Controls and displays, Putting into operation

Controls and displays

3 Controls and displays

3.1 Operating and control elements

Fig. 3		(6)	Menu symbol
(1)	On/Off button	(6)	Menu symbol
(2)	Setting button	(7)	Alarm symbol
(3)	Temperature display	(8)	Brightness symbol
(4)	SuperFrost button	(9)	Child lock symbol
(5)	SuperFrost symbol

3.2 Temperature display

The following are displayed in normal operation:

-the set freezing temperature

The temperature display flashes:

-the temperature setting is being changed

-after switch-on the temperature is not yet cold enough

-the temperature has risen several degrees

4 Putting into operation

4.1 Transporting the appliance

CAUTION

Risk of injury and danger of damage as a result of incorrect transport!

u Transport the appliance in a packed condition. u Transport the appliance upright.

u Do not transport the appliance without assistance.

4.2 Installing the appliance

WARNING

Fire hazard due to dampness!

If live parts or the mains lead become damp this may cause short circuits.

u The appliance is designed for use in enclosed areas. Do not operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions.

WARNING

Risk of fire due to short circuit!

If the mains cable/connector of the appliance or of another appliance touch the rear of the appliance, the mains cable/ connector may be damaged by the appliance vibrations, leading to a short circuit.

u Stand the appliance so that it is not touched by connectors or main cables.

u Do not plug the appliance or any others into sockets located near the rear of the appliance.

WARNING

Fire hazard due to refrigerant!

The refrigerant R 600a is environmentally friendly but flam- mable. Escaping refrigerant may ignite.

u Do not damage the piping of the refrigeration circuit.

WARNING

Fire hazard and danger of damage!

u Do not place appliances emitting heat e.g. microwaves, toasters etc. on the appliance!

WARNING

Blocked ventilation openings pose a risk of fire and damage! u Always keep the ventilation openings clear. Always ensure

that the appliance is properly ventilated!

q In the event that the appliance is damaged, contact the supplier immediately before connecting to the mains.

q The floor at the site must be flat and level.

q Do not install the appliance in a location where it is exposed to direct radiation of the sun, next to a cooker, heater and similar.

q The ideal installation site is a dry, well ventilated room.

q Always stand the appliance with its back directly to the wall. q The appliance may be moved only when it is empty.*

q Do not install the appliance without assistance.

q Standard EN 378 specifies that the room in which you install your appliance must have a volume of 1 m2 per 8 g of R 600a refrigerant used in the appliance. If the room in which the appliance is installed is too small, a flammable gas-air mixture may form in the event of a leakage in the refrigera- tion circuit. The quantity of refrigerant used in your appliance is indicated on the type plate on the inside of the appliance.

u Detach the connecting cable from the rear of the appliance, removing the cable holder at the same time because other- wise there will be vibratory noise!

u Remove all transit supports.

u Dispose of packaging material (see 4.5) . u Align the appliance so that it

stands firmly and on a level by applying the accompanying spanner to the adjustable- height feet (A) and using a spirit level.

Note

u Clean the appliance (see 6.2) .

If the appliance is installed in a very damp environment, condensate may form on the outside of the appliance.

u Always see to good ventilation at the installation site.

4.3 Changing over the door hinge*

You can change over the door hinges if necessary. Make sure that the following tools are at hand:

q Supplied open-ended wrench

7081998-0 specifications

The Liebherr 7081998-0 is a robust and reliable component known for its versatility and exceptional performance in a variety of applications. This model is widely recognized in the heavy machinery sector, specifically within the context of excavators and other construction equipment. One of its notable features is its impressive lifting capacity, which allows it to handle substantial loads with ease, making it ideal for demanding job sites.

One of the defining characteristics of the Liebherr 7081998-0 is its advanced hydraulic technology. The hydraulic system is designed to provide optimal power and efficiency, allowing the operator to perform tasks smoothly and effectively. This ensures a high level of productivity without compromising safety, as the equipment is equipped with various safety mechanisms to prevent accidents.

The Liebherr 7081998-0 is also appreciated for its durability and longevity. Constructed from high-quality materials, it is built to withstand harsh working conditions, whether it involves extreme temperatures or rugged terrain. This resilience translates into lower maintenance costs and less downtime, which is crucial for maximizing operational efficiency on the job.

In terms of technology, the Liebherr 7081998-0 features an intuitive control system that enhances user experience. Operators can easily maneuver the equipment with precision, thanks to the ergonomic design of the controls. This improves not only performance but also operator comfort, allowing for extended work periods without undue strain.

Additionally, the environmental footprint of the Liebherr 7081998-0 has been a focal point in its design. It incorporates fuel-efficient technologies that comply with modern emission standards, making it a more sustainable choice for construction companies looking to minimize their impact on the environment.

Overall, the Liebherr 7081998-0 stands out in the heavy machinery market due to its combination of strength, efficiency, and technological innovation. Whether used in construction, mining, or other heavy-duty applications, this model represents a significant investment for professionals seeking reliable and powerful equipment that can meet the demands of their projects.