Operation, Turning the Appliance on | Liebherr CS16, CI16, C16

Operation

Turning the Appliance ON and

OFF - Figure 2

Clean the appliance before turning it on for the first time. See Cleaning.

Allow the appliance to operate approximately two hours before placing food in it. DO NOT place fro- zen food in the freezer until the temperature shows at least 0°F / -18°C. The refrigerator and freezer compartments can be operated separately.

1.Turning ON: Press the Refrigerator ON/OFF button 9and the Freezer ON/OFF button 3so the Temperature Displays 1and 7light up or “flash.”

•The interior light will turn ON when the refrigera- tor door is open.

•The alarm will sound when the freezer is turned ON for the first time and when the appliance is “warm.”

2.Press the Alarm button 5to turn it OFF. See Audible Warning Signal.

3.Turning OFF: Press the Refrigerator ON/OFF button 9and the Freezer ON/OFF button 3 again so the temperature displays go out.

Changing the Temperature

Display - Figure 2

The temperature reading can be displayed in either degrees Fahrenheit or degrees Celsius.

When the appliance is first turned on or after a power failure, the refrigerator Temperature Display and Setting Display 7will show the set tempera- ture display, either degrees Fahrenheit or degrees Celsius, for five seconds. Then, the actual tempera- ture is displayed.

To change the temperature display:

1.Press both the Alarm button 5and the DOWN Refrigerator Temperature button 8for seven seconds. The set temperature display will blink six times.

2.While the temperature display is blinking, press both buttons again and the temperature display will change.

3.After making the change, the new temperature display will blink six times. Then both tempera- ture displays will show the actual temperature value.

Setting the Temperature - Figure 2

The appliance is pre-set for normal operation. We recommend temperatures of 39°F (4°C) in the refri- gerator and 0°F (-18°C) in the freezer.

To reduce the temperature:

Press the DOWN button on the left to redu- ce the refrigerator temperature 8and the DOWN button on the right to reduce the freezer temperature 2.

To increase the temperature:

Press the UP button on the left to increase the refrigerator temperature 8and on the right to increase the freezer temperature 2.

1.While you are entering the temperature, the set temperature will flash on the display.

2.When you press the temperature setting buttons for the first time, the most recent setting (known as the “reference setting”) is displayed.

3.You can change the settings in increments of 1°F (1°C) by briefly pressing the buttons again. If the buttons are held down the temperature set- ting will change faster.

4.Approximately five seconds after the button has been released, the display will automatically show the actual freezing or cooling temperature (known as the “actual setting”).

5.You can change the temperatures:

•In the refrigerator – between 36°F and 44°F (2°C and 7°C) and

•In the freezer – between -15°F and 6°F (-26°C and -14°C).

Figure 2

7080 361-03, C16, CS16, CI16 specifications

Liebherr, a name synonymous with high-quality engineering and innovation in the machinery and construction industry, has made waves with its latest models, the CI16 and CS16. These compact excavators are designed to deliver superior performance and efficiency in various applications, making them a popular choice among contractors and operators alike.

The Liebherr CI16 and CS16 are equipped with powerful diesel engines that provide ample horsepower while ensuring low fuel consumption and emissions. The machines are built with an emphasis on energy efficiency, adhering to the latest environmental regulations without compromising on performance. The engines support advanced technologies such as common rail fuel injection and turbocharging, which enhance power output and efficiency.

One of the standout features of the CI16 and CS16 models is their compact design, allowing operators to maneuver easily in confined spaces. This is particularly beneficial in urban environments or restricted job sites where larger machinery may struggle. Despite their smaller size, these excavators boast impressive digging and lifting capacities, making them capable of handling a wide range of tasks, from excavation to landscaping and trenching.

The ergonomic cab design of both models ensures that operators enjoy a comfortable working environment. The spacious cabin is equipped with adjustable seating, climate control, and advanced visibility, providing a clear line of sight to the work area. The intuitive controls enable precise operation, reducing operator fatigue and enhancing productivity throughout the workday.

Both CI16 and CS16 feature advanced hydraulic systems that provide quick response times and smooth operation. The option to customize hydraulic flow allows operators to tailor the machine's performance based on the attachments being used, maximizing versatility. Various attachments are compatible, including buckets, hammers, and grapples, further extending the utility of these machines.

Safety is paramount in the design of the Liebherr CI16 and CS16. Each excavator is equipped with features such as a reinforced cab structure, emergency stop buttons, and advanced monitoring systems. These ensure both operator safety and the protection of job site personnel.

Overall, the Liebherr CI16 and CS16 models represent a blend of power, efficiency, and precision. Their advanced technologies and user-focused design make them ideal for modern construction and landscaping challenges, solidifying Liebherr's commitment to innovation in the machinery industry. Whether for major construction projects or smaller jobs, these excavators offer the reliability and performance that Liebherr is known for.