3D Innovations 3.0.1 appendix Page, page B-9

Appendix B Site-to-Site VPN User Interface Reference

Create VPN Wizard

		Field Reference
Table B-5	Create VPN wizard > Device Selection Page
Element			Description
Available Devices			Lists all devices that can be included in your selected VPN
			topology, that support the IPSec technology type, and which you are
			authorized to view.
			Note Clicking a device group selects all its devices.
Hubs			The devices you selected to be hubs in your hub-and-spoke
			topology. In an Easy VPN topology, the selected devices are
			servers.
			Note If multiple devices are selected, you must make sure that the
			required primary hub device appears first in the list. You can
			use the Up and Down buttons to change the order of the
			Hubs in the list.
			To remove devices from the list, select them and click <<.
Spokes			The devices you selected to be spokes in your hub-and-spoke
			topology. In an Easy VPN topology, the selected devices are clients.
			To remove devices from the list, select them and click <<.
Peer One/Peer Two			The devices you selected to be peers in your point-to-point
			topology.
			To remove the selected device from the Peer One/Peer Two field,
			click <<.
Selected Devices			The devices you selected to be included in your full mesh topology.
			To remove selected devices from the Selected Devices list, click <<.
Back button			Returns to the previous wizard page. See Name and Technology
			Page, page B-9.
Next button			Advances to the next wizard page. See Endpoints Page, page B-13.
Cancel button			Closes the wizard without saving your changes.
Help			Opens help for this page.

	User Guide for Cisco Security Manager 3.0.1
B-12	OL-8214-02