Roper SEP340X, SEC350X warranty Caring For Your Range, Control knobs, Control panel

Page 9

Caring For Your Range

Bum And Electrical Shock Hazard

Make sure all controls are OFF and the range is cool before cleaning. Failure to do so can result in burns or electrical shock.

The control knobs

1.Turn control knobs to the OFF position.

2.PulI control knobs straight off.

3.Wash in warm, soapy water.

4.Rinse well and dry completely. Do not soak.

The control panel

1.Wipe with warm, soapy water or spray glass cleaner, and a soft cloth.

2.Rinse well.

3.Dry with soft cloth.

4.Replace control knobs by pushing them firmly into place.

NOTE: When cleaning, never use steel wool, abrasives, or commercial oven cleaners which may damage finish. After cleaning, make sure all control knobs point to the OFF position.

The surface units and reflector bowls

Removing

3.Pull the surface unit straight away from the receptacle.

4.Lift out the reflector bowl. See Cleaning Chart on page 12 for cleaning instructions.

Replacing

1, Make sure alI surface units are turned OFF.

2.Line up openings in the reflector bowl with the surface unit receptacle.

3.Hold the surface unit as level as possible with the terminal just started into the receptacle. Push the surface unit terminal into the receptacle.

4.When the terminal is pushed into the receptacle as far as it will go, the surface unit wilI fit into the reflector bowl.

Reflector bowls reflect heat back to the utensils on the surface units. They also help catch spills. When they are kept clean, they reflect heat better and look new longer.

If a reflector bowl gets discolored, some of the utensils may not be flat enough, or some may be too large for the surface unit. In either case, some of the heat that’s meant to go into or around a utensil goes down and heats the reflector bowl. This extra heat can discolor it.

1.Turn off alI surface units and let cool.

2.Lift the edge of the unit opposite the receptacle, just enough to clear the reflector bowl.

Fire And Electrical Shock Hazard

1 ;;;;,“,he

reflectqr bowls

1

with foil. Fire or electrical shock

 

Page 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Electric Range ContentsImportant Safety Instructions Disconnect the electrical supply before servicing the range Models SEC350X shown & SEP340X Parts & FeaturesModel SEC350X Model SEP340XUsing the surface units Using Your RangeSetting the clock Using the Minute TimerAdjusting the oven temperature control Using the oven controlsBaking BroilingTo delay start and stop automatically Using the automatic MEALTIMER’ clockTo start baking now and stop automatically For regular baking and broilingOptional backguard accessory Oven ventStorage drawer Control knobs Caring For Your RangeControl panel Surface units and reflector bowlsLift-up cooktop Removable Oven door Continuous-cleaning oven Model SEC350X Standard-cleaning oven Model SEP340XPart What to USE Cleaning chartHOW to Clean Oven light Model SEC350X Before You Call For Service Check ifWhat to do Full ONE Year Warranty Length of WarrantyFull Five Year Warranty Warranty Limited 2ND-5TH Year

SEP340X, SEC350X specifications

Roper SEC350X and SEP340X are state-of-the-art industrial solutions designed for the demanding environments of warehousing, logistics, and manufacturing. These machines embody a combination of advanced engineering, robust design, and high efficiency, making them perfect for organizations looking to enhance their material handling capabilities.

The Roper SEC350X model is a high-capacity electric pallet jack that offers exceptional maneuverability. Its compact design allows it to easily navigate tight spaces, while the powerful motor offers impressive lifting capabilities. One of the main features of the SEC350X is its ergonomic design, which reduces operator fatigue and increases productivity. With a user-friendly control panel and intuitive joystick, operators can quickly learn how to operate the unit, thus minimizing training times.

Additionally, the SEC350X comes equipped with an advanced battery management system that maximizes operational efficiency. This technology ensures that the machine can operate longer between charges, reducing downtime and increasing the overall throughput of operations. The durable construction also stands out, with heavy-gauge steel providing long-lasting performance in tough working conditions.

On the other hand, the Roper SEP340X is a reliable electric stacker that offers a blend of power and precision for warehouse operations. Engineered for versatility, the SEP340X can handle a variety of pallet types and has a notable lifting height, making it suitable for stacking materials in high racking systems. This model features adjustable forks, allowing users to customize the stacker's operation to fit different pallet sizes.

A standout characteristic of the SEP340X is its advanced safety features. With integrated sensors and automatic braking systems, the machine enhances operator and pedestrian safety within busy warehouse environments. The SEP340X is also designed with low maintenance in mind, utilizing self-lubricating components that help in reducing operational costs.

Both models, the SEC350X and SEP340X, are also environmentally friendly, as they operate on electric power rather than fossil fuels, contributing to a reduction in carbon footprint. Their compact designs help optimize storage space and enhance operational efficiencies. Whether used in large-scale distribution centers or small warehouses, these machines deliver reliability, productivity, and safety, making them indispensable tools in modern supply chain management.
Top Page Image Contents