EN
Turntable Installation
Hub (underside)
Enamel tray
Turntable shaft
a.Never place the enamel tray upside down. The enamal tray should never be restricted.
b.The enamal tray must always be used during cooking.
c.All food and containers of food are always placed
on the enamel tray for cooking.
d.Ifenamel tray cracks or breaks, contact your nearest authorized service center.
Important information about installing
7KLVDSSOLDQFHLV127LQWHQGHGIRUXVHLQDFRPPHUFLDO
environment.
3OHDVHREVHUYHWKHLQVWDOODWLRQLQVWUXFWLRQVSURYLGHGDQG note that this appliance should only be installed by a qualied technician. 7KHDSSOLDQFHLVWWHGZLWKDSOXJDQGPXVWRQO\EH
connected to a properlyinstalled earthed socket. ,QFDVHDQHZVRFNHWLVQHHGHGLQVWDOODWLRQDQGFDEOH connection must only be done by a quali° ed electrician. If the plug is no longer accessible following installation, a pole disconnecting device must be present on the installation site with a contact gap of at least 3 mm.
$GDSWHUVPXOWLZD\VWULSVDQGH[WHQVLRQFRUGVPXVWQRWEH
used. Overloading can result in fire.
The accessible surfacemay be hot duringoperation.
Placement
•Danger! Do not disassemble this appliance. Touching internal components of this appliance can cause serious personal injury or death.
•Place the microwave oven on a firm,flat surface.
•Make sure that there is surficient ventilation around the microwave oven. At the rear and sides keep at least 10 cm free.
•Do not cover the air vents.
•The adjustable feet should not be removed.
•Do not place the microwave oven near a heat source.
•Transmitting and receiving equipment such as radios and televisions can affect the
operation of the micr owave oven. | 11 |