Linear RA-2400, DVS-2400, DVS-1200, DUAL-824, DVS-2408 manual Sensor Options, Sensor Status

Page 27

4.9SENSORS (CONTINUED)

PERIMETER: Sensor will instantly trigger the burglary siren and report the burglary code to the Central Station in Home or Away Mode. Sensor will sound chime in Chime Mode.

ENTRY/EXIT: Sensor uses the exit/entry delay and can trigger the burglary siren and report the burglary code to the Central Station in Home or Away mode. Sensor will sound chime in Chime Mode.

INTERIOR: Sensor is only active in the Away Mode. It will instantly trigger the burglary siren and report the burglary code to the Central Station if triggered before an entry/exit sensor. Causes a delayed alarm if activated during the entry delay.

CHIME: Sensor will sound chime in all modes.

ARM/DISARM + HOME AUTO: The left button on a 2-button sensor will arm/disarm the Console.The right button on a 2-button sensor activates the home-automation output. Pressing both buttons triggers the emergency siren.

ARM & DISARM: The left button on a 2-button sensor will arm the Console. The right button on a 2-button sensor will disarm the Console. Pressing both buttons triggers the emergency siren.

ENVIRONMENTAL: Sensor is always armed in all modes. Causes a local annunciation when triggered.

KEYPAD: Reserved for wireless keypads used with the Console.

INTERIOR HOME: Sensor allows interior zones to trigger an alarm. This will generally be used with PIRs that are not in normal nighttime mode.

SENSOR OPTIONS

✦View or edit the SENSOR OPTIONS. These options are automatically set when the sensor is programmed into the Console. The sensor options are:

AUTO RESTORE: This box should be checked for auto restoring sensors that only send alarm transmissions. The Console will automatically restore the “open” sensor.

SUPERVISED: This box should be checked for all sensors that send periodic status reports. DXT sensors do not send periodic status reports. REMOVE THE CHECK FROM THIS BOX IF A MODEL DXT SENSOR HAS BEEN PROGRAMMED INTO THIS SENSOR LOCATION or if you don’t want supervision for that sensor. This will keep the Console TROUBLE indicator from lighting due to missing status reports from that sensor.

☞NOTE: The sensor can still report a low battery condition this will cause the Console’s BATTERIES indicator to flash.

HARDWIRED OPTIONS: For Model DVS-2408 only. Selects which hardwired loop (1-8) is assigned to the sensor number selected. For non-hardwired sensors, this selection should be set to WIRELESS.

SENSOR STATUS

✦View the SENSOR STATUS to see the condition of the sensor selected. The sensor status conditions are:

BYPASSED: The Console was armed with this sensor open. It is currently bypassed and cannot cause an alarm.

LOW BATTERY: The sensor has sent a low battery signal to the Console. Replace the sensor’s battery.

TROUBLE: The Console has not received a status report from this sensor in 8 hours. Sensor may have been out of range of the Console’s receiver, or the sensor may be non-functional.

☞NOTE: After any changes are made to the sensor type or sensor options, test the sensor to verify proper operation. Testing the “repaired” transmitter will reset the TROUBLE indicator.

25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents RA-2400 Table of Contents Software Description What is the RA-2400 Remote Access Software?Minimum System Requirements System RequirementsProgramming Outline Setup RA-2400 SoftwareTo Install the Remote Access Program Program InstallationTo Test the Modem Testing the ModemOverview NEW Window Starting the ProgramFile Menu BARView Account Profile Window Overview Menu TreeEdit Area Communications Setup Speaker COM PortConnection Options Modem Initialization String Creating a Custom Account Profile NEW Customer Customer InformationConsole Access Codes ARM/DISARM Console ARM/DISARMENTRY/EXIT Console ENTRY/EXITAlarms Console AlarmsHome AUTOMATION-OUTPUT Console HOME-AUTOMATION OutputAudio Console AudioSensor Type SensorsSensor Status Sensor OptionsCommunicator Main Communicator MainPhone Numbers Communicator Routing and NumbersAccount Numbers Trouble Report RoutingEnabled Reports Communicator Enabled ReportsBy 2 Format Communicator 4 by 2 FormatZone Codes 13.1 4 by 2 POINT-TO-POINT Alarm Codes13.2 4 by 2 POINT-TO-POINT Trouble Codes 13.3 4 by 2 POINT-TO-POINT Arming Closing Codes Access Codes Close13.4 4 by 2 POINT-TO-POINT Disarming Opening Codes Access Codes OpenConsole Alarm Codes 13.5 4 by 2 Console Alarm CodesBy 2 General Alarm Codes 13.6 4 by 2 General Alarm CodesAdemco CONTACT-ID Report Codes Sending and Receiving Console Data Accessing the SEND/RECEIVE Window Choose AN Account Choosing AN Account ProfileBefore Connecting Connecting to a ConsoleConnecting Remotely Connecting LocallySending Sending DataReceiving Receiving DataArming Mode Changing the CONSOLE’S ModeDisconnecting Disconnecting from the ConsoleClosing RA-2400
Related manuals
Manual 44 pages 42.75 Kb

DVS-2408, DUAL-824, RA-2400, DVS-2400, DVS-1200 specifications

The Linear DVS-1200, DVS-2400, RA-2400, DUAL-824, and DVS-2408 are advanced digital video surveillance systems designed for a variety of security applications. These models offer state-of-the-art features, technologies, and characteristics that enhance security monitoring and recording capabilities.

The DVS-1200 is a compact and efficient digital video recorder that supports up to 12 channels of video input. It features high-resolution recording capabilities, providing clear and detailed images. With real-time playback and advanced motion detection, the DVS-1200 allows users to monitor activities effectively. Its user-friendly interface simplifies configuration and operation, making it accessible for both novice and experienced users.

Upgraded for larger installations, the DVS-2400 supports up to 24 channels. This model is equipped with H.264 video compression technology, significantly reducing storage requirements while maintaining high-quality images. The DVS-2400 also offers remote access capabilities, enabling users to view live footage or playback recorded events from anywhere using a smartphone or computer. Its built-in analytics features allow for motion detection, line crossing alerts, and more, enhancing overall security.

The RA-2400 is a remarkable model designed for robust performance in demanding environments. This recorder not only supports 24 channels but also integrates advanced RAID technology for data redundancy and enhanced storage reliability. The RA-2400 is ideal for applications where data loss is unacceptable, making it suitable for critical infrastructure and high-security locations.

The DUAL-824 model stands out with its unique dual-stream encoding feature. It allows simultaneous recording and streaming of two video resolutions, providing flexibility for different applications such as local monitoring and remote access. This model supports up to 8 channels and is equipped with advanced event triggers, ensuring significant activities do not go unnoticed.

Finally, the DVS-2408 is a versatile and high-performance system designed for larger facilities. With support for 24 channels and the ability to integrate with various IP cameras, the DVS-2408 delivers exceptional scalability. This model comes with comprehensive software for monitoring and management, allowing for multiple users and custom user permissions.

Together, these Linear video surveillance models represent a robust and reliable solution for modern security needs, featuring the latest technologies and high-quality performance to ensure safety and peace of mind in various environments.
Top Page Image Contents