Liebherr 7085592-01 Putting into operation, Transporting the appliance, Installing the appliance

Page 5

Putting into operation

4 Putting into operation

4.1 Transporting the appliance

CAUTION

Risk of injury and danger of damage as a result of incorrect transport!

u Transport the appliance in a packed condition. u Transport the appliance upright.

u Do not transport the appliance without assistance.

4.2 Installing the appliance

WARNING

Fire hazard due to dampness!

If live parts or the mains lead become damp this may cause short circuits.

u The appliance is designed for use in enclosed areas. Do not operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions.

WARNING

Risk of fire due to short circuit!

If the mains cable/connector of the appliance or of another appliance touch the rear of the appliance, the mains cable/ connector may be damaged by the appliance vibrations, leading to a short circuit.

u Stand the appliance so that it is not touched by connectors or main cables.

u Do not plug the appliance or any others into sockets located near the rear of the appliance.

WARNING

Fire hazard due to refrigerant!

The refrigerant R 600a is environmentally friendly but flam- mable. Escaping refrigerant may ignite.

u Do not damage the piping of the refrigeration circuit.

WARNING

Fire hazard and danger of damage!

u Do not place appliances emitting heat e.g. microwaves, toasters etc. on the appliance!

WARNING

Blocked ventilation openings pose a risk of fire and damage! u Always keep the ventilation openings clear. Always ensure

that the appliance is properly ventilated!

NOTICE

Risk of damage due to condensate!

u Do not install the appliance directly alongside a further refrigerator/freezer.

q In the event that the appliance is damaged, contact the supplier immediately before connecting to the mains.

q The floor at the site must be flat and level.

q Do not install the appliance in a location where it is exposed to direct radiation of the sun, next to a cooker, heater and similar.

q The ideal installation site is a dry, well ventilated room.

q Always stand the appliance backed directly to the wall using the enclosed wall spacers (see below).

q The appliance may be moved only when it is empty. q Do not install the appliance without assistance.

q The more R 600a refrigerant there is in the appliance, the larger the room in which the appliance is standing needs to be. In rooms that are too small, a flammable mix of gas and air may be created if there is a leak. According to the EN 378 standard, every 11 g of R 600a refrigerant requires at least 1 m3 space in the room for the appliance. The amount of refrigerant in your appliance is on the type plate inside the appliance.

u Detach the connecting cable from the rear of the appliance, removing the cable holder at the same time because other- wise there will be vibratory noise!

u Remove the protective film from the decorative trims. u Remove all transit supports.

The spacers supplied with some appliances must be used to achieve the stated energy consumption. These will extend the depth of the appliance by approx. 35 mm. The appliance is fully functional if the spacers are not used, but does have a slightly higher energy consumption.

u In the case of an appliance with enclosed wall spacers, mount the wall spacers on the back of the appliance at the top left and right.

uDispose of packaging material (see 4.5) .

uAlign the appliance so that it stands firmly and on a level by applying the accompanying spanner to the adjustable- height feet (A) and using a spirit level.

Note

u Clean the appliance (see 6.2) .

If the appliance is installed in a very damp environment, condensate may form on the outside of the appliance.

u Always see to good ventilation at the installation site.

4.3 Changing over the door hinges

You can change over the door hinges if necessary. Ensure that the following tools are to hand:

q Torx 25

q Torx 15

q Open-ended spanner size 6 q Screwdriver

q Open-ended spanner included in supply package q Second person for fitting work, if needed

* Depending on model and options

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents GN / GNP 101114 7085592Appliance at a glance ContentsAppliance at a glance General safety information General safety informationControls and displays Temperature displayControls and displays Operating and control elementsPutting into operation Installing the appliancePutting into operation Transporting the applianceAt the top, use a screwdriver to unclip cover 7 Control ControlFreezing food Setting the temperatureThawing food SuperFrostMaintenance MaintenanceTaking the appliance out of service Switching off the applianceMalfunctions MalfunctionsDisposing of the appliance Disposing of the appliance

7085592-01 specifications

The Liebherr 7085592-01 is a cutting-edge component that exemplifies the advanced engineering and innovative technologies characteristic of Liebherr's product line. This particular part serves a critical role in the operation of Liebherr machinery, enhancing efficiency and reliability in a variety of applications.

One of the main features of the Liebherr 7085592-01 is its robust construction, designed to withstand the demanding environments typical in construction, mining, and industrial applications. The component is manufactured from high-quality materials that ensure optimum durability and longevity. This resiliency minimizes downtime, allowing for seamless operations, which is crucial for maximizing productivity on job sites.

In terms of technology, the Liebherr 7085592-01 incorporates advanced engineering principles that ensure precision and reliability. The component is designed with modern manufacturing techniques that guarantee a high degree of accuracy, which is essential for maintaining the performance standards expected from Liebherr products. This precision is further complemented by compatibility with a range of heavy equipment models, making it a versatile choice for various operational needs.

Another significant characteristic of the Liebherr 7085592-01 is its ease of installation and maintenance. The design facilitates straightforward assembly, enabling operators and technicians to replace or install the component quickly, thus reducing overall downtime. The user-friendly design is a testament to Liebherr’s commitment to not only enhancing performance but also ensuring that their products are accessible for maintenance and service.

Additionally, the 7085592-01 benefits from Liebherr’s comprehensive approach to quality assurance. Each component undergoes rigorous testing and inspection, ensuring it meets the high standards synonymous with the Liebherr brand. This attention to detail ensures that customers receive a product that not only performs exceptionally well but also adheres to safety regulations and operational guidelines.

In conclusion, the Liebherr 7085592-01 is more than just a component; it represents Liebherr’s dedication to innovation, durability, and customer satisfaction. Its robust design, technological sophistication, and ease of use make it an indispensable part of Liebherr’s machinery, affirming the company’s position as a leader in the heavy equipment industry. Whether it’s used in construction, mining, or any other heavy-duty application, this component stands ready to deliver optimal performance, ensuring that users can rely on Liebherr equipment to get the job done efficiently and effectively.
Top Page Image Contents