General safety information

-Do not place appliance in areas of direct sunlight or next to a stove, heater or similar object.

-The energy consumption depends on the installation condi- tions, e.g. the ambient temperature (see 1.2) .

-Keep the time the appliance is open to a minimum.

-Store food logically.

-Ensure that all food is well packed and covered for storage. This will prevent frost from forming.

-First cool warm food to room temperature before storing it .

-If there is a thick layer of frost in the appliance: defrost the appliance.

2 General safety information

Danger for the user:

-This appliance is not designed for persons (including children) with physical, sensory or mental impairment or persons not having sufficient experience and knowledge, unless they are instructed in the use of the appliance and are initially super- vised by a person responsible for their safety. Keep children under supervision to ensure they do not play with the appli- ance.

-In case of a fault, pull out the mains plug (not by pulling the connecting cable) or switch off the fuse.

-Have any repairs to or intervention in the appliance, and any change of the mains power cable, carried out by the customer service only or by other specialised personnel trained for the purpose.

-When disconnecting the appliance from the supply, always take hold of the plug. Do not pull the cable.

-Install and connect the appliance only as instructed.

-Please keep these instructions in a safe place and pass them on to any subsequent owners.

Fire hazard:

- The refrigerant R 600a is environmentally friendly but flam- mable. Escaping refrigerant may ignite.

•Do not damage the refrigerant circuit pipes.

•Do not allow naked flames or ignition sources to enter the appliance.

•Do not use any electrical appliances in the interior (e.g. steam cleaners, heaters, ice cream maker etc.).

•If refrigerant escapes: eliminate naked flames or sources of ignition from the vicinity. Pull out the power plug. Venti- late the area well. Notify customer service.

-Do not store explosives or sprays using combustible propel- lants such as butane, propane, pentane, etc. in the appliance. Respective spray cans can be identified by reference to the contents printed on the can or by a flame symbol. Gases possibly escaping may ignite due to electrical components.

-Only store high-percentage alcohol in tightly sealed, upright containers. Alcohol possibly escaping may ignite due to elec- trical components.

Danger of tipping and falling:

-Do not misuse the plinth, drawers, doors etc. as a step or for support. This applies particularly to children.

Danger of food poisoning:

-Do not consume food which has been stored too long.

Danger of frostbite, numbness and pain:

-Avoid lasting skin contact with cold surfaces or refrigerated/ frozen food or take protective steps, e.g. wear gloves. Do not consume ice cream, water ice or ice cubes immediately and do not consume them too cold.

Please observe the specific information in the other sections:

		DANGER		identifies a situation involving direct
				danger which, if not obviated, may
				result in death or severe bodily injury.

		WARNING		identifies a dangerous situation
				which, if not obviated, may result in
				death or severe bodily injury.

		CAUTION		identifies a dangerous situation
				which, if not obviated, may result in
				minor or medium bodily injury.

		NOTICE		identifies a dangerous situation
				which, if not obviated, may result in
				damage to property.


		Note		identifies useful information and tips.

3 Controls and displays

3.1 Operating and control elements

(1)	On/Off button	(4)	Fig. 2
(1)	On/Off button	(4)	SuperFrost button
(2)	Setting button	(5)	Alarm button
(3)	Temperature display

3.2 Temperature display

The following are displayed in normal operation:

-the set freezing temperature The temperature display flashes:

-the temperature setting is being changed

-after switch-on the temperature is not yet cold enough

-the temperature has risen several degrees

4 Putting into operation

4.1 Transporting the appliance

CAUTION

Risk of injury and danger of damage as a result of incorrect trans- port!

u Transport the appliance in a packed condition. u Transport the appliance upright.

u Do not transport the appliance without assistance.

4.2 Installing the appliance

In the event that the appliance is damaged, contact the supplier immediately before connecting to the mains.

The floor at the site must be flat and level.

Do not install the appliance in a location where it is exposed to direct radiation of the sun, next to a cooker, heater and similar. The appliance is suitable for integrated, under-worktop use. Do not install the appliance without assistance.

UIG1313 specifications

The Liebherr UIG1313 is a cutting-edge machine that has been designed for heavy industrial and construction applications. Known for its robust performance and advanced features, this equipment is well-suited for demanding working environments.

One of the standout features of the UIG1313 is its powerful engine. It is equipped with a high-performance drive system that ensures optimal efficiency while minimizing fuel consumption. This not only enhances productivity but also reduces operational costs, making it an economical choice for businesses.

The UIG1313 boasts an impressive lifting capacity, allowing operators to handle heavy loads with ease. This capability is complemented by its advanced hydraulic system, which provides smooth and precise control while lifting or lowering materials. The responsive hydraulic functions significantly enhance the machine's versatility and make it suitable for various tasks, from material handling to construction.

Safety is a top priority for Liebherr, and the UIG1313 incorporates a range of safety features designed to protect both the operator and the equipment. These include an advanced anti-tipping system that ensures stability during operation and an intuitive control panel that provides real-time data on the machine's status.

Technologically, the UIG1313 is equipped with Liebherr's innovative telematics system. This technology allows for remote monitoring of the machine’s performance, enabling operators to track usage and maintenance needs effectively. By providing real-time insights, businesses can schedule maintenance proactively, reducing downtime and increasing productivity.

The machine’s ergonomic design enhances operator comfort, which is crucial for long working hours. The cabin is spacious, with excellent visibility and user-friendly controls that facilitate easier operation. Additionally, the UIG1313 features noise reduction technology, promoting a quieter work environment.

In terms of durability, the UIG1313 is built using high-quality materials that withstand the rigors of heavy use. The chassis is reinforced, providing exceptional stability and resistance against wear and tear. This robust construction ensures a longer lifespan, making it a wise investment for any fleet.

Overall, the Liebherr UIG1313 combines performance, safety, and advanced technology, making it a reliable choice for industries that require efficient and effective heavy machinery. It stands out in the market for its ability to adapt to various tasks while delivering consistent results. Whether used in construction, logistics, or other sectors, the UIG1313 remains a preferred option for professionals seeking quality and dependability.