Hoover HEDS1064-80 manual

Page 12

Fused electrical supply is requi red-copper wire only. Time delay fuse or circuit breaker recommended and provide separate circuit serving only this appliance. Outlet should be placed in adjacent cabinet.

Make sure that the plug on the appliance remains accessible after installation.

After making sure that the voltage and the frequency values for the current i n the home correspond to those on the rating plate and that the electrical system is sized for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly. If the electrical socket to which the appl iance must be connected is not appropriate for the plug , replace the socket(installed by a qualified electrici an),rather than using a adaptors or the like as they coul d cause overheating and burns.

The appliance must be connected to the water mains using new hose-sets. The old hose-sets should not be reused.

Water pressure must be between 0,04 MPa and 1 MPa. If the pressure is below the minimum consult our Service Department for advice.

If faucet has not threads: attach the faucet adapter to faucet, then tighten every screw of the adapter. To prevent leaking your should tighten the adapter.

1Pull Unicouple and its hoses completely out from storage compartment located at rear of dishwasher

and attach it to the faucet adapter.

2

3

Attach the Unicouple connector to the faucet adapter by depressing the collar at the top of the connector.

When Unicouple is all the way up onto the adapter, release the collar. It will then snap Into position to

lock the Unicouple in place. The Unicouple' s small hose carries water from the faucet to the dishwasher. Its large hose carries drain water to the sink. Be sure Unicouple is pointing toward the sink bowl drain opening and the sink drain is open for water that will drain from your dishwasher. If your dishwasher drains into a disposer, operate the disposer until it is completely empty before starting the dishwasher.

Turn water fully on before starting the dishwasher.

A hose that attaches to a sink spray can burst if it is installed on the same water line as the dishwasher. If your sink has one, it is recommended thet the hose be disconnected and the hole plugged.

1

2

3

Turn off the water.

Release the water pressure by depressing the pressure release button. This relieves water pressure and protects you, and the room, from severe splashing.

Release Unicouple from faucet by depressing the collar at the top of the Unicouple connector.

1

2

Remove the power cord plug from the wall receptacle. Disconnect Unicouple from faucet adapter.

10

Image 12
Contents Heds Before calling for service ,13 „ Do not tamper with controls Silverware Basket Coarse Filt erPress the Start/Reset button to start the washing Lightly soiled pansStandard daily cycle For the cycle14-28 Auto nomyGram/cycle Page Cups Forks Knives Soup spoons Inlet pipe from the water valve Never run the dishwasher without the filters in placePage Page DIMENSIONSmm Power supply is not Fuse blown, orCircuit breaker acted Turned on Closed securelyDetergent Tea or coffee stains To remove the stains by handWill happen Iron deposits in water

HEDS1064-80 specifications

The Hoover HEDS1064-80 is a highly regarded upright vacuum cleaner known for its powerful performance and user-friendly design, making it an ideal choice for households of all sizes. This model stands out due to its innovative technologies and practical features, which significantly enhance the cleaning experience.

One of the core features of the HEDS1064-80 is its robust motor, which delivers strong suction power, ensuring effective removal of dirt and debris from various surfaces. With its multi-cyclonic technology, this vacuum maintains consistent suction by preventing the buildup of dirt in the filters, allowing for longer cleaning sessions without diminished performance. This feature is particularly beneficial for homes with pets, where hair and allergens can be more challenging to manage.

The HEDS1064-80 is designed for versatility, equipped with a range of attachments that cater to different cleaning needs. The included upholstery and crevice tools are perfect for reaching tight spaces or cleaning soft furnishings, while the turbo brush attachment effectively tackles pet hair on carpets and upholstery. This thoughtful array of tools makes the vacuum not just a floor cleaner, but a comprehensive cleaning solution for the whole home.

Another characteristic that enhances usability is its lightweight design. Weighing significantly less than many traditional vacuums, the HEDS1064-80 is easy to maneuver, making it suitable for quick clean-ups as well as thorough cleaning sessions. The vacuum also features a telescopic handle that adjusts comfortably to different user heights, promoting ergonomic use and reducing strain during cleaning.

The Hoover HEDS1064-80 also boasts a large-capacity dust container, which minimizes interruptions during cleaning. The easy-release container facilitates quick disposal of collected debris, preventing contact with allergens and dust that can cause irritation. Additionally, the vacuum includes HEPA filtration, which captures up to 99.97% of dust and allergens, ensuring cleaner air quality in the home.

In terms of design, the HEDS1064-80 features a sleek, modern aesthetic, available in attractive colors that easily blend into any home decor. Its compact size ensures easy storage, and it is equipped with a 5m power cord, providing substantial reach without the hassle of constantly plugging and unplugging.

Overall, the Hoover HEDS1064-80 is an impressive upright vacuum that combines powerful cleaning capabilities, innovative technologies, and user-friendly features, making it an excellent choice for anyone looking to maintain a clean and healthy living environment.