Liebherr 7085446-01 manual Control

Page 6

Control

5.4.2 Setting the temperature

The temperature depends on the following factors:

-the frequency of opening the door

-the room temperature of the installation location

-the type, temperature and quantity of the food

Recommended temperature setting: 5 °C

An average temperature of approx. -18 °C is then established in the freezer compartment.

The temperature can be adjusted continually. Once the 1 °C setting is reached, the sequence starts again at 9 °C .

u Call up temperature function: press the setting button Fig. 2 (4).

w The previously-set value will flash in the temper- ature display.

u Change the temperature in 1 °C steps: Press the setting button Fig. 2 (4) until the required temperature is indicated in the temperature display.

u Change temperature continually: hold down setting button.

w During adjustment the value flashes on the display.

w The new setting is adopted approx. 5 seconds after the last time the button was pressed and the set temperature displayed again. The temperature in the interior gradually adjusts to the new value.

Dismantling shelves

u The shelves can be disman- tled for cleaning.

5.4.5 Using the sectioned shelf

Fig. 3

uThe glass shelf with stop face (2) has to be at the back.

uThe glass plate (1) with pull-out stops must be at the front so that the stops (3) face downwards.

5.4.6 Door racks

Moving the storage rack

5.4.3 Fan*

With the fan you can rapidly cool large quantities of fresh food or achieve a relatively even distribution of temperature across all the storage levels.

The forced-air cooling is to be recommended:

-at high room temperature (above33 °C )

-at high humidity

The forced-air cooling uses slightly more energy. To save energy, the fan switches off automatically when the door is open.

Switching on the fan*

uBriefly press the fan button Fig. 2 (9). w The fan symbol Fig. 2 (10) shines.

w The fan is active. It switches on automatically when the compressor runs.

To switch off the fan*

uBriefly press the fan button Fig. 2 (9). w The fan symbol Fig. 2 (10) goes out. w The fan is switched off.

5.4.4 Shelves

Relocating the shelves

The shelves have stops preventing them from being uninten- tionally pulled out.

u Lift the shelf and draw it out forwards.

u Insert shelf with the raised edge pointing upwards at the back.

w The food does not freeze onto the rear wall.

Fig. 4

Dismantling door racks

Fig. 5

uThe door racks can be dismantled for cleaning.

5.4.7 Using the bottle holder

u To avoid the bottles tipping over, push the bottle holder along.

6

* Depending on model and options

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operating instructions Contents Appliance at a glance Appliance at a glanceClimate For ambient temperatures Rating General safety informationGeneral safety information ConformityControls and displays Temperature displayControls and displays Operating and control elementsPutting into operation ControlControl Freezer compartment Cleaning the appliance MaintenanceMaintenance Defrosting with NoFrostCustomer service MalfunctionMalfunction Decommissioning Switching off the applianceTaking the appliance out of service DecommissioningDisposing of the appliance

7085446-01 specifications

The Liebherr 7085446-01 is a remarkable component primarily designed for use within Liebherr's advanced machinery and equipment. As a part of Liebherr’s commitment to innovation and quality, this product exemplifies the company’s dedication to engineering excellence.

One of the key features of the Liebherr 7085446-01 is its robust design, tailored to withstand the rigors of heavy-duty applications. Crafted from high-quality materials, it ensures durability and longevity, making it suitable for a wide range of operating conditions. The product is engineered to meet strict industry standards, which speaks volumes about its reliability in critical applications.

Incorporating state-of-the-art technologies, the Liebherr 7085446-01 is designed for optimal performance. The integration of advanced sensor technology allows for real-time monitoring, providing vital data to machinery operators. This not only enhances operational efficiency but also aids in predictive maintenance, ultimately reducing downtime and operational costs.

Another significant characteristic of the Liebherr 7085446-01 is its enhanced efficiency. With a focus on energy conservation, this component is engineered to minimize power consumption while maximizing output. This feature is increasingly important in today's eco-conscious landscape, where businesses are pressured to reduce their carbon footprint.

Furthermore, the Liebherr 7085446-01 boasts exceptional versatility, making it compatible with various Liebherr machines. This adaptability allows operators to seamlessly integrate the component into their existing systems without major overhauls, thus saving time and resources during equipment upgrades.

In terms of safety, the Liebherr 7085446-01 is built with numerous protective features. These include fail-safe mechanisms that ensure the equipment functions reliably under various conditions, safeguarding both machinery and personnel. The manufacturer’s commitment to safety is evident in its thorough testing processes, which aim to eliminate potential risks associated with operation.

In conclusion, the Liebherr 7085446-01 stands out as a high-performance component characterized by its robust construction, advanced technologies, enhanced efficiency, versatility, and unwavering safety standards. As industries continue to evolve, components like the Liebherr 7085446-01 will play a pivotal role in enhancing operational capabilities and driving innovation forward.
Top Page Image Contents