INSTALLATION
Fitting Dimensions - Figure 1
Figure 1
*Overall height can be increased by 2 inch (50 mm) by adjusting the feet.
Adjust to recess height using the four adjustable feet on the underside of the appliance.
Put the electrical outlet in a location where it does not interfere when the appliance is placed into its recess.
IMPORTANT
The fitting dimensions are actual, allow for additional clearance for sliding the appliance into its recess based on how you chose the final installation to look. Make sure your instal- lation does not block the ventilation grille.
(Figure 2)
Figure 2
Installation and Fitting - Figure 3
Figure 3
1.Connect the appliance to the dedicated outlet.
2.Slide the appliance into the recess.
3.Secure the appliance in the recess using
4 x 14 mm screws supplied with the appliance.
The screws can be installed into the counter or into the cabinet or frame on the sides of the appliance, or in any combination. Four screws must be used.
The appliance is adapted with a door opening lim- iter. The maximum opening angle is 100°.
The appliance must be attached to the cabinet or counter before it is used.
8