Levelling, Fitting a stability bracket

Repeat from the front and remove the front half of the poly base. Pull the drawer out to its furthest point. Lift it up and out.

Make sure you lower BOTH REAR ROLLERS. There are two adjusting nuts, one for each roller, at both the front bottom corners of the cooker.

Unfold the rear edge of pack base tray. Carefully push the cooker backwards off the pack base and into position. Take care not to damage the power cable. Push the cooker close to its final position, leaving just enough space to get behind it.

Fit the levelling tool on the rectangular adjuster as shown below.

LOWER THE FRONT ROLLER by doing 14 complete (360°) turns clockwise. (This means turning and removing the levelling tool 56 times).

Now LOWER THE TWO REAR ROLLERS.

First fit the levelling tool on the hexagonal adjusting nut as shown below.

Make 10 complete (360°) turns clockwise. (This means turning and removing the levelling tool 20 times).

Levelling

You are recommended to use a spirit level on a shelf in one of the ovens to check for level.

Place the cooker in its intended position taking care not to twist it within the gap between the kitchen units as damage may occur to the cooker or the units.

The rollers can be adjusted to level the cooker. To adjust the height of the rear of the cooker use the levelling tool supplied to turn the adjusting nuts at the front bottom corners of the cooker.

Adjust the height of the front roller to level the cooker. Turn clockwise to raise the cooker and anticlockwise to lower.

When you are satisfied with the height and level raise the front of the cooker by one turn of the front roller adjuster. Screw down the front feet to meet the floor. Screw the front roller adjuster anticlockwise to raise the front roller so that the front of the cooker is supported on the feet, not the front roller, to prevent accidental movement of the cooker.

Leave the levelling tool on the adjuster with the handle of the tool facing the rear of the cooker, so that the customer can use it if they wish to move the cooker.

Replace the drawer by locating on side runners and push in.

Fitting a stability bracket

A stability bracket or chain (not supplied by with the cooker) should be fitted when the cooker is connected to a flexible gas supply.

When fitting a stability bracket read these instructions together with the leaflet supplied with the bracket.

1.Place the cooker in its intended position and level the cooker.

2.Draw a pencil line 100mm from the front edge of the levelling feet.

3.Mark the centre line for the bracket by measuring 550mm from the left hand side of the cooker.

110 specifications

The Rangemaster 110 is a remarkable piece of culinary equipment that stands out for its blend of classic design, modern technology, and exceptional performance. Designed for the serious home cook and culinary enthusiast, this range cooker offers a host of features that cater to both functionality and aesthetics.

One of the main characteristics of the Rangemaster 110 is its impressive size. Measuring 110cm wide, it provides ample cooking space, making it an ideal choice for larger kitchens and those who often cook for family and friends. The range features multiple ovens, allowing for versatile cooking modes. Typically, you will find a conventional oven, a fan oven for even heat distribution, and even a separate grill, providing users with the ultimate flexibility in meal preparation.

In terms of cooking technologies, the Rangemaster 110 is equipped with innovative features such as the multifunction oven. This technology enables various cooking methods, including baking, roasting, and grilling, ensuring that every dish comes out perfectly. The dual fuel option is another highlight, offering the efficiency of gas hobs combined with the consistent heat of electric ovens, giving home cooks the best of both worlds.

The design of the Rangemaster 110 is equally impressive. Available in a variety of colors, from traditional cream and black to more contemporary shades, it can seamlessly integrate into any kitchen decor. The elegant finish and classic styling give the cooker a timeless appeal, making it a centerpiece in any cooking space.

Additional features include heavy-duty cast-iron pan supports that provide excellent stability for cookware, and the ergonomic controls that allow for precise adjustments while cooking. A built-in timer and temperature gauge enhance convenience, ensuring that dishes are cooked to perfection every time.

Cleaning is made easier with self-cleaning functions in the ovens, reducing the time and effort needed to maintain the appliance. The Rangemaster 110's commitment to energy efficiency also stands out, as it typically boasts good energy ratings, making it an environmentally friendly choice.

In summary, the Rangemaster 110 is a sophisticated range cooker that combines traditional craftsmanship with modern innovations. Its combination of size, diverse cooking functions, and stylish aesthetics make it an excellent addition to any kitchen, catering to the needs of passionate cooks who demand both performance and elegance.