Liebherr 7080 904-00 Disposal notes, Contents, Safety instructions and warnings, Climate rating

Page 2

Disposal notes

The packaging is made of recyclable materials.

-Corrugated board/board

-EPS moulded parts

-Polythene sheets

-Polypropylene straps

Keep packaging materials away from children - polythene sheets and bags can cause suffocation!

Please return the packaging to an official collection point.

Your old appliance: This contains some reusable materials and should be disposed of properly - not simply with unsorted household refuse.

Discarded appliances should be disabled: Remove the plug, cut through the connection cable and render the catch unusable so that children cannot become trapped inside.

Ensure that the refrigerant circuit is not damaged when the appliance that is no longer needed is taken away for disposal.

Details of the refrigerant can be found on the type plate.

Appliances which are no longer needed must be disposed of in a professional and appropriate way, in accordance with the current local regulations and laws.

Contents

Page

Setting up, Connecting to the mains

 

Saving energy

 

Dimensions

 

Switching the appliance on and off

 

Setting the temperature

 

The red warning-LED

7

Notes on freezing and storage

 

Freezing, storage

 

Defrosting, Cleaning

8

Malfunctions, Shutting down

 

Changing over door hinges

9

Operating elements

VarioSpace

Info-System

Drawers

Type plate

Adjustable height feet

Safety instructions and warnings

To prevent injury or damage to the unit, the appliance should be unpacked and set up by two people.

In the event that the appliance is damaged on delivery, contact the supplier immediately before connecting to the mains.

To guarantee safe operation, ensure that the appliance is set up and connected as described in these operating instructions.

Disconnect the appliance from the mains if any fault occurs. Pull out the plug, switch off or remove the fuse.

When disconnecting the appliance, pull on the plug, not on the cable.

Any repairs and work on the appliance should only be carried out by the customer service department, as unauthorised work could prove highly dangerous for the user. The same applies to changing the mains power cable.

Do not allow naked flames or ignition sources to enter the ap- pliance. When transporting and cleaning the appliance ensure that the refrigerant circuit is not damaged. In the event of dam- age, make sure that there are no ignition sources nearby and keep the room well ventilated.

Do not stand on the plinth, drawers or doors or use them to support anything else.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given initial supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be su- pervised to ensure that they do not play with the appliance.

Avoid prolonged skin contact with cold surfaces or chilled/ frozen food. This could cause pain, numbness and frostbite. In the case of prolonged skin contact, protective measures should be taken, e.g. gloves should be worn.

Do not eat ice cream, particulary ice lollies or ice cubes, imme- diately after taking them from the freezer compartment as there is a risk of "burning" because of the very cold temperatures.

Do not consume food which has been stored for too long, as it could cause food poisoning.

The appliance is suitable solely for cooling food in a domestic environment or similar. This includes use in, for example

-in staff kitchenettes, bed and breakfast establishments,

-by guests in country homes, hotels, motels and other forms of accommodation,

-in catering and similar services in the wholesale trade. Use the appliance solely as is customary within a domestic environment. All other types of use are inadmissible. The ap- pliance is not suitable for storing and cooling medicines, blood plasma, laboratory preparations or similar substances and products covered by the 2007/47/EC Medical Devices Direc- tive. Misuse of the appliance can result in the stored products suffering harm or perishing. Furthermore, the appliance is not suitable for operation in potentially explosive atmospheres.

Do not store explosives or sprays using combustible propellants such as butane, propane, pentane etc. in the appliance. Electri- cal components might cause leaking gas to ignite. You may identify such sprays by the printed contents or a flame symbol.

Do not use electrical appliances inside the appliance.

This instruction describes many models of appliances. Please bear in mind that individual models may differ slightly from these instructions.

Climate rating

The appliance is set to operate within specific ambient temperature limits according to its climate rating. These temperature limits should not be exceeded. The correct climate rating for your appliance is indicated on the type plate.

Climate rating

Ambient temperatures

SN, N

up to +32

°C

ST

up to

+38

°C

T

up to

+43

°C

-The appliance will function properly in ambient temperatures of down to +5°C.

6

Image 2
Contents Diepvrieskast GefrierschrankFreezer CongelateurDisposal notes ContentsSafety instructions and warnings Climate ratingDimensions G Setting upConnecting to the mains Setting the temperatureFreezing, storage CleaningInfo-System DefrostingMalfunctions Appliance designation 1, service number 2, appliance numberTemperature is not low enough Shutting your appliance down

7080 904-00 specifications

The Liebherr 7080 904-00 is a versatile and robust material handler known for its efficiency and performance in heavy-duty applications. This sophisticated machine is particularly designed for material logistics, waste management, and recycling operations, providing excellent solutions for various industries.

One of the standout features of the Liebherr 7080 904-00 is its powerful Liebherr diesel engine, delivering high torque and exceptional fuel efficiency. This engine not only meets stringent emissions regulations but also ensures minimization of operational costs. The hydraulic system is designed for optimal power distribution, allowing for superb lifting capacities and fast working cycles, critical for maximizing productivity.

This material handler boasts a reach of up to 16 meters, providing operators with excellent versatility in various applications. The maximum lifting height and outreach allow it to handle a wide range of jobs, from loading and unloading to sorting and stacking materials. Equipped with various attachment options, including grapples, clamps, and buckets, the Liebherr 7080 904-00 can easily adapt to specific job requirements.

Safety and operator comfort are also prioritized in the design of this machine. The spacious and ergonomically designed cab is equipped with advanced control systems and visibility features, ensuring that operators have a clear view of their work area while maintaining comfort during long hours of operation. The intuitive joystick controls enhance precision and responsiveness, allowing operators to perform intricate tasks with ease.

Additionally, the Liebherr 7080 904-00 features advanced monitoring systems that provide real-time feedback on machine performance. These technologies help operators and fleet managers track operational efficiency, fuel consumption, and maintenance needs, contributing to better decision-making and lower total cost of ownership.

The undercarriage is designed for stability, with high ground clearance and wide tracks, ensuring that the machine can handle rough terrain and challenging work environments. This stability is crucial when lifting and transporting heavy loads, reducing the risk of tipping and enhancing overall safety.

In summary, the Liebherr 7080 904-00 is a highly capable material handler that combines powerful performance with advanced technology and operator-friendly design. Its versatility, safety features, and efficiency make it an ideal choice for professionals looking for a reliable machine to tackle demanding tasks in various industrial settings.