Roper FGS397X warranty Caring For Your Range

Page 9

Caring For Your Range

The surface burner grates

soiled or clogged, use a cotton swab or a soft cloth to clean the area. If needed, use swab or cloth

Bum, Electrical Shock, Fire And

Explosion Hazard

.Make sure all controls are OFF and the range is wol before cIeaning.

. Do not use oven cleaners, bleach or rust removers.

. Do not use gasoline or other flammable liquids or vapors to clean this or any other appliance. n Keep the appliance area clear and free from combustible materials, gasoline and other flammable vapors and liquids.

. Do not obstruct the flow of combustion and ventilation air.

Failure to follow these guidelines could result in bums, electrical shock, fire or explosion.

1.Make sure all surface burners are off and the surrounding parts are cool.

2.Lift off the burner grates.

3.Wash the grates with warm-soapy water or in a dishwasher. Use a nonabrasive plastic scouring pad for heavily soiled areas. Rinse and dry well.

4.Replace burner grates.

with ammonia, white vinegar or warm water. For cooked-on soil, use a medium- to stiff-bristle tooth brush. DO NOT USEHARD OR SHARPOBJECTSTO CLEAN IGNlTOR SLOT. DO NOT USE CLEANING SOLUTIONS.

NOTE: Ignitor slot should remain clean as long as burner cap is seated properly on burner. Occasionally check burner cap to make sure it is level and covers burner completely.

Gas must flow freely through the ignitor slot for the burner to light properly. This area must be free of any soil and be kept protected from boil-overs and spill-avers. ALWAYS keep the burner caps in place whenever a surface burner is in

The control knobs

1.Turn control knobs to the off position.

2.PuIl control knobs and command buttons straight off.

3.Wash in warm, soapy water.

4.Rinse well and dry completely. Do not soak.

The surface burners and

cooktopBurnercap

use.

5.After cleaning the igniter slot, replace the burner cap and burner grate.

Typical surfaceburner flame

The control panel

1.Wipe with warm, soapy water or spray glass cleaner, and a soft cloth.

2.Rinse well.

3.Dry with soft cloth.

4.Replace control knobs and command buttons by pushing them firmly into place.

NOTE: When cleaning, never use steel wool. abrasives, or commercial oven cleaners which may damage the finish. After cleaning, make sure alI control knobs point to the off position. Make sure you have not turned oven on when replacing buttons. If oven has been turned on, push Set/Cancel button.

The cooktop and burner box areas are specially designed to make cleaning easier. Since the four burners are sealed, cleanups are easy and convenient.

Cleaning the burners

Always clean the burner caps after a spill-over. Keeping the burner caps clean wil.l prevent improper ignition and an uneven flame. To clean, use warm, soapy water and a soft cloth.

If burner caps must be removed for soaking, follow these steps:

1.Removethe burner grates and burner caps by pulling upward.

2.Soakburner cap in warm, soapy water.

3.After soaking, wipe with a soft cloth or a nonabrasive scrubbing pad or cleanser. Do not clean burner cap in dishwasher or Self- Cleaning Oven. Rinse and dry well.

4.For proper flow of gas and ignition of the burner, DO NOT ALLOW SPILLS,FOOD,CLEANING AGENTS ORANY OTHER MATERIAL TO ENTER THE IGNITOR SLOT.If the slot becomes

6.Occasionally check the burner flames for proper size and shape as shown. If flames lift off ports, are yellow, or are noisy when turned off, you may need to clean the burners. If ports are clogged, clean with a cotton swab or a soft cloth. If needed, use swab or cloth with ammonia, white vinegar or warm water. For cooked-on soil, use a medium- to stiff-bristle tooth brush, brushing out away from center of burner. If adjustment is needed, call a qualified technician for service.

7.To replace burner cap, make sure cap is properly aligned and leveled. Make sure that the locating pegs in the burner body fit into the recess in the underside of the cap. The cap must be correctly seated on the burner body for proper operation of the burner.

continued on next page

Page 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents UGRiiiid ContentsImportant Safety Instructions For Your Safety nAge Burned Parts & Features ’ Save These InstructionsNot shown Using Your Range Timer Time/Temp Set Kuob Using the electronicSetting the clock To cancel the Minute TimerTIMElNMINuTEs FireHazardUsing the electronic oven control ResultTo start baking/roasting now and stop automatically Storage drawer Oven ventReplacing the storage drawer To verify that the anti-tip brackets is engagedCaring For Your Range Using the Self-Cleaning cycle Before you staxtOven burner To stop the Self-Cleaning cycle at any time Setting the controlsSelf-Cleaning cycle-three-hour setting How it worksWhat to USE HOW to CleanTo replace the oven light Oven lightBefore You Call For Service Check ifWhattojio Operating Problem Control knobs will not Oven temperature seems too low or too highWhattodo Full ONE Year Warranty Length of Warrantyproductscovered What WE will PAY forWarranty What WE will not PAY for HOW to GET Service or Assistance

FGS397X specifications

The Roper FGS397X is an advanced residential electric range that blends modern technology with user-friendly features, designed to enhance the cooking experience for home chefs. Known for its reliability and efficiency, this model stands out with a variety of characteristics that cater to both everyday cooking and gourmet meal preparation.

One of the standout features of the Roper FGS397X is its spacious oven capacity. With ample space for multiple dishes, the oven allows for simultaneous baking, roasting, or broiling, making it ideal for families or those who love to entertain. The baking elements are designed for even heat distribution, ensuring consistent cooking results.

The range is equipped with four burners that provide a mix of high and low heat options, enabling users to tackle a variety of cooking tasks. The burners include a powerful high-output burner ideal for boiling and searing, as well as simmer burners that are perfect for delicate sauces and reductions. This versatility meets the needs of both novice cooks and experienced chefs.

A notable technology integrated into the Roper FGS397X is its intuitive control panel. The ergonomic knobs are easy to grasp, even when hands are wet or greasy. Additionally, the range features a digital display that provides accurate temperature settings and cooking timers, making it easier to manage multiple dishes at once.

Cleaning is hassle-free with the Roper FGS397X, as the oven is equipped with a self-cleaning feature. This saves time and effort, allowing users to focus on cooking rather than cleaning. The smooth surface of the cooktop also facilitates easy cleaning, as spills can be wiped away without hassle.

Safety is a key consideration in kitchen appliances, and the Roper FGS397X incorporates features such as a flame failure device and a child lock, ensuring peace of mind while cooking. With a sleek design and durable construction, this range fits seamlessly into any kitchen aesthetic, combining functionality with a modern look.

In summary, the Roper FGS397X stands out as a dependable electric range equipped with essential features and innovative technologies. Its spacious oven, versatile burners, easy-to-use control panel, self-cleaning capability, and safety features make it a popular choice for anyone looking to elevate their home cooking experience. Whether baking cookies or preparing a holiday feast, the Roper FGS397X is a reliable partner in the kitchen.
Top Page Image Contents