Liebherr 7081998-0 General safety information, External dimensions of the appli- ance

Page 3

General safety information

1.4External dimensions of the appli- ance

Fig. 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model

h

a

g

e

e'

d

c

c'

G(P)12

851

553

611

624

653

1129

563

592

G1213

851

553

611

624

1129

563

GX823

631

553

611

624

653

1129

563

592

1.5 Saving energy

-

Always ensure good ventilation. Do not cover ventilation

-

openings or grille.

Do not place appliance in areas of direct sunlight or next to a

-

stove, heater or similar object.

The energy consumption depends on the installation condi-

-

tions, e.g. the ambient temperature (see 1.2) .

Keep the time the appliance is open to a minimum.

-

The lower the temperature setting, the higher the power

-

consumption.

Ensure that all food is well packed and covered for storage.

-

This will prevent frost from forming.

If there is a thick layer of frost in the appliance: defrost the

 

appliance.

Accumulated dust increases the energy consumption:

-Once a year, dust the refrigerating unit together with the metal grille of the heat exchanger at the back of the appliance.

2 General safety information

Danger for the user:

- This appliance is not designed for persons (including chil- dren) with physical, sensory or mental impairment or persons not having sufficient experience and knowledge, unless they are instructed in the use of the appliance and are initially supervised by a person responsible for their safety. Keep children under supervision to ensure they do not play with the appliance.

- When disconnecting the appliance from the supply, always take hold of the plug. Do not pull the cable.

- In the event of a fault pull out the mains plug or deactivate the fuse.

- Do not damage the mains power cable. Do not operate the appliance with a defective mains power cable.

-Have any repairs to or intervention in the appliance, and any change of the mains power cable, carried out by the customer service only or by other specialised personnel trained for the purpose.

-Install and connect the appliance only as instructed.

-Please keep these instructions in a safe place and pass them on to any subsequent owners.

Fire hazard:

- The refrigerant R 600a is environmentally friendly but flam- mable. Escaping refrigerant may ignite.

Do not damage the refrigerant circuit pipes.

Do not allow naked flames or ignition sources to enter the appliance.

Do not use any electrical appliances in the interior (e.g. steam cleaners, heaters, ice cream maker etc.).

If refrigerant escapes: remove any naked flames or sources of ignition from the leakage area. Ventilate the room well. Notify the after-sales service.

-Do not store explosives or sprays using combustible propel- lants such as butane, propane, pentane, etc. in the appli- ance. To identify these spray cans, look for the list of contents printed on the can, or a flame symbol. Gases possibly escaping may ignite due to electrical components.

-Keep burning candles, lamps and other items with naked flames away from the appliance so that they do not set the appliance on fire.

-Always store high-percentage alcohol in tightly sealed, upright containers. Alcohol possibly escaping may ignite due to electrical components.

Danger of tipping and falling:

-Do not misuse the plinth, drawers, doors etc. as a step or for support. This applies particularly to children.

Danger of food poisoning:

-Do not consume food which has been stored too long.

Danger of frostbite, numbness and pain:

-Avoid lasting skin contact with cold surfaces or refrigerated/ frozen food or take protective steps, e.g. wear gloves. Do not consume ice cream, water ice or ice cubes immediately and do not consume them too cold.

Please observe the specific information in the other sections:

 

DANGER

identifies a situation involving direct

 

 

danger which, if not obviated, may

 

 

result in death or severe bodily

 

 

injury.

 

WARNING

identifies a dangerous situation

 

 

which, if not obviated, may result in

 

 

death or severe bodily injury.

 

CAUTION

identifies a dangerous situation

 

 

which, if not obviated, may result in

 

 

minor or medium bodily injury.

 

NOTICE

identifies a dangerous situation

 

 

which, if not obviated, may result in

 

 

damage to property.

 

 

 

 

Note

identifies useful information and tips.

3

Image 3
Contents Operating instructions Contents Appliance at a glanceAppliance at a glance Saving energy General safety informationGeneral safety information External dimensions of the appli- anceControls and displays Controls and displaysPutting into operation Disposing of packaging Connecting the applianceControl ControlSuperFrost Setting the temperatureStorage life Thawing foodMaintenance MaintenanceMalfunction Decommissioning Switching off the applianceTaking the appliance out of service DecommissioningDisposing of the appliance

7081998-0 specifications

The Liebherr 7081998-0 is a robust and reliable component known for its versatility and exceptional performance in a variety of applications. This model is widely recognized in the heavy machinery sector, specifically within the context of excavators and other construction equipment. One of its notable features is its impressive lifting capacity, which allows it to handle substantial loads with ease, making it ideal for demanding job sites.

One of the defining characteristics of the Liebherr 7081998-0 is its advanced hydraulic technology. The hydraulic system is designed to provide optimal power and efficiency, allowing the operator to perform tasks smoothly and effectively. This ensures a high level of productivity without compromising safety, as the equipment is equipped with various safety mechanisms to prevent accidents.

The Liebherr 7081998-0 is also appreciated for its durability and longevity. Constructed from high-quality materials, it is built to withstand harsh working conditions, whether it involves extreme temperatures or rugged terrain. This resilience translates into lower maintenance costs and less downtime, which is crucial for maximizing operational efficiency on the job.

In terms of technology, the Liebherr 7081998-0 features an intuitive control system that enhances user experience. Operators can easily maneuver the equipment with precision, thanks to the ergonomic design of the controls. This improves not only performance but also operator comfort, allowing for extended work periods without undue strain.

Additionally, the environmental footprint of the Liebherr 7081998-0 has been a focal point in its design. It incorporates fuel-efficient technologies that comply with modern emission standards, making it a more sustainable choice for construction companies looking to minimize their impact on the environment.

Overall, the Liebherr 7081998-0 stands out in the heavy machinery market due to its combination of strength, efficiency, and technological innovation. Whether used in construction, mining, or other heavy-duty applications, this model represents a significant investment for professionals seeking reliable and powerful equipment that can meet the demands of their projects.