Liebherr 180613 7085462-00 manual Putting into operation, Control

Page 5

Putting into operation

-the freezer temperature is above 0 °C.

The following displays indicate malfunction. Possible causes and corrective action (see Malfunction).

-F0 to F9

-FE*

-The power failure symbol shines.

4 Putting into operation

4.1 Switching on the appliance

Note

u To switch on the entire appliance it is necessary only to switch on the freezer compartment.

Switch on the appliance approx. 2 hours before adding frozen food for the first time.

Do not load food to be frozen before the tempera- ture display reads -18 °C.

4.1.1 Switching on the freezer compartment

uPress On/Off button, freezer compartment Fig. 2 (8).

The temperature display of the refrigerator compartment indicates the current temperature inside.

The temperature display of the freezer compartment and the alarm symbol flash until the temperature is sufficiently low. If the temperature is above 0 °C, dashes flash. If it is below,

the current temperature flashes.ww

4.1.2Switching on refrigerator and BioFresh compartment

If the refrigerator compartment was switched off (e.g. during an extended absence like holidays), it can be switched back on separately.

u Press On/Off button, refrigerator compartment Fig. 2 (1). w The interior light is on when the door is opened.

w The temperature display shines. Refrigerator and BioFresh compartment are switched on.

5 Control

5.1 Child proofing

The child-proofing function enables you to make sure that the appliance is not inadvertently switched off by playing children.

5.1.1 Setting the child lock function

u To activate the setting mode: press SuperFrost button Fig. 2 (12) for about 5 s.

w c flashes on the display.

w The menu symbol Fig. 2 (16) shines.

u Briefly press the SuperFrost button Fig. 2 (12).to confirm. When c1 is indicated in the display:

u Tto activate the child lock, briefly press the SuperFrost button Fig. 2 (12).

wThe child lock symbol Fig. 2 (17) shines. c flashes in the display.

When c0 is indicated in the display:

u to deactivate the child lock, briefly press the SuperFrost button Fig. 2 (12).

wThe child lock symbol Fig. 2 (17) goes out. c flashes in the

display.

u To deactivate the set-up mode: press On/Off button, freezer compartment Fig. 2 (8).

-or-

u Wait for 5 minutes.

w The temperature is indicated again in the temperature display.

5.2 Door alarm

For refrigerator/BioFresh compartment and freezer compart- ment

If the door is open for longer than 60 seconds, the audible warning will sound.

The audible alarm is automatically silenced when the door is closed.

5.2.1 Muting the door alarm

The audible alarm can be muted when the door is open. The sound switch-off function is active as long as the door is left open.

u Press alarm button Fig. 2 (14). w The door alarm is silenced.

5.3 Temperature alarm

The audible alarm sounds if the freezer temperature is not cold enough.

The temperature display and the alarm symbol Fig. 2 (15) flash at the same time.

The cause of the temperature being too high may be:

-warm fresh food was placed inside

-too much warm ambient air flowed in when rearranging and removing food

-power failure for some time

-the appliance is faulty

The audible alarm is automatically silenced, the alarm symbol Fig. 2 (15) goes out and the temperature display stops flashing when the temperature is sufficiently cold again.

If the alarm status persists: (see Malfunction).

Note

Food may be spoilt if the temperature is not cold enough.

u Check the quality of the food. Do not consume spoiled food.

5.3.1 Muting the temperature alarm

The audible alarm can be muted. When the temperature is sufficiently cold again, the alarm function is active again.

u Press alarm button Fig. 2 (14). w The audible alarm is silenced.

5.4 Refrigerator compartment

The natural circulation of air in the refrigerator compartment results in zones differing in temperature. It is coldest directly above the plate separating off the BioFresh zone and at the rear wall. It is warmest at the top front of the compartment and in the door.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Operating instructions Appliance at a glance ContentsAppliance at a glance General safety information General safety informationClimate For ambient temperatures Rating ConformityControls and displays Temperature displayControls and displays Operating and control elementsControl Putting into operationPutting into operation Control Using the bottle holder Using adjustable bottle shelfVarioSafe Door racksBioFresh compartment Freezer compartment VarioSpace DrawersInformation system Cold storage accumulatorsMaintenance MaintenanceDefrosting with NoFrost Manual defrostingCleaning the IceMaker Cleaning the applianceCustomer service After cleaningMalfunction MalfunctionTaking the appliance out of service Switching off the applianceDecommissioning Decommissioning

180613 7085462-00 specifications

The Liebherr 180613 7085462-00 is an advanced product from Liebherr, known for its innovative engineering and high-quality construction solutions. This model embodies the company's commitment to excellence and efficiency in various industrial applications.

One of the primary features of the Liebherr 180613 7085462-00 is its robust design, which ensures longevity and durability in tough operating environments. The use of high-quality materials not only enhances the lifespan of the product but also contributes to its reliable performance under extreme conditions.

This model incorporates advanced technologies aimed at optimizing productivity. The Liebherr 180613 7085462-00 is equipped with an intuitive control system that allows for easy operation, making it accessible for a wide range of users. Additionally, its ergonomic design ensures that operators can work comfortably and efficiently, reducing fatigue and increasing overall productivity.

Another notable characteristic is the energy efficiency of the Liebherr 180613 7085462-00. The engineering team at Liebherr has integrated cutting-edge energy-saving technologies, which not only lower operational costs but also minimize the environmental impact. This is particularly important in today’s market, where sustainability is becoming increasingly critical.

The Liebherr 180613 7085462-00 also features advanced safety measures. With a focus on protecting both the operator and the machinery, the model incorporates several safety features that adhere to stringent industry standards. This ensures users can operate the machine with confidence, knowing their safety is a top priority.

In terms of versatility, the Liebherr 180613 7085462-00 can be used across various applications, from construction to logistics. Its adaptable design and extensive compatibility with other Liebherr components make it an ideal choice for businesses looking to streamline their operations.

Overall, the Liebherr 180613 7085462-00 is a testament to Liebherr’s engineering prowess. With its combination of robust design, advanced technologies, energy efficiency, and safety features, it stands out in the market as a reliable and versatile solution for a variety of industrial needs. Companies investing in this model can expect not only immediate operational benefits but also long-term value and efficiency.
Top Page Image Contents