Kuppersbusch USA IKD 12250.0 manual Fixing the Frame, Ducted Version AIR Exhaust System

Page 9
ø 150

FIXING THE FRAME

• Loosen the two screws fastening the lower chimney and remove this from the lower frame.

• Loosen the two screws fastening the upper chimney and remove this from the upper frame.

If you wish to adjust the height of the frame, proceed as follows:

• Unfasten the eight metric screws joining the two columns, located at the sides of the frame.

•Adjust the frame to the height required, then replace all the screws removed as above.

• Insert the upper chimney stack from above, and leave

1

1

 

 

 

it running free on the frame.

 

 

•

Lift up the frame, fit the frame slots onto the screws

 

 

 

up to the slot end positions.

 

 

•

Tighten the two screws and fasten the other two

2

2

 

screws provided with the hood.

 

 

 

Before tightening the screws completely it is possible to adjust the frame by turning it. Make sure that the screws do not come out of their seats in the slotted holes.

•The frame mountings must be secure to withstand the weight of the hood and any stresses caused by the occasional side thrust applied to the device.

On completion, check that the base is stable, even if the frame is subjected to bending.

•In all cases where the ceiling is not strong enough at the suspension point, the installer must provide strengthening using suitable plates and backing pieces anchored to the structurally sound

parts.Connections

DUCTED VERSION AIR EXHAUST SYSTEM

When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø 150 mm, the choice of which is left to the installer.

•

Fix the pipe using the pipe clamps 25 provided.

25

•

Remove any activated charcoal filters.

RECIRCULATION VERSION AIR OUTLET

•Push fit connection 15 onto the air outlet.

•Insert the connection extension pieces laterally 14.1 in connection 15.

Should the central reinforcing piece of the frame somehow interfere the chimney air outlet grille, it is possible to unscrew it and to place it in another screw hole set.

15

14.1

GB

 

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents IKD Page Venting Requirements Read and Save These InstructionsElectrical Requirements R N I N GR N I N G Dimensions Characteristics12g 12c 12h 14.1 12e ComponentsInstallation Drilling the Ceiling/shelf and fixing the frameDrilling the CEILING/SHELF Fixing the Frame Ducted Version AIR Exhaust SystemRecirculation Version AIR Outlet Electrical Connection Flue assembly Mounting the hood bodyCleaning Metal SELF- Supporting Grease Filters MaintenanceUSE Control panelFuse Replacement Light ReplacementActivated charcoal filter Recirculation version LightingRèglements D’ÉVACUATION Lisez Bien Cette Fiche Avant D’INSTALLER LA HotteFiche Technique Électrique AvertissementAvertissement Encombrement CaracteristiquesComposants Perçage PLAFOND/ÉTAGÈRE Perçage Plafond/Étagère et Fixation TreillisFixation Treillis BranchementsSortie AIR Version Aspirante Sortie AIR Version FiltranteVersion Filtrante Montage Cheminée Montage Corps HotteUtilisation Tableau de commandeEntretien Filtres anti-graisseRemplacement Lampes Remplacement Filtre AU Charbon ActifFiltre anti-odeur Version filtrante EclairagePage 43600216902

IKD 12250.0 specifications

The Kuppersbusch USA IKD 12250.0 is a premium built-in refrigerator that epitomizes modern design and advanced technology. With an impressive blend of style, functionality, and energy efficiency, this model represents the epitome of elegance in kitchen appliances.

One of the standout features of the IKD 12250.0 is its generous capacity. With ample storage space, this refrigerator is designed to accommodate the needs of large families or culinary enthusiasts. The interior is thoughtfully organized with adjustable shelves, allowing users to customize the layout according to their preferences and pantry needs. This flexibility ensures that everything from tall bottles to small condiments can be stored efficiently.

The cooling technology in the Kuppersbusch IKD 12250.0 sets it apart from other models. It incorporates a dynamic cooling system that ensures even temperature distribution throughout the refrigerator. This innovative feature minimizes temperature fluctuations, preserving the freshness of food for longer periods. Additionally, the No Frost technology eliminates the need for manual defrosting, saving users time and hassle in maintenance.

Aesthetic appeal is not overlooked in this model. The sleek and minimalist design complements modern kitchen decor, while the stainless steel finish adds a touch of sophistication. The integrated handles lend to its seamless appearance, making it an attractive centerpiece in any kitchen.

For those who prioritize energy efficiency, the Kuppersbusch IKD 12250.0 exceeds expectations. It is rated with a high energy efficiency class, which not only helps reduce electricity bills but also contributes to a greener environment. This commitment to sustainability is a vital consideration for environmentally-conscious consumers.

The refrigerator is equipped with advanced temperature control features that allow users to set and monitor the internal climate, ensuring optimal storage conditions for various food types. With easy-to-use digital controls, managing the refrigerator's settings has never been more convenient.

In summary, the Kuppersbusch USA IKD 12250.0 is a sophisticated and innovative appliance that combines luxurious aesthetics with practical functionality. Its spacious design, advanced cooling technology, energy efficiency, and modern convenience features make it an excellent choice for anyone looking to enhance their kitchen experience. This refrigerator is not just a storage solution; it's a statement piece that reflects quality and style.
Top Page Image Contents