Liebherr HCS, 7081 411-01 manual Cleaning

Page 22

Cleaning

Cleaning

•To prevent possible injury due to an electrical shock, be sure to disconnect the power cord or turn OFF the circuit breaker before cleaning the appliance.

•To avoid injury or damage, do not use steam cleaning equipment to clean the appliance.

A compound of lukewarm water and dishwasher detergent is recommended for cleaning the appli- ance and equipment parts.

Use for stainless steel surfaces a good quality stainless steel cleaner only.

Do not use abrasive or scouring sponges. Do not use concentrated cleaning agents. NEVER use abrasive or acid cleaners or chemical solvents.

To avoid short-circuits, ensure no cleaning water penetrates into the electrical components when cleaning the appliance. Do not use a sponge or cloth that is overly wet.

•Remove all food from the refrigerator and freezer compartments and store on a cool place tempo- rarily. Store frozen food in other freezers if avail- able.

•Remove the door racks as shown in Figure 14.

•Remove vegetable drawers as shown in Figure 15.

•Remove glass shelves as shown in Figure 17.

•Pull out the upper freezer drawer completely. Remove the ice cube bin by moving upwards. The position of the ice cube bin is shown in Figure 19.

•Clean the equipment parts by hand with luke- warm water and dishwasher detergent.

Do not clean the equipment parts in a dishwasher. Strips of these parts could get loose.

•Clean the refrigerator and freezer drawers inte- rior with lukewarm water and dishwasher deter- gent.

•Dry all parts well with a cloth.

•Do not damage or remove the model plate on the inside of the appliance. It is very important for servicing your appliance.

Keep your stainless steel looking new by cleaning with a good quality stainless steel cleaner or polish monthly. High quality stainless steel cleaners and conditioners are commercially available.

DO NOT CLEAN WITH STEEL WOOL PADS or ABRASIVE PADS. Do not use cleaners that are not for use on stainless steel, such as glass, tile or counter cleaners. These types of cleaners can damage the surface permanently.

Stainless steel that is exposed to chlorine gas and moisture may have some discoloration. This discol- oration is normal. If your unit is used in this environ- ment, clean and polish your stainless steel more often.

If the surface discolors or rusting appears, clean it quickly with a non-abrasive cloth and protect it. Always clean and polish in the direction of the grain and finish.

•Open the bottom freezer drawer and unscrew the ventilation grille Figure 23.

•Remove the dust filter (Figure 24) and clean in a dishwasher or by hand with lukewarm water and dishwasher detergent.

•Install the dust filter and ventilation grille.

•Install all equipment parts and replace the food in the appliance.

•Turn the appliance on.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Use and Care Manual Additional benefits Table of Contents Please read and follow these instructions SafetyElectrical Safety Disposal of Old ApplianceImportant Safety Information Safety Regulations Disposal of CartonWater Filter Figure Installing the Water FilterWater Filter Removing the Water Filter FigureDescription of Refrigerator FeaturesDescription of appliance and equipment Figure Description of FreezerAppliance Temperature and control displayOperating and Control Elements , Figure Operating icons Control iconsTo increase the temperature Setting the Temperature FigureTo reduce the temperature OperationAudible alarm signal Figure Temperature Display FigurePower Failure/Frost-Control Exit setup mode Setup Mode FigureHow to activate the setup mode Supercool FigureHow to deactivate the Sabbath Mode = Sabbath ModeHow to activate the Sabbath Mode How to activate the door gasket heatingHow to adjust the water quantity = Temperature display modeHow to change the temperature display to degrees Celsius = Water quantity for Ice cube trayHow to activate the childproof lock = Drop symbol resetHow to reset the drop symbol How to deactivate the childproof lockArranging Food Figure Shelf Arrangement To install the vegetable drawerRefrigerator Compartment Repositioning the door racks FigureRepositioning the shelves Figure Interior LightRemoving the shelves Figure Freezer compartment description Freezer CompartmentFreezing Freezing with Superfrost Figure Freezing and StorageBleeding the Ice Maker Safety Instructions and WarningsIceMaker To Start the Ice MakerHow to activate the Ice Maker Vacation State Ice Maker at vacationsCleaning CleaningDefrosting Defrosting/VacationVacation Tips Troubleshooting Problem Possible Cause and RemedyService Number 2 and Appliance / serial number IceMaker TroubleshootingCustomer Service Figure Appliance InformationWarranty LIEBHERR WARRANTY PLAN

CS, HC, 7081 411-01, HCS specifications

The Liebherr HCS 7081 411-01 is a cutting-edge model within Liebherr's established line of heavy lifting equipment, renowned for its robust performance and advanced technologies. Designed for versatility and efficiency, this machine caters to diverse construction and industrial applications.

One of the standout features of the HCS 7081 is its impressive lifting capacity, which allows for heavy loads to be handled with precision and ease. This model incorporates a powerful hydraulic system that ensures optimal performance even under demanding conditions. The intelligent design of the hydraulic components maximizes power while reducing energy consumption, making it an environmentally friendly choice for modern construction needs.

The HCS 7081 is equipped with advanced control systems, providing operators with enhanced functionality and safety features. The intuitive interface simplifies operation, allowing for smoother controls and improved accuracy when maneuvering heavy loads. The system also integrates real-time monitoring capabilities, giving operators instant feedback on performance metrics such as load weight and handling conditions.

Safety is paramount in the design of the HCS 7081. It features multiple redundancy systems that protect against operational failures. This model includes a slew of safety devices, such as overload protection, emergency stop buttons, and automatic limit switches that prevent unsafe operations. Liebherr’s commitment to safety ensures operators can work with confidence, knowing that their equipment is designed to minimize risks.

The HCS 7081 also boasts exceptional mobility, facilitating easy transportation between job sites. Its all-terrain capability allows it to navigate various environments, making it ideal for both urban and remote locations. The machine's compact design does not compromise on power or stability, ensuring reliable performance regardless of the operating conditions.

Another noteworthy characteristic is its durability. Constructed with high-quality materials, the HCS 7081 is built to withstand the rigors of demanding job sites. Liebherr’s reputation for excellence in engineering is evident in the machine’s robust frame and components, ensuring longevity and reliability even in the toughest environments.

In summary, the Liebherr HCS 7081 411-01 presents a fusion of power, efficiency, and safety features that set a standard in the heavy lifting equipment sector. With its advanced technologies, operator-friendly controls, and strong build quality, it stands out as an invaluable asset for any construction or industrial operation.
Top Page Image Contents