RCA DH91RF Connections, Connecting to your video source, Video and Mono Audio Connection

Connections

Follow these steps to connect your RF Modulator.

1. Connecting to your video source

How you connect the RF Modulator to your video source (DVD player, video game system, etc.) depends on the outputs your video source has. Look at the back panel of your video source to see which of the following best matches the connections it offers. Then, follow the directions for that connection.

S-Video and Stereo Audio Connection

Video and Mono Audio Connection

		1. Plug the connectors on
			one end of a stereo
			audio	cable	into	the
			audio	input	jacks	on
			the RF Modulator.
	2.		Plug	the connectors
			on the cable’s other
Video			end into the audio out-
Source
			put jacks on the video
			source, using the color
			coding on the connec-
			tors as a guide.
		3. Plug the connector on
			one end of an S-Video

Video Source

A/V Cable

1.Plug the connectors on one end of an A/V cable into the video and audio input jacks on the RF Modulator (using either the AUDIO R or L jack).

2.Plug the cable’s other ends into the video and audio jacks on the video source.

RF Modulator	cable into the S-Video
	input jack on the RF
	Modulator.

4.Plug the connector on the cable’s other end into the S-Video output jack on the video source.

Video and Stereo Audio Connection

RF Modulator

Video Source

A/V Cable

1.Plug the connectors on one end of a stereo A/V cable into the video and audio input jacks on the RF Modulator.

2.Plug the connectors on the cable’s other end into to video and audio output jacks on the video source, using the color coding on the connectors as a guide.

RF Modulator