BEVERAGE
For 4 to 6 oz. cups:
1.Touch BEVERAGE once.
2.Enter number of cups by touching number pads from 1 to 4.
3.Touch START/STOP.
For the larger 7 to 9 oz. cups:
1.Touch BEVERAGE twice.
2.Enter number of mugs by touching number pads from 1 to 4.
3.Touch START/STOP.
3.Touch START/STOP pad.
Microwaving one large (8-10 oz.) frozen dinner:
1.Touch FROZEN DINNER twice.
2.For 1 entree or 2 entrees, touch the number pad “1” or “2”:
3.Touch START/STOP.
REHEAT
1.Touch REHEAT pad.
2.Touch START/STOP.
FROZEN DINNER
For one or two small (5-7 oz.) frozen dinners:
1.Touch FROZEN DINNER once.
2.For 1 entree or 2 entrees, touch the number pad “1” or “2”
CLEANING AND CARE
1.Turn off the oven and remove the power plug from the wall socket before cleaning.
2.Keep the inside of the oven clean. When food splatters or spilled liquids adhere to oven walls, wipe with a damp cloth. Mild detergent may be used if the oven gets very dirty. Avoid the use of spray and other harsh cleaners as they may stain, streak or dull the door surface.
3.The outside surfaces should be cleaned with a damp cloth. To prevent damage to the operating parts inside the oven, water should not be allowed to seep into the ventilation openings.
4.Wipe the window on both sides with a damp cloth to remove any spills or spatters.
5.Do not allow the control panel to become wet. Clean with a soft, damp cloth. When
cleaning the control panel, leave oven door open to prevent oven from accidentally turning on.
6.If steam accumulates inside or around the outside of the oven door, wipe with a soft cloth. This may occur when the microwave oven is operated under high humidity conditions. In such case, it is normal.
7.It is occasionally necessary to remove the glass tray for cleaning. Wash the tray in warm sudsy water or in a dishwasher.
8.The roller ring and oven floor should be cleaned regularly to avoid excessive noise. Simply wipe the bottom surface of the oven with mild detergent. The roller ring may be washed in mild sudsy water or dishwasher. When removing the roller ring from cavity floor for cleaning, be sure to replace in the proper position.
11