Liebherr 7085592-01 Freezing food, Thawing food, Setting the temperature, SuperFrost, Drawers

Page 8

Control

-too much warm ambient air flowed in when rearranging and removing food

-power failure for some time

-the appliance is faulty

The audible alarm is automatically silenced, the alarm button Fig. 3 (5) goes out and the temperature display stops flashing when the temperature is sufficiently cold again.

If the alarm status persists: (see Malfunction).

Note

Food may be spoilt if the temperature is not cold enough.

u Check the quality of the food. Do not consume spoiled food.

5.2.1 Muting the temperature alarm

The audible alarm can be muted. When the temperature is sufficiently cold again, the alarm function is active again.

u Press alarm button Fig. 3 (5). w The audible alarm is silenced.

5.3 Freezing food

The rating plate indicates the maximum quantity of fresh food you can freeze within 24 hours (see Appliance at a glance) under “Freezing capacity ... kg/24h”.

The maximum load for the top drawer is 15 kg and for the other drawers 25 kg each.

The shelves can each be loaded with 55 kg of frozen food.

If the door cannot be opened right after having been closed, due to vacuum, please wait about 2 minutes until pressure returns to normal.

CAUTION

Risk of injury due to broken glass!

Bottles and cans containing drinks may burst when being frozen. This applies particularly to sparkling drinks.

u Do not freeze bottles and cans containing drinks!

In order that the food is rapidly frozen through to the core, do not exceed the following quantities per pack:

- Fruit, vegetables up to 1 kg - Meat up to 2.5 kg

u Pack the food in portions in freezer bags, reusable plastic, metal or aluminium containers.

5.4 Thawing food

- in the refrigerator compartment - in a microwave oven

- in a conventional or fan oven - at room temperature

u Food once thawed should be re-frozen only in exceptional cases.

5.5 Setting the temperature

Temperature setting to be recommended: -18 °C

The temperature can be changed continuously. Once the -32 °C setting is reached, it starts again with -15 °C.

u To access temperature adjustment: press setting button Fig. 3 (2) once.

w The LED of the current temperature flashes in the tempera- ture display.

u Press the setting button Fig. 3 (2) the number of times needed until the required temperature shines in the LED display.

Note

u Long pressing of the setting button sets a slightly colder value within a small temperature range (e.g.: between -15 °C and -18 °C). The LED of the next lower temperature range then shines in the temperature display.

5.6 SuperFrost

With this function you can freeze fresh food quickly through to the core. The appliance operates with maximum refrigeration. The noise of the refrigeration unit may be temporarily louder as a result.

The maximum amount of fresh food which can be frozen in 24 h is indicated on the type plate under “freezing capacity ... kg/ 24h”. This amount varies according to the model and climate rating.

You have to activate SuperFrost in good time, depending on how much fresh food is to be frozen: about 6 hours before placing the food inside in case of small amounts and about 24 hours in advance in case of the maximum amount of food to be frozen.

Wrap produce and spread it out as far as possible. Do not allow produce to be frozen to touch produce that is already frozen to prevent the latter thawing.

You do not have to activate SuperFrost in the following cases:

-when placing frozen food in the freezer

-when freezing up to approx. 2 kg fresh food daily

5.6.1 Freezing with SuperFrost

uBriefly press the SuperFrost button Fig. 3 (4). w The SuperFrost button shines.

w The freezer temperature drops, the appliance operates with the maximum refrigerating capacity.

In case of a small amount of food to be frozen:

uwait approx. 6 h.

uPlace wrapped produce in the deep bottom drawers.

In case of the maximum amount of food to be frozen (see type plate):

uwait about 24 h.

uRemove the deep bottom drawers and place produce directly on the bottom shelves.

SuperFrost is automatically deactivated after about 65 h. The SuperFrost button extinguishes once freezing is completed.

Place produce in the drawers and push the latter back in again.

The appliance continues to operate in the energy-saving,

normal mode.wwuw

5.7 Drawers

Note

The energy consumption increases and the cooling perform- ance decreases if there is insufficient ventilation.

For appliances with NoFrost:

u Leave the bottom drawer in the appliance!

u Always keep the air slits of the fan free at the rear wall!

u To store frozen food directly on the shelves: pull the drawer forwards and lift it out.

8

* Depending on model and options

Image 8
Contents 101114 7085592 GN / GNPAppliance at a glance ContentsAppliance at a glance General safety information General safety informationTemperature display Controls and displaysControls and displays Operating and control elementsInstalling the appliance Putting into operationPutting into operation Transporting the applianceAt the top, use a screwdriver to unclip cover 7 Control ControlSetting the temperature Freezing foodThawing food SuperFrostMaintenance MaintenanceSwitching off the appliance Taking the appliance out of serviceMalfunctions MalfunctionsDisposing of the appliance Disposing of the appliance

7085592-01 specifications

The Liebherr 7085592-01 is a cutting-edge component that exemplifies the advanced engineering and innovative technologies characteristic of Liebherr's product line. This particular part serves a critical role in the operation of Liebherr machinery, enhancing efficiency and reliability in a variety of applications.

One of the main features of the Liebherr 7085592-01 is its robust construction, designed to withstand the demanding environments typical in construction, mining, and industrial applications. The component is manufactured from high-quality materials that ensure optimum durability and longevity. This resiliency minimizes downtime, allowing for seamless operations, which is crucial for maximizing productivity on job sites.

In terms of technology, the Liebherr 7085592-01 incorporates advanced engineering principles that ensure precision and reliability. The component is designed with modern manufacturing techniques that guarantee a high degree of accuracy, which is essential for maintaining the performance standards expected from Liebherr products. This precision is further complemented by compatibility with a range of heavy equipment models, making it a versatile choice for various operational needs.

Another significant characteristic of the Liebherr 7085592-01 is its ease of installation and maintenance. The design facilitates straightforward assembly, enabling operators and technicians to replace or install the component quickly, thus reducing overall downtime. The user-friendly design is a testament to Liebherr’s commitment to not only enhancing performance but also ensuring that their products are accessible for maintenance and service.

Additionally, the 7085592-01 benefits from Liebherr’s comprehensive approach to quality assurance. Each component undergoes rigorous testing and inspection, ensuring it meets the high standards synonymous with the Liebherr brand. This attention to detail ensures that customers receive a product that not only performs exceptionally well but also adheres to safety regulations and operational guidelines.

In conclusion, the Liebherr 7085592-01 is more than just a component; it represents Liebherr’s dedication to innovation, durability, and customer satisfaction. Its robust design, technological sophistication, and ease of use make it an indispensable part of Liebherr’s machinery, affirming the company’s position as a leader in the heavy equipment industry. Whether it’s used in construction, mining, or any other heavy-duty application, this component stands ready to deliver optimal performance, ensuring that users can rely on Liebherr equipment to get the job done efficiently and effectively.