Liebherr 7080 361-03, CI16, CS16, C16 manual Defrosting/Cleaning, Vacation Tips

Page 19

Defrosting/Cleaning

Defrosting

Refrigerator compartment:

The refrigerator compartment

 

defrosts automatically. The

 

water that forms on the rear wall

 

drains into a reservoir at the

 

back of the appliance and evap-

 

orates automatically through the

 

compressor heat.

Figure 18

Ensure the defrost water can flow freely through the drain hole in the rear wall (Figure 18).

Freezer compartment:

The No-frost system automatically defrosts the freezer compartment. Any moisture will collect on the evaporator and freeze. It will periodically defrost and evaporate.

Cleaning

•To prevent possible injury due to an electrical shock, be sure to disconnect the power cord or turn OFF the circuit breaker before replacing the interior light bulb(s) or cleaning the appliance.

•To avoid injury or damage, DO NOT use steam cleaning equipment to clean the appliance.

Clean the appliance by hand with lukewarm water and a little detergent.

DO NOT use abrasive or scouring sponges. DO NOT use concentrated cleaning agents. NEVER use abrasive or acid cleaners or chemical solvents.

•Ensure no cleaning water penetrates into the electrical components or ventilation grille.

•Dry all parts well with a cloth.

•Remove dust from the refrigerator unit and heat exchanger and the metal grid at the back of the appliance. This should be done at least once a year.

•DO NOT damage or remove the model plate on the inside of the appliance. It is very important for servicing your appliance.

Keep your stainless steel looking new by cleaning with a good quality stainless steel cleaner or polish monthly. High quality stainless steel cleaners and conditioners are commercially available.

DO NOT CLEAN WITH STEEL WOOL PADS or ABRASIVE PADS. DO NOT use cleaners that are not for use on stainless steel, such as glass, tile or counter cleaners. These types of cleaners can damage the surface permanently.

Stainless steel that is exposed to chlorine gas and moisture may have some discoloration. This discol- oration is normal. If your unit is used in this environ- ment, clean and polish your stainless steel more often.

If the surface discolors or rusting appears, clean it quickly with a non-abrasive cloth and protect it. Always clean and polish in the direction of the grain and finish.

Vacation Tips

Short vacations:

It is not necessary to turn OFF the refrigerator and freezer if you will be away for less than four weeks.

•Use all perishables.

•Freeze other items.

•Turn OFF the icemaker.

•Shut off the water supply to the icemaker.

Long vacations:

If you will be away for a month or more:

•Remove all food from the refrigerator and freezer compartments.

•Turn OFF the refrigerator and freezer compart- ments.

•Clean the appliance. Refer to Cleaning.

•Leave the door open to prevent unpleasant odors. This will also keep mold from building up.

•Turn OFF the icemaker.

•Shut off the water supply to the icemaker.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Use and Care Manual Additional benefits Features Please Read and Follow These Instructions Table of Contents Important Safety Information SafetyDisposal of Old Appliance Safety Instructions and Warnings Electrical SafetyIceMaker if equipped Unpacking Safety RegulationsDisposal of Carton Turning the Appliance on Changing the TemperatureSetting the Temperature Figure OperationChildproof Lock Figure Temperature Display FigureAudible alarm signal Figure Audible/visual temperature alarmHow to deactivate the Sabbath Mode Power Failure/Frost-ControlSabbath Mode How to activate the Sabbath ModeRepositioning the shelves Figure Adjusting the bottle HolderRefrigerator Compartment Arranging Food Figure Shelf ArrangementBulb data To install the vegetable drawerInterior Light To remove the vegetable drawerInformation System Figure Freezer CompartmentFreezing, Storage Freezing with Superfrost FigureDo Not Freeze Freezing and StorageFood to Freeze Water Connection IceMakerConnection to the Water Supply To turn off To Clean the IceMakerTo Start the IceMaker To turn onProblem Possible Cause and Remedy IceMaker TroubleshootingVacation Tips Defrosting/CleaningCleaning DefrostingFailure/Frost-Control Display­ TroubleshootingService Number 2 and Appliance / serial number Customer Service FigureAppliance Information
Related manuals
Manual 26 pages 5.74 Kb

7080 361-03, C16, CS16, CI16 specifications

Liebherr, a name synonymous with high-quality engineering and innovation in the machinery and construction industry, has made waves with its latest models, the CI16 and CS16. These compact excavators are designed to deliver superior performance and efficiency in various applications, making them a popular choice among contractors and operators alike.

The Liebherr CI16 and CS16 are equipped with powerful diesel engines that provide ample horsepower while ensuring low fuel consumption and emissions. The machines are built with an emphasis on energy efficiency, adhering to the latest environmental regulations without compromising on performance. The engines support advanced technologies such as common rail fuel injection and turbocharging, which enhance power output and efficiency.

One of the standout features of the CI16 and CS16 models is their compact design, allowing operators to maneuver easily in confined spaces. This is particularly beneficial in urban environments or restricted job sites where larger machinery may struggle. Despite their smaller size, these excavators boast impressive digging and lifting capacities, making them capable of handling a wide range of tasks, from excavation to landscaping and trenching.

The ergonomic cab design of both models ensures that operators enjoy a comfortable working environment. The spacious cabin is equipped with adjustable seating, climate control, and advanced visibility, providing a clear line of sight to the work area. The intuitive controls enable precise operation, reducing operator fatigue and enhancing productivity throughout the workday.

Both CI16 and CS16 feature advanced hydraulic systems that provide quick response times and smooth operation. The option to customize hydraulic flow allows operators to tailor the machine's performance based on the attachments being used, maximizing versatility. Various attachments are compatible, including buckets, hammers, and grapples, further extending the utility of these machines.

Safety is paramount in the design of the Liebherr CI16 and CS16. Each excavator is equipped with features such as a reinforced cab structure, emergency stop buttons, and advanced monitoring systems. These ensure both operator safety and the protection of job site personnel.

Overall, the Liebherr CI16 and CS16 models represent a blend of power, efficiency, and precision. Their advanced technologies and user-focused design make them ideal for modern construction and landscaping challenges, solidifying Liebherr's commitment to innovation in the machinery industry. Whether for major construction projects or smaller jobs, these excavators offer the reliability and performance that Liebherr is known for.
Top Page Image Contents