LG Electronics 3828W5U0492 installation instructions Prepare the Venting, Before You Start

Page 10

STEP 3: PREPARE THE VENTING

W A R N I N G

●To avoid risk of property damage, unplug the microwave oven or disconnect power at source by removing fuse or throwing circuit breaker.

●To avoid risk of personal injury, wear protective gloves when handling mounting plate.

DO NOT PULL OR STRETCH THE BLOWER WIRING! Pulling and stretching the blower wiring could result in electrical shock.

●Your microwave oven is shipped with the blower assembled for room venting. If you want wall-venting or roof-vented installation, you must change the blower, as detailed below.

Before You Start

1.Remove any shipping materials and parts from inside the microwave oven.

2.Cover the counter top or cooktop with a thick, protective covering to protect it from damage and dirt. See Figure 11.

NOTE: If you have a free-standing range, disconnect it, move it onto a piece of cardboard or hardboard and pull it away from the wall, so that you can get closer to the upper cabinet and back wall for easier measuring and drilling.

Remove The Mounting Plate:

1.Remove mounting plate screw(s) (1 or 2 screws) from the mounting plate as shown and discard. See Figure 12.

A thick, protective

covering

Figure 11

Mounting plate

Mounting plate screw(s)

(1 or 2 screws)

Control Panel Side

2.This plate will be used as the rear mounting plate. (It will be used to locate and mark the mounting holes on the rear wall.)

3.Locate exhaust adapter, grease filters and hardware packet.

Mounting plate

Mounting plate

4. At this point, remove any adhesive tape (if there is any), on the

screw(s)

exhaust adapter, the grease filters and the power supply cord.

(1 or 2 screws)

 

Room-Vented (recirculating) Installation:

Control Panel Side

Figure 12

This oven is shipped assembled for room-vented.

Blower Plate

 

Wall-Vented Installation:

Mounting Screw (option)

Blower Plate

1. Remove one blower unit mounting screw and one or two

Back Plate

blower plate screw(s). Remove the blower plate from cabinet.

 

See Figure 13.

Blower Unit

2. Carefully lift the blower unit out of the microwave oven.

Blower Unit

3. Use side cutters or thin snips to cut and remove knockouts “B”

Mounting Screw (option)

Parts “B”

from Back plate. Discard knockouts. Be careful not to distort

Figure 13

the plate. See Figure 14.

 

 

Knockouts Parts “B”

 

Parts “B”

 

Figure 14

– 10 –

 

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Microwave Oven Your Safety First Electrical Rating of this Oven 120V AC HzR N I N G Make Sure YOU have Enough Space and Support Damper/duct connector PARTS, TOOLS, MaterialsFor taping the templates to the wall Prepare the Electrical Connections Power-Supply-Cord HoleUpper Cabinet Grounded Outlet Wall Venting Roof Venting Prepare the Venting SystemRoom Venting Standard Fittings Duct Length 73 ftPrepare the Venting Before You StartRoof-Vented Installation Prepare the Wall & Upper Cabinet To avoid risk of personal injury, electrical shock or death Install the Mounting Plate Oven Must Be Connected To At Least One Wall StudFor Wall-Vented Attach the Oven to the Wall Attach the Oven to the Wall Memo

3828W5U0492 specifications

The LG Electronics 3828W5U0492 is a high-performance refrigerator compressor designed to deliver efficient cooling solutions for home appliances. This model showcases the innovative technology and engineering expertise LG is renowned for, making it a popular choice in refrigeration systems.

One of the standout features of the 3828W5U0492 is its Quiet Operation technology. This compressor operates at lower noise levels than traditional refrigerant compressors, which creates a more serene home environment. This is particularly beneficial for households where kitchen noise can be disruptive.

Energy efficiency is another hallmark of the 3828W5U0492. LG has integrated advanced inverter technology into this compressor, which allows for variable speed control. This means the compressor can adjust its cooling capacity depending on the specific temperature needs, leading to significant savings on energy costs. The inverter technology also reduces wear and tear on the compressor, extending its lifespan.

In terms of cooling performance, the 3828W5U0492 is engineered to provide consistent and reliable temperature management. It employs a smart cooling system that quickly responds to temperature changes. This system ensures that your food and beverages stay fresh for longer periods, giving consumers peace of mind regarding food safety.

The compressor is designed for versatility and compatibility with a range of refrigerator models. Its compact design allows for easy installation and integration into various cooling systems. Additionally, LG prioritizes user-friendly maintenance, with features that make service and repair more accessible.

Durability is a key characteristic of the LG 3828W5U0492. Constructed with high-quality materials, this compressor withstands the rigors of everyday use while ensuring optimal performance. It's built to handle varying loads and environmental conditions, making it suitable for a variety of settings.

Overall, the LG Electronics 3828W5U0492 is a testament to the advancement in refrigeration technology. With its focus on quiet operation, energy efficiency, superior cooling performance, and durability, it stands out as a premier choice for modern refrigerators. Whether you're in the market for a new compressor or looking to upgrade your existing system, the 3828W5U0492 offers a reliable and efficient solution that meets today's demands in home refrigeration.
Top Page Image Contents