LG Electronics LSWD305ST, LSWS305ST Installation Drawings for 30 Double BUILT- in Oven

Page 5

Part 2 INSTALLATION REQUIREMENTS

2 INSTALLATION DRAWINGS (FOR 30” DOUBLE BUILT- IN OVEN)

The first step of your installation should be to measure your current cutout dimensions and compare them to the cutout dimensions shown below. You may find little or no cabinet work will be necessary.

IMPORTANT NOTE

The cabinet base platform must be able to support 325lbs (147Kg). If the cabinet does not have a solid bottom, two braces or runners must be installed level with the bottom of the cutout to support the weight of the oven. Make sure the base is level and front of cabinet is square. If the cabinet base is not level, the oven glides will tend to slide out when opening the door.

If marks, blemishes or the cutout opening are visible above the installed oven, it may be necessary to add wood shims under the runners and front trim until the marks or opening are covered.

If the cabinet does not have a front frame and the sides are less than 3/4” (1.9 cm) thick, shim both sides equally to establish the cutout width.

The junction box must be flush with the rear wall of the cabinet as shown below.

Allow at least 23” clearance for door depth when it is open.

ENGLISH

Product dimensions

273/8” (69.5 cm)

52 1/16”

(132.2 cm)

293/4” (75.5 cm)

51 5/8”

(131.0 cm)

233/8” (59.3 cm)

Cutout dimensions

Cabinet Width

30” (762 mm)

Recommended

 

 

Minimum

 

 

Cutout location

 

 

from floor

12” (304.8 mm)

Cutout Depth

23

1/2” Min. (596.9 mm)

Cutout Width

28

1/2” Min. (723.9 mm)

 

28

5/8” Max. (727 mm)

Cutout Height

51

13/16” Min. (1316 mm)

 

51

15/16” Max. (1319.2 mm)

Allow 1”

minimum for

overlap of oven

23”

30”

28 1/2” Min.

28 5/8” Max.

Allow 1”

minimum for

overlap of oven

5”

51 13/16” Min.

51 15/16” Max.

Junction Box Location

47”

23 1/2”

Minimum cutout location from floor 12”

- 5 -

Image 5
Contents Electric Convection BUILT-IN Oven Before YOU Begin Important Safety InstructionsImportant Note Prepare to Install the OvenInstallation Drawings for 30 Single BUILT- in Oven Part 2 Installation RequirementsInstallation Drawings for 30 Double BUILT- in Oven Dimensions are same as the single built-in oven on Preparation for Moving the Oven Electrical Connection Requirements Part 3 Electrical ConnectionsElectrical Connection Wire circuit connection Cabinet Installation Part 4 Install the OvenChecking Operation Part 5 Operation Checklist

LSWD305ST, LSWS305ST specifications

LG Electronics has consistently been a leader in the home appliance sector, and their latest offerings, the LSWS305ST and LSWD305ST, only strengthen that reputation. These two models represent the pinnacle of innovation in laundry technology, designed to meet the demands of modern households while ensuring efficiency, durability, and enhanced user experiences.

One of the standout features of the LG LSWS305ST and LSWD305ST is their advanced Smart Inverter Technology. This technology intelligently adjusts the energy consumption based on the load size and fabric type, optimizing performance while minimizing energy usage. This not only results in significant energy savings but also leads to a lower environmental impact.

Additionally, both models come equipped with LG's TurboWash 3D technology. This feature allows for a powerful yet gentle washing experience, ensuring that clothes come out clean without the wear and tear often associated with traditional washing methods. The TurboWash system harnesses high-pressure nozzles that spray water and detergent directly onto fabrics, resulting in shorter wash cycles while maintaining exceptional cleaning performance.

The LSWS305ST and LSWD305ST also feature a sleek and modern design that fits seamlessly into any laundry room. Their large capacity drums can handle even the most demanding laundry loads, while the stainless steel finish not only adds a contemporary aesthetic but also provides durability and resistance to rust.

In terms of user convenience, both models are equipped with a user-friendly interface and intuitive controls. The direct drive motor technology minimizes noise and vibration, allowing for quieter operation during wash cycles. Additionally, the SmartThinQ app integration allows users to control and monitor their washer and dryer remotely, offering an unprecedented level of convenience.

Safety and reliability are crucial in any appliance, and LG has taken this to heart with the LSWS305ST and LSWD305ST. With features like child lock and various sensing technologies, users can enjoy peace of mind knowing their appliances are safe and operate efficiently.

In summary, the LG Electronics LSWS305ST and LSWD305ST are remarkable laundry appliances that combine cutting-edge technologies like Smart Inverter and TurboWash, with a user-centric design. These models address the needs of modern consumers by providing efficient, effective, and eco-friendly laundry solutions that cater to families of all sizes. With LG’s commitment to quality and innovation, these washing machines stand as a testament to the brand’s dedication to enhancing everyday life through technology.