aimed at reducing ozone depletion and greenhouse gas emissions. This commitment to environmental responsibility aligns with Carrier's goal of promoting sustainable building practices.

Another important characteristic is its flexible configuration options. The unit can accommodate different system designs and requirements, making it suitable for a wide range of applications, from chilled water systems in hospitals to comfort cooling in office buildings.

In summary, the Carrier 30MPA chiller combines innovative technology, energy efficiency, and robust design, making it a standout choice for commercial and industrial cooling applications. Its advanced features and sustainable approach not only ensure reliable performance but also contribute to lower operational costs and reduced environmental impact.