Part 4 Install the Oven

Hinge arm

Bottom edge of slot

Indentation

1 CABINET INSTALLATION

The fifth step of your installation should be to install the oven into the cabinet as follows:

1.Sliding the oven into the opening.

a.Loop (do not tie) a 36” (91cm) string around the conduit before the oven is slid into place.This will keep the conduit from falling behind the oven.

b.Lift oven into cabinet cutout using the oven opening as a grip. Carefully push against the oven front frame. Do not push against outside edges.

c.As you slide the oven back, pull the string so that the conduit will lie on the top of the oven in a natural loop.

d.When you are sure the conduit is out of the way, slide the oven 3/4 way back into the opening. Remove the string by pulling on one end of the loop.

CAUTION

• DO NOT block the oven air exhaust located at the bottom of the oven.

-Blocking the exhaust may cause cabinet damage and product malfunction.

WARNING

• Mounting screws must be used.

-Failure to do so can result in the oven falling out of the cabinet causing serious injury.

English

2.Securing the oven.

a.Using the mounting holes on the oven side trim as a guide, drill pilot holes for screws provided (For securing the double wall oven, use a minimum of 4 screws, one on each side in both the upper and lower ovens. For securing the single wall oven, use a minimum of 2 screws, one on each side.)

b.Secure the oven to cabinet with screws provided. If the cabinet is particle board, you must use 3/4” particle board screws. These may be purchased at any hardware store.

3.Installing the metal bottom trim.

a.Place the metal bottom trim centered over the pre drilled mounting holes on the lower base.

b.Using 3 screws provided, secure the bottom trim to the bottom edge of the cabinet.

4.Reinstalling the oven door.

Mounting

Hole

Locations

Mounting

Hole

Locations

Trim Screws	Side
	Trim

Side

Trim

Metal

bottom trim

Lower base

Español Français

Step. 1

Firmly grasp both sides of the door at the top.

Step. 2

With the door at the same angle as the removal position, seat the

indentation of the hinge arm into the bottom edge of the

hinge slot. The notch in the hinge

arm must be fully seated into the bottom of the slot.

Step. 3

Fully open the door. If the door will not fully open, the indentation is not seated correctly in the bottom edge of the slot.

Step. 4	Hinge arm
Step. 4
Push the hinge locks up	Hinge lock
against the front frame of the
oven cavity to the locked
position.

Step. 5

Close the oven door.

- 11 -

LWD3081ST, LWS3081ST specifications

LG Electronics has long been a leader in the home appliance industry, and its latest washer and dryer models, the LWS3081ST, LWD3081ST, LWS3010ST, and LWD3010ST, exemplify this commitment to innovation and efficiency.

The LG LWS3081ST is a top-loading washer that offers a spacious capacity, which is perfect for families or anyone who deals with large loads of laundry. This model features TurboWash technology, allowing for faster cleaning cycles without compromising on performance. Its 6Motion technology utilizes various washing motions to effectively remove dirt and stains while being gentle on fabrics. The machine operates quietly and comes with an intelligent electronic control system, providing convenience and user-friendly operation.

Complementing the LWS3081ST is the LWD3081ST, a front-loading dryer designed for efficiency and performance. This dryer boasts advanced steam technology, which helps to reduce wrinkles and refresh clothes effectively. The Sensor Dry system ensures that clothes are dried to perfection, eliminating the risk of over-drying. With a large capacity and multiple drying settings, the LWD3081ST makes laundry day less of a chore and more efficient.

The LWS3010ST and LWD3010ST models are designed for those seeking a more compact option without sacrificing performance. The LWS3010ST washing machine features a streamlined design that fits well in small spaces, while still providing a robust set of functions, including multiple wash cycles tailored for various fabric types. Its energy-efficient design is complemented by an inverter direct drive motor, which enhances durability and reduces noise.

Matching the LWS3010ST is the LWD3010ST dryer, which offers a range of drying options suitable for any household. Its compact design allows for easier installation in tight spaces, yet it delivers powerful performance with its innovative drying technology. Both models are equipped with smart features, which provide users with notifications and remote control options via smartphone apps.

Together, these LG models demonstrate the company’s commitment to technology and user-oriented design. They feature smart diagnostics, allowing users to quickly troubleshoot any issues. Each of these washers and dryers combines high efficiency with cutting-edge technology, ensuring reliable performance for years to come, while also being mindful of energy consumption and environmental impact. In summary, the LG LWS3081ST, LWD3081ST, LWS3010ST, and LWD3010ST represent the pinnacle of laundry technology, making them ideal choices for modern households.