Indesit IDP 148 manual Installation, Positioning and levelling, Connecting the water inlet hose

Page 2

Installation

Keep this instruction manual in a safe place for future EN reference. If the appliance is sold, given away or moved,

please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it.

Please read this instruction manual carefully: it contains important information regarding the safe installation, use and maintenance of the appliance.

If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.

Positioning and levelling

1.Remove the appliance from all packaging and check that it has not been damaged during transportation.

If it has been damaged, contact the retailer and do not proceed any further with the installation process.

2.Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or even with the

wall. This appliance can also be recessed under a single worktop* (see the Assembly instruction sheet).

3.Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of the appliance may be adjusted until it reaches a horizontal position. If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operating.

4*. Adjust the height of the rear foot from the front of the appliance* on the central lower part of the dishwasher, turning a hexagonal spanner (red color) with an opening of 8 mm in a clockwise direction to increase the height or in an anticlockwise direction to decrease the height.

Connecting the water and electricity supplies

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses or the electricity supply cable.

The appliance must be connected to the water supply network using new hoses.

Do not use old hoses.

The water inlet (A) and outlet (B) hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation (see figure).

Connecting the water inlet hose

To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

To a suitable hot water connection point: your dishwasher may be supplied with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance).

The water pressure must be within the values indicated in the Technical data table (see adjacent information).

The hose should not be bent or compressed.

Anti-flooding protection

To ensure floods do not occur, the dishwasher:

-is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance.

Some models are also equipped with the supplementary safety device New Acqua Stop*, which guarantees anti- flooding protection even in the event of a supply hose rupture.

WARNING: HAZARDOUS VOLTAGE!

Under no circumstance should the water inlet hose be cut as it contains live electrical parts.

*Only available in selected models.

2

Image 2
Contents Contents Operating instructionsConnecting the water inlet hose InstallationConnecting the water and electricity supplies Positioning and levellingAnti-condensation strip Advice regarding the first wash cycleConnecting the water outlet hose Electrical Connection Control panel Description of the applianceOverall view Cutlery basket Loading the racksLower rack Upper rackMeasuring out the detergent Start-up and useStarting the dishwasher Half load Delayed startWash options Multi-functional tablets TabsWash cycle selection Wash cyclesDetergent Wash InstructionsRinse aid and refined salt Adjusting the amount of rinse aidSetting the water hardness Measuring out the rinse aidCare and maintenance Saving energy and respecting the environment Precautions and adviceGeneral safety DisposalTroubleshooting Malfunction Possible causes / SolutionsPage Page 195075755.00

IDP 148 specifications

The Indesit IDP 148 is a versatile built-in dishwasher that delivers an impressive combination of performance, efficiency, and user-friendly features, making it a popular choice for households seeking reliability in their kitchen appliances. With its sleek design, the IDP 148 blends seamlessly into modern kitchens, ensuring that functionality does not compromise aesthetics.

One of the standout features of the Indesit IDP 148 is its ample capacity. The appliance can accommodate up to 13 place settings, making it well-suited for both small and large families or even for entertaining guests. This spacious interior means fewer loads and more time spent enjoying your meals instead of cleaning up afterwards.

Efficiency is another hallmark of the IDP 148, as it boasts an A+ energy rating. This level of efficiency ensures that it consumes less energy while delivering optimal cleaning results, contributing to reduced utility bills and a smaller carbon footprint. The dishwasher also employs advanced water-saving technologies, allowing users to enjoy the convenience of a dishwasher without worrying about excessive water usage.

The IDP 148 is equipped with multiple wash programs tailored to various needs, including intensive cycles for heavily soiled pots and pans, eco modes for energy conservation, and quick wash functions for when time is of the essence. These flexible options allow users to select the perfect cycle for their dishwashing needs, ensuring sparkling clean results each time.

In terms of user convenience, the dishwasher features an adjustable top basket, providing added flexibility when loading larger items. The racking system is designed to accommodate different types and sizes of dishes, making the loading process both efficient and hassle-free. Additionally, the IDP 148 is designed with a noise level of just 49 dB, ensuring a quiet operation that fits seamlessly into any home environment.

The Indesit IDP 148 also includes a delay start option, allowing users to set the dishwasher to run at a more convenient time, which can be particularly beneficial for those on busy schedules.

In conclusion, the Indesit IDP 148 is a feature-rich, reliable appliance that meets the demands of modern households. With its combination of capacity, efficiency, flexibility, and user-friendly technologies, it stands out as a solid choice for those seeking a built-in dishwasher that performs well while fitting perfectly into their kitchen decor.