Peavey 115P manual Important Safety Instructions, Sound Level dBA, Slow Response

Page 3

IMPORTANT SAFETY INSTRUCTIONS

WARNING: When using electrical products, basic cautions should always be followed, including the following:

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any of the ventilation openings. Install in accordance with manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding plug. The wide blade or third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point they exit from the apparatus.

11.Note for UK only: If the colors of the wires in the mains lead of this unit do not correspond with the terminals in your plug‚ proceed as follows:

a)The wire that is colored green and yellow must be connected to the terminal that is marked by the letter E‚ the earth symbol‚ colored green or colored green and yellow.

b)The wire that is colored blue must be connected to the terminal that is marked with the letter N or the color black.

c)The wire that is colored brown must be connected to the terminal that is marked with the letter L or the color red.

12.Only use attachments/accessories provided by the manufacturer.

13.Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a

cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

14.Unplug this apparatus during lightning storms or when unused for long periods of time.

15.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

16.Never break off the ground pin. Write for our free booklet “Shock Hazard and Grounding.” Connect only to a power supply of the type marked on the unit adjacent to the power supply cord.

17.If this product is to be mounted in an equipment rack, rear support should be provided.

18.Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in suscep- tibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a sufficient time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the following permissible noise level exposures:

Duration Per Day In Hours

Sound Level dBA, Slow Response

8

90

6

92

4

95

3

97

2

100

1 1⁄2

102

1

105

1⁄2

110

1⁄4 or less

115

According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss. Ear plugs or protectors to the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent hearing loss, if exposure is in excess of the limits as set forth above. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation.

SAVE THESE INSTRUCTIONS!

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Impulse 115P Powered Subwoofer · Operations Manual Page Sound Level dBA, Slow Response Important Safety InstructionsDescription FeaturesFuse IEC Power Cord ConnectionGround Lift Switches Power SwitchPower LED Speaker Level Powered OutputsUsing the Pole Stand Base AC PowerGetting a Signal to the Impulse 115P Left & Right Outputs Volume Control AdjustmentAdjusting the kosmos Processing Level High-Pass OutputsTroubleshooting Male Vocals Sound Muddy or Boomy Hum or BuzzRattling or Buzzing Excessive High-Frequency Output from the SubwooferTouchup Care & MaintenanceCleaning Sunlight/HeatHookup Diagrams Live Application Non-powered Mixer Add-on Use DJ Application Channel Stereo Operation Page 115P Block Diagram Frequency Response Curves THD & IM Netzbetriebener Subwoofer MerkmaleBeschreibung A R P a N E L Eingänge Power-SchalterPower-LED IEC-NetzkabelanschlussVorsichtsmaßnahmen Page Page Left/Right Outputs Fehlersuche Page Page Frequency Response Curves Spezifikationen Descripción CaracterísticasConexión del cable de corriente IEC FusibleNivel Maestro del Sistema Interruptor de CorrienteLED de Corriente EntradasUsando la Base de Atril PrecaucionesSalidas Izquierda y Derecha Ajuste DE Control DE VolumenAjuste del Nivel de Proceso del kosmos Salidas de AgudosAplicaciones Impulse 115P Sistema Estéreo de 3 CanalesImpulse 115Ps con 2 Parlantes de Rango Completo Múltiples Impulse 115P u otros productos amplificadosSonido Distorsionado o Sucio RuidosVibraciones Externas La Voz Masculina Suena Muy Grave y LodosaRetoques Cuidado Y MantenimientoCalor/Luz del sol LimpiezaFrequency Response Curves Especificaciones Caractéristiques Interrupteur d’Alimentation Connecteur d’Alimentation IECEntrées Envoyer un Signal à votre Impulse 115P Utiliser l’Adaptateur de PoleAlimentation électrique Sorties Droite & Gauche Contrôle de VolumeAjustez les contrôles du kosmos Sorties Hautes-Fréquences High-PassUtilisation de Multiple Impulse 115P Pas de Signal en SortieImpulse 115P Système Stéréo 3-Enceintes Impulse 115Ps avec 2 Enceintes SatellitesVoix d’Hommes avec Trop de Dynamique dans les Graves MaintenanceSaturation/Craquement de Haut-parleur Sorties Excessives de Hautes Fréquences du Caisson SubExposition au soleil/Chaleur NettoyageAccastillage de fixation Frequency Response Curves Impulse 115P Product Category Peavey Electronics Corporation Limited Warranty80304936

115P specifications

The Peavey 115P is a robust and versatile powered speaker designed to meet the demands of various live sound and monitoring applications. Renowned for its compatibility with a range of audio systems, the 115P is an essential tool for musicians, DJs, and audio professionals looking for reliable performance and clarity.

At the heart of the Peavey 115P is its 15-inch woofer, which delivers powerful bass response and rich mids, making it suitable for everything from music performances to public speaking engagements. This woofer is complemented by a high-frequency compression driver that ensures crisp, articulate highs, blending seamlessly with the low-end sound to provide a well-rounded audio experience.

One of the standout features of the Peavey 115P is its integrated power amplifier, which boasts a substantial output. This amplifier eliminates the need for external power sources, making setup quicker and easier. Additionally, the speaker's onboard controls include a master volume knob and EQ settings, giving users fine control over their sound.

The 115P employs Peavey’s patented Circuitry, including Volume and Equalization controls that enhance overall sound quality. The speaker also incorporates a discrete Class D amplifier section, known for its efficiency and lightweight design, ensuring that the 115P not only sounds excellent but is also easy to transport.

Connectivity is another strong suit of the Peavey 115P. It features balanced XLR inputs, making it easy to connect to a variety of devices, including mixers and microphones. The speaker also includes a loop-through output for daisy-chaining additional speakers, allowing for expanded coverage in larger venues.

Constructed with durability in mind, the Peavey 115P is housed in a rugged enclosure that stands up to the rigors of touring and frequent transport. Its design includes integrated handles for easy lifting and maneuvering, and its lightweight profile adds to its portability.

In summary, the Peavey 115P is a powerful, flexible speaker system that excels in delivering high-quality audio performance for a variety of applications. With its impressive features, reliable technology, and durable construction, it is an excellent choice for both professional and amateur sound engineers looking for outstanding sound reinforcement. Whether you are performing at a small venue or using it for a large event, the Peavey 115P is engineered to meet your sound needs effectively.
Top Page Image Contents