3D Innovations 3.0.1 appendix Dial Backup Settings Dialog Box

Page 32

Appendix B Site-to-Site VPN User Interface Reference

Create VPN Wizard

Table B-11

Edit Endpoints Dialog Box > VRF Aware IPSec Tab (continued)

 

 

 

Element

 

Description

 

 

 

Process Number

 

Available only if the 2-Box radio button is selected, and if the

 

 

selected routing protocol is OSPF.

 

 

The routing process ID number that will be used to identify the

 

 

secured IGP.

 

 

The range is 1-65535.

 

 

 

OSPF Area ID

 

Available only if the 2-Box radio button is selected, and if the

 

 

selected routing protocol is OSPF.

 

 

The ID number of the area in which the packet belongs. You can

 

 

enter any number from 0-4294967295.

 

 

Note All OSPF packets are associated with a single area, so all

 

 

devices must have the same area ID number.

 

 

Next Hop IP Address

Available only when a 2-Box solution is selected with static routing.

 

 

Specify the IP address of the interface that is connected to the IPSec

 

 

Aggregator.

 

 

Redistribute Static Route

Available only when a 2-Box solution is selected with any routing

 

 

protocol other than Static route.

 

 

When selected, enables static routes to be advertised in the routing

 

 

protocol configured on the IPSec Aggregator towards the PE device.

 

 

 

OK button

 

Saves your changes locally on the client and closes the dialog box.

 

 

Note When you select the new or edited hub-and-spoke topology

 

 

in the Site-to-Site VPN Manager window, an indication of

 

 

VRF-Aware IPSec configuration appears in the VPN

 

 

Summary page. See VPN Summary Page, page B-3.

 

 

 

Cancel button

 

Closes the dialog box without saving your changes.

 

 

 

Help button

 

Opens help for this tab.

 

 

 

Dial Backup Settings Dialog Box

Use the Dial Backup Settings dialog box to define optional settings for configuring a dial backup policy for your site-to-site VPN. These settings are available for IPSec, GRE, GRE Dynamic IP, or DMVPN technologies.

 

User Guide for Cisco Security Manager 3.0.1

B-32

OL-8214-02

Image 32
Contents Site-to-Site VPN User Interface Reference Understanding VPN Topologies, Working with VPN Topologies,B-37 VPN SummaryB-3 and Peers Page, page B-7 Configuring High Availability in Your VPN Topology, Configuring VRF-Aware IPSec Settings,Configuring an IKE Proposal, Configuring IPSec Proposals,Understanding IPSec Technologies and Policies, Topology. See IKE Proposal Page, page B-37See IPSec Proposal Page, page B-39 B-53IPSec Tab, page B-28 See GRE Modes Page, page B-59High Availability Page, page B-34 Peers Managing VPN Devices in Device View,Create VPN Wizard Topology. See Device Selection Page, page B-10Name and Technology Device Selection Editing a VPN Topology,Defining a Name and IPSec Technology, B-10Navigation Path Page, page B-9 Endpoints See VPN Interface Tab, page B-17 B-34 Tab, page B-24See Edit Endpoints Dialog Box, page B-16 Edit Endpoints Dialog Box VPN Interface Tab Procedure for Configuring a Vpnsm or VPN SPA Blade, Information, see Interface Roles Page, page C-126IP Address for IPSec Termination -To enter manually the IP More information, see Interface Roles Page, page C-126More information, see Configuring Dialer Interfaces on Cisco IOS Routers,Defining VPN Services Module Vpnsm or VPN SPA Settings Box, page B-32VPN SPA Blade, For more information, see Adding VPN SPA Slot Locations Protected Networks Tab IP Address for IPSec Termination-To enter manually the IPTable B-9 Edit Endpoints Dialog Box Protected Networks Tab More information, see Editing Access Control List Objects Fwsm TabMore information, see Editing Interface Role Objects, Information, see Editing Network/Host Objects,Table B-10 Edit Endpoints Dialog Box Fwsm Tab VRF Aware IPSec Tab For more information, see Interface Roles Page, page C-126Table B-11 Edit Endpoints Dialog Box VRF Aware IPSec Tab Solution, IPSec Two-Box Solution,C-126 RoutersDial Backup Settings Dialog Box Summary page. See VPN Summary Page, page B-3Table B-12 Dial Backup Settings Dialog Box High Availability Table B-13 Create VPN wizard High Availability Policy configured. See VPN Summary Page, page B-3 For more information, see Enabling Stateful Failover,Site to Site VPN Policies IKE ProposalMore information, see IKE Proposal Dialog Box, page C-123 Site-to-Site VPN Policies in Policy View,Understanding Preshared Key Policies, C-123 IPSec ProposalIKE, Shared Site-to-Site VPN Policies in Policy View, For more information, see About Crypto Maps,IPSec Transform Sets Page, page C-130 For more information, see About Transform Sets,To Use, Element Description VPN Global Settings ISAKMP/IPSec Settings TabConfiguring VPN Global Settings, For more information, see About IKE Keepalive,See Understanding IKE, Appendix B Site-to-Site VPN User Interface Reference NAT Settings Tab VPN Global Settings Page, page B-44 Understanding NAT,For more information, see About NAT Traversal, NAT,General Settings Tab For more information, see Understanding Fragmentation Select the required setting for the DF bit Preshared Key Table B-19 Preshared Key Element Description Negotiation Method Public Key Infrastructure Attributes, Working with PKI Enrollment Objects,C-140 FlexConfig see Working with FlexConfigs, GRE ModesTable B-21 GRE Modes Page GRE or GRE Dynamic IP Policy GRE?, OL-8214-02 Configuring Cisco IOS Router Interfaces, OL-8214-02 Configuration of GRE, For more information, see Prerequisites for SuccessfulElement Description Preshared Key Policies, For more information, see Configuring Cisco IOS Router Interfaces,Easy VPN IPSec Proposal Understanding Easy VPN, For more information, see Understanding NAT, More information, see Working with AAA Server Group Objects Device Access Policies,Group Objects, For more information, see Editing User Group Objects, User Group PolicyWorking with User Group Objects, Tunnel Group Policy PIX 7.0/ASA Tunnel Group Policy General Tab For more information, see Working with ASA User Groups Client Address Assignment Tunnel Group Policy IPSec Tab Network/Host Objects,For more information, see Supported AAA Server Types Tunnel Group Policy Advanced Tab More information, see Working with Interface Role Objects Tunnel Group Policy Client VPN Software Update Tab Tunnel Group Policy PIX 7.0/ASAClient Connection Characteristics Table B-29 Easy VPN Remote Client Connection Characteristics About Locking in Site-to-Site VPN Topologies, Working with Site-to-Site VPN Policies,For more information, see Deleting a VPN Topology, See Site to Site VPN Policies, page B-37For more information, see About Editing a VPN Topology OL-8214-02 OL-8214-02