BEVERAGE COMPARTMENT
Interior Light - Figure 14
The light is located behind the cover in the top of the interior.
The interior light can be turned on and off using the Light button. (Figure 14)
The light button indicator is illuminated when the interior light is turned ON.
Figure 14
Replacing the tube - Figure 15
To prevent possible injury due to an electrical shock, be sure to discon- nect the power cord or turn OFF the circuit breaker before replacing the interior light tube or cleaning the appliance.
To prevent possible injury due to broken glass, use hand protection when replacing the interior light tube.
•Unscrew the cover panel.
•Change the fluorescent tube.
•Replace cover panel and screw into place.
Figure 15
Additional Features
Pull-out Racks - Figure 16
The
Figure 16
Air Exchange with Activated Charcoal Filter - Figure 17
Your Liebherr beverage cooler is getting it’s fresh air through an active charcoal filter which is located in the back bottom right hand corner.
We recommend you replace the filter at least once a year. Filters can be obtained from your Liebherr Dealer or Distributor.
Removing the filter: Hold the filter by the handle. Turn it 90° to the left or right and remove.
Reinstalling the filter: Insert with the handle in a vertical position. Turn it 90° to the left or right until it clicks into place.
Figure 17
12