Hoover PL74, PL73 manual Instructions for the Installer, Installation, Built in Hobs, Gb Ie

Page 2

Tab. 1

 

BUILT IN HOBS

 

 

 

 

 

 

Burners/hotplates

 

 

5 a gas

4 a gas

 

 

 

 

 

 

1 electr.

 

 

Type / reference

 

 

PL 73/PL 74

PL 73/PL 74

 

 

Flame failure device

 

 

- / si

- / si

 

 

Little burner

AUS ø 50 mm

1

1

 

 

Double ring burner

QC ø 135 mm

 

 

 

 

Ultra rapid burner

UR ø 110 mm

1

 

 

 

Semirapid burner

SR ø 75 mm

 

1

1

 

 

Rapid burner

R ø 100 mm

 

 

 

 

 

Griddle 174x160 mm

 

 

 

 

 

 

Griddle 229x379

 

 

 

 

 

 

Electric plate

ø80

PE

 

 

 

 

Electric plate

ø145

PE

 

 

 

 

Electric plate

160x265 mm PE

 

 

 

 

Installed gas Type/Power:

 

 

 

 

 

 

G20 20mbar*

(METHANE)

 

11,25 kW

7,75 kW

 

 

G30 28-30mbar

(GPL)

 

818 g/h

636 g/h

 

 

Installation class

 

 

 

 

 

 

Voltage/Frequency

V/Hz

 

220-240/50

220-240/50

 

 

Electrical imput power

 

 

 

 

 

 

Electronic ignition

 

 

si

si

 

 

 

 

 

 

 

 

 

Product dimension WXD (mm)

 

 

 

 

 

* Manufacturer setting

IE cat. II2H3 +

 

GB cat. II2H3 +

 

 

INSTRUCTIONS FOR THE INSTALLER

INSTALLATION

The Purchaser is responsible for the installation of the hob. The Manufacturer does not accept any responsibility for any damage or loss resulting from incorrect installation, and as such this will not covered by the Manufacturer’s Guarantee.

The hob may be installed in any worktop which is heat resistant to a temperature of 100°C, and has a thickness of 25 - 45 mm. The dimensions of the insert to be cut out of the worktop are in shown in Fig. 1.

If the Hob is fitted next to a cabinet on either side, the distance between the Hob and the cabinet must be at least 15 cm (see Fig. 2); while the distance between the hob and the rear wall must be at least 5,5 cm.

The distance between the hob and any

 

 

other unit or appliance above it (e.g. An ex-

 

 

tractor hood) must be no less than 70 cm

 

 

(fig.2).

 

 

When there is an accessible space between

 

 

the built-in hob and the cavity below, a divi-

 

 

ding wall made of insulating material should

 

 

be inserted (wood or a similar material) (fig.

 

 

3).

 

 

Important - The diagram below shows

 

 

how the sealant should be applied.

Plan 60

Plan 75

 

The Hob unit is fitted by attaching the Fixing

Clamps supplied, using the holes at the base of the unit.

Fig. 1

accessible space

This appliance has been designed for non-professional, i.e. domestic, use.

Fig. 3

Fig. 2

GB IE

11

12

GB IE

Image 2
Contents Piani Cottura Built in Hobs Instructions for the InstallerInstallation GB IEGAS Connection for U.K. only For U.K. only Instructions for the InstallerElectrical Connection for U.K. only Suitable locationGB IE Electrical ConnectionGAS Connection IE GBUSE of HOB Using the GAS BurnerGeneral Advice Regulating the Minimum FlameAftercare Maintenance and CleaningCover It is important the Burners are replaced correctlyWeee

PL73, PL74 specifications

The Hoover PL74 and PL73 are advanced vacuum cleaner models that exemplify Hoover's commitment to blending power, efficiency, and user-friendly design. These models are tailored for those seeking a reliable cleaning solution without compromising on performance or convenience.

One of the standout features of the Hoover PL74 and PL73 is their impressive suction power, enabled by Hoover’s innovative motor technology. This technology not only ensures deep cleaning across various surfaces, including carpets and hard floors, but also enhances the longevity and durability of the vacuum. The models employ a cyclonic filtration system which separates dirt from air, preventing clogging and maintaining suction strength over time.

Another key characteristic of the PL74 and PL73 is their lightweight design. Weighing significantly less than many comparable models, these vacuums provide unparalleled maneuverability. Users can easily carry them up and down stairs or around the home without experiencing fatigue. This is complemented by a user-friendly handle and a flexible hose that enhances reach, allowing for easy cleaning of hard-to-reach areas like under furniture and along edges.

The Hoover PL74 and PL73 also incorporate advanced filtration systems that capture allergens and fine dust particles, making them an excellent choice for allergy sufferers. The HEPA filters used in these models ensure that air expelled back into the environment is cleaner than the air taken in, promoting a healthier home atmosphere.

For added convenience, both models come equipped with a range of attachments, including a crevice tool, dusting brush, and upholstery nozzle. These attachments are beneficial for tailored cleaning tasks, from detailed cleaning of furniture and delicate surfaces to targeted suction in narrow spaces.

Ease of use is further enhanced by features such as a large dust bin that minimizes the frequency of emptying, LED indicators that signal when the dust bin is full, and an easy-to-use power control system that allows users to adjust suction power as needed.

In summary, the Hoover PL74 and PL73 vacuum cleaners combine powerful suction, lightweight design, and advanced filtration technologies to deliver outstanding cleaning performance. These features make them not only effective cleaning tools but also convenient and practical choices for modern homes. Whether tackling pet hair, allergens, or everyday dirt, these Hoover models stand out as reliable solutions for maintaining a clean and healthy living environment.