JBL TiK Sub owner manual Introduction, Unpacking, Placement, Connection

Page 2

JBL TiK Sub Owner’s Manual

ENGLISH

INTRODUCTION

Thank you for choosing the JBL TiK Sub designed to produce extended, powerful deep bass in any high performance music or home cinema system. While created as an integral part of the acclaimed JBL TiK loudspeaker range, the TiK Sub is also fully compatible with any make or model of high quality main/satellite loudspeakers for state of the art stereo and surround audio.

To ensure correct installation and optimum performance, please take the time to thoroughly read and follow the instructions in this owner’s manual.

UNPACKING

The packing materials are designed to protect the subwoofer from damage during shipment. We advise you to keep the packing materials for future use.

PLACEMENT

Always start with the subwoofer as close to one of the front corners as possible. It is also recommended that the subwoofer be positioned along the same wall as the front loudspeakers. Corner placement provides substantial bass reinforcement. Placement away from corners, near a single wall offers some reinforcement, while placement away from walls offers minimal bass reinforcement.

If bass response is excessive, use the subwoofer’s Level control to reduce bass output. If excessive bass is limited to a few specific frequencies, it may be necessary to modify the acoustical coupling of the subwoofer to the room boundaries and/or to the room modes by moving the subwoofer to a location which provides more evenly balanced bass response.

CONNECTION

The TiK Sub can be connected to your audio system using either line level or speaker level connections. Do not use both at the same time. If available, use line level connection.

The TiK Sub also includes a special balanced XLR DSP In. This connection may be used (with the Input Select switch not pressed in) as a conventional balanced connection, if your receiver/amplifier has a balanced subwoofer output. With the Input Select switch pressed in, this socket may only be used to connect the subwoofer to a JBL TiK Master Sub.

Note: The push-button controls on the rear of the subwoofer are recessed into the rear panel to prevent accidentally activating an unwanted function. To push a button, use a small pointed object such as a pencil, screwdriver, etc.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Ti K SUB Unpacking PlacementIntroduction ConnectionReceiver/Amplifier Line LevelSpeaker Level Operation If there is low bass output, check the following TroubleshootingTechnical Specifications TiK SubSubwoofer Aufstellen EinleitungAuspacken Subwoofer VerkabelnCinch-Eingänge Line-Level Receiver/VerstärkerAnschließen an das Stromnetz Gerät in Betrieb NehmenHochpegelanschlüsse Speaker Level LautstärkeTiK Subwoofer FehlerbehebungTechnische Daten DeklarationserklärungBranchements EmplacementEmballage Récepteur/Amplificateurceiver/Amplifier Niveau ligne Line LevelNiveau haut-parleur Speaker Level Fréquence de coupure Filter Mode OpératoireVolume Level Techniques du TiK Sub Guide DE DépannageSi la sortie des basses est très faible, vérifiez DéDeclclarationdeofconformitConformityé CEHarman International Company

TiK Sub specifications

The JBL TiK Sub is a powerful subwoofer designed to deliver impressive bass performance, making it an ideal choice for audio enthusiasts and home theater systems alike. Its advanced technologies and robust features set it apart in the competitive market of audio equipment.

One of the standout features of the JBL TiK Sub is its innovative driver technology. The subwoofer is equipped with a high-performance cone driver that works in tandem with a powerful built-in amplifier. This combination allows for deep and controlled bass reproduction that can fill any room with rich, resonant tones.

The TiK Sub boasts a frequency response range that extends down to an astonishing 25Hz, which ensures that even the lowest notes are articulated with precision. This capability enhances the overall listening experience, whether you're enjoying music, watching movies, or playing video games. The deep bass response is complemented by minimized distortion, allowing the user to experience every nuance of audio without loss of clarity.

Another significant technology featured in the JBL TiK Sub is its adjustable phase control. This feature allows users to fine-tune the subwoofer's timing relative to other speakers in the setup, optimizing the audio output for any environment. Additionally, the subwoofer includes an automatic room calibration system that analyzes the acoustic characteristics of the room and adjusts the sub's settings accordingly. This ensures consistent performance regardless of placement and room dynamics.

The JBL TiK Sub also includes multiple input options, making it versatile for various audio setups. Whether connecting to a home theater receiver, a music system, or a computer, users will appreciate its flexibility. The design is sleek and contemporary, blending seamlessly with modern decor. It features a robust cabinet construction that not only minimizes unwanted vibrations but also enhances the overall durability of the device.

Moreover, the JBL TiK Sub is designed with user-friendly controls, making it easy to adjust volume levels, crossover frequencies, and phase settings for tailored performance. This combination of features and technologies makes the JBL TiK Sub an essential addition for anyone looking to elevate their audio experience with powerful and precise bass.

In conclusion, the JBL TiK Sub stands out as a top-tier subwoofer by offering exceptional sound quality, advanced tuning technologies, and flexible connectivity options, making it an excellent choice for audiophiles and casual listeners alike.
Top Page Image Contents