Liebherr 7085446-01 manual Putting into operation, Control

Page 5

 

 

 

 

Putting into operation

4 Putting into operation

5.2.1 Muting the door alarm*

4.1 Switching on the appliance

 

The audible alarm can be muted when the door is open. The

 

sound switch-off function is active as long as the door is left

open.

u Open the door.

u Press alarm button Fig. 2 (7).

u Press the On/Off button Fig. 2 (1).

w The door alarm is silenced.

w The temperature display lights up. The interior

5.3 Temperature alarm*

 

light goes on when the door is opened. The appli-

 

ance is switched on.

w If “DEMO” is displayed, demo mode is activated.

 

The audible alarm sounds if the freezer temperature

 

Please contact the after sales service.

 

is not cold enough.

5 Control

 

The temperature display and the alarm symbol

 

Fig. 2 (8) flash at the same time.

 

 

 

 

5.1 Child proofing

The cause of the temperature being too high may be:

-

warm fresh food was placed inside

The child-proofing function enables you to make

-

too much warm ambient air flowed in when rearranging and

sure that the appliance is not inadvertently switched

-

removing food

off by playing children.

power failure for some time

5.1.1 Setting the child lock

-

the appliance is faulty

 

The audible alarm is automatically silenced, the alarm symbol

To switch on the function:

Fig. 2 (8) goes out and the temperature display stops flashing

u Activate setting mode: press the SuperFrost button Fig. 2 (5)

when the temperature is sufficiently cold again.

 

for approx. 5 seconds.

If the alarm status persists: (see Malfunction).

w The Menu symbol Fig. 2 (11) is shown on the display.

 

 

 

 

w c flashes on the display.

 

Note

 

u Briefly confirm with the SuperFrost button, Fig. 2 (5).

Food may be spoilt if the temperature is not cold enough.

w c1 appears in the display.

u Check the quality of the food. Do not consume spoiled food.

u Briefly confirm with the SuperFrost button, Fig. 2 (5).

 

 

 

 

5.3.1 Muting the temperature alarm*

w The child lock symbol Fig. 2 (12), lights up on the

w

display.

The audible alarm can be muted. When the temperature is

c flashes on the display.

 

sufficiently cold again, the alarm function is active again.

w The child lock function is switched on.

u Press alarm button Fig. 2 (7).

w The audible alarm is silenced.

 

If setting mode is to be terminated:

u Briefly press the On/Off button Fig. 2 (1).

5.4 Refrigerator compartment

-or-

u Wait for 5 minutes.

The natural circulation of air in the refrigerator compartment

w The temperature display shows the temperature again.

 

results in zones differing in temperature. It is coldest directly

To switch off the function:

above the vegetable drawers and at the rear wall. It is warmest

u Activate setting mode: press the SuperFrost button Fig. 2 (5)

at the top front of the compartment and in the door.

 

for approx. 5 seconds.

 

5.4.1 Food refrigeration

w The Menu symbol Fig. 2 (11) is shown on the display.

 

w c flashes on the display.

 

 

 

 

 

Note*

u Briefly confirm with the SuperFrost button, Fig. 2 (5).

 

 

The energy consumption increases and the cooling perform-

w c0 appears in the display.

 

ance decreases if the ventilation is inadequate.

u Briefly confirm with the SuperFrost button, Fig. 2 (5).

u Always keep the air slits of the fan free.

w The child lock symbol Fig. 2 (12) goes out.

 

 

 

 

u Store perishable food such as ready-to-serve dishes, meat

w c flashes on the display.

w The child lock function is switched off.

 

 

products and sausages in the coldest zone. Place butter

 

If setting mode is to be terminated:

 

 

and preserves in the upper area and in the door (see Appli-

u Briefly press the On/Off button Fig. 2 (1).

 

 

ance at a glance).

-or-

u Use recyclable plastic, metal, aluminium and glass

u Wait for 5 minutes.

 

 

containers and cling film for wrapping.

w The temperature display shows the temperature again.

 

u Always store liquids and food which is subject to odour or

 

 

taste transfer in closed containers or cover them.

5.2 Door alarm*

 

u Foods which give off a large amount of ethylene gas and

 

 

always be stored separately or wrapped so as not to reduce

 

 

 

 

delicate foods, such as fruit, vegetables, salad, should

For refrigerator and freezer compartment

 

 

the storage life; e.g. do not store tomatoes together with

If the door is open for longer than 60 seconds, the

 

 

kiwis or cabbage.

audible warning will sound.

 

u Use the front area of the refrigerator compartment floor only

The audible alarm is automatically silenced when

 

 

for briefly putting down cooled products, e.g. when rear-

the door is closed.

 

 

ranging and sorting. However do not leave cooled products

 

 

 

 

there otherwise they may be pushed back or tipped over

 

 

 

 

when the door is closed.

u Do not store food too close together to enable good air circulation.

* Depending on model and options

5

Image 5
Contents Operating instructions Appliance at a glance Contents Appliance at a glanceGeneral safety information General safety informationClimate For ambient temperatures Rating ConformityControls and displays Temperature displayControls and displays Operating and control elementsControl Putting into operationControl Freezer compartment Maintenance MaintenanceCleaning the appliance Defrosting with NoFrostMalfunction Customer serviceMalfunction Taking the appliance out of service Switching off the applianceDecommissioning DecommissioningDisposing of the appliance

7085446-01 specifications

The Liebherr 7085446-01 is a remarkable component primarily designed for use within Liebherr's advanced machinery and equipment. As a part of Liebherr’s commitment to innovation and quality, this product exemplifies the company’s dedication to engineering excellence.

One of the key features of the Liebherr 7085446-01 is its robust design, tailored to withstand the rigors of heavy-duty applications. Crafted from high-quality materials, it ensures durability and longevity, making it suitable for a wide range of operating conditions. The product is engineered to meet strict industry standards, which speaks volumes about its reliability in critical applications.

Incorporating state-of-the-art technologies, the Liebherr 7085446-01 is designed for optimal performance. The integration of advanced sensor technology allows for real-time monitoring, providing vital data to machinery operators. This not only enhances operational efficiency but also aids in predictive maintenance, ultimately reducing downtime and operational costs.

Another significant characteristic of the Liebherr 7085446-01 is its enhanced efficiency. With a focus on energy conservation, this component is engineered to minimize power consumption while maximizing output. This feature is increasingly important in today's eco-conscious landscape, where businesses are pressured to reduce their carbon footprint.

Furthermore, the Liebherr 7085446-01 boasts exceptional versatility, making it compatible with various Liebherr machines. This adaptability allows operators to seamlessly integrate the component into their existing systems without major overhauls, thus saving time and resources during equipment upgrades.

In terms of safety, the Liebherr 7085446-01 is built with numerous protective features. These include fail-safe mechanisms that ensure the equipment functions reliably under various conditions, safeguarding both machinery and personnel. The manufacturer’s commitment to safety is evident in its thorough testing processes, which aim to eliminate potential risks associated with operation.

In conclusion, the Liebherr 7085446-01 stands out as a high-performance component characterized by its robust construction, advanced technologies, enhanced efficiency, versatility, and unwavering safety standards. As industries continue to evolve, components like the Liebherr 7085446-01 will play a pivotal role in enhancing operational capabilities and driving innovation forward.