Liebherr WS 17800 Operation, Operating and control elements, Switching the appliance on and off

Page 8

Operation

Operating and control elements

The electronic control panel uses touch capacitance technology. Any function can be activated by touching the corresponding icon.

The exact contact point is between the symbol and its label

1On/Off button (switching the appliance on and off)

2Fan switch

3Interior light On/Off button

4Display

5Button to activate a compartment to adjust its temperature

6Temperature setting buttons

7Audible warning On/Off button

Symbols in the display

Alarm (symbol flashes if the temperature inside the appliance is too high or too low)

Demo mode is activated

Sabbath mode is activated

Setup mode is activated (activating the child lock and adjusting the display brightness)

The interior fan runs constantly Child lock is activated

The interior light is switched on constantly

Temperature display

Upper compartment temperature display

Middle compartment temperature display Lower compartment temperature display

These symbols indicate which compartment is active so that its temperature can be adjusted.

Demo mode

Demo mode can be activated for presenting the appli- ance at exhibitions or in salesrooms as though in nor- mal operating mode. DEMO appears in the display.

When in this mode, the cooling circuit is switched off!

If this mode is activated by accident, it can be deacti- vated as detailed below.

Press

+

for 5 seconds.

Display =

 

 

Display =

The refrigeration unit switches on. The tem- perature display flashes.

The appliance is now in normal operating mode.

Switching the appliance on and off

Switching the appliance on

Press the On/Off button until the temperature display lights up.

Switching the appliance off

Keep the On/Off button pressed for approx. 3 seconds so that the temperature display goes out.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Use and Care Manual Thank you for your trust Additional benefitsFewer the grapes produced in an area, the better the wine Right environment for your winesTable of contents Safety Electrical safetyPlease read and follow these instructions Disposal of old ApplianceRating Important safety informationSafety regulations Safety instructions and warnings DimensionsUnpacking Disposal of cartonDescription of the appliance FeaturesSetting up Operating and control elements Switching the appliance on and offOperation Setting the temperature Door open alarmTemperature alarm Temperature alarm after a fault in the appliance= Display brightness Setup mode= Sabbath Mode = Temperature display mode = Child lockActivating the child lock Deactivating the child lockWine cooler compartment Interior lightAir exchange with activated charcoal filter LabelsSafety lock Presentation shelfInserting the wooden shelf Locking the applianceDefrosting/Cleaning Storage diagramCleaning DefrostingAppliance information TroubleshootingProblem Possible Cause and Remedy Reversing the door hinges Remove red safety bracket Door must now be held secure by somebody Push on pressure plates until they engage Screw hinge bracket into place Front view of top hinge bracket Adjusting the lateral tilt of the door LIEBHERR WARRANTY PLAN Warranty

WS 17800 specifications

The Liebherr WS 17800 is a state-of-the-art wheeled excavator that embodies the latest advancements in construction and heavy machinery technology. Designed for versatility and efficiency, this machine is suitable for a wide range of applications, including earthmoving, material handling, and demolition work. The WS 17800 stands out in the market due to its robust engineering, exceptional performance, and operator-friendly features.

At the heart of the Liebherr WS 17800 is its powerful and efficient engine, which provides high torque and optimized fuel consumption. This powerful engine allows the excavator to tackle demanding jobs without sacrificing performance. The machine is equipped with advanced hydraulic systems that offer excellent lifting capacity and precise control. This ensures that operators can carry out tasks smoothly, whether they are lifting heavy loads or performing delicate operations.

One of the noteworthy features of the WS 17800 is its innovative Liebherr hydraulic system, which integrates smart technology to enhance productivity and efficiency. The hydraulic drive enables rapid movement and precise maneuverability, allowing for quick cycle times and maximum output. Additionally, the machine's hydraulic components are designed for longevity and reliability, reducing maintenance downtime.

Ergonomics is a key focus in the design of the WS 17800, making the operator’s experience as comfortable as possible. The spacious cab is equipped with comfortable seating and an intuitive control layout, providing excellent visibility of the work area. The modern display interface offers real-time information regarding machine performance, enabling operators to make informed decisions on the fly.

The Liebherr WS 17800 also integrates safety features to protect both the operator and the worksite. Advanced stability systems and anti-tipping technology minimize the risk of accidents, while compliant design features ensure that the machine adheres to the highest safety standards.

Furthermore, the machine is designed for easy maintenance, with accessible components that reduce service time and increase uptime. Liebherr emphasizes sustainability and environmental stewardship, and the WS 17800 incorporates features that reduce emissions and noise levels, making it a responsible choice for modern construction projects.

In summary, the Liebherr WS 17800 is a powerful and versatile wheeled excavator that excels in both performance and operator comfort. With its advanced technologies, robust engineering, and commitment to safety, the WS 17800 is an ideal choice for construction professionals looking for a reliable and efficient machine.
Top Page Image Contents