Indesit IDP 148 manual Advice regarding the first wash cycle, Connecting the water outlet hose

Page 3

Connecting the water outlet hose

Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 4 cm. Alternatively, rest it over a sink or tub; the free end of the hose should not remain immersed in water.

Anti-condensation strip*

After installing the dishwasher, open the door and stick the

EN

 

adhesive transparent strip under the wooden shelf in order to

 

protect it from any condensation which may form.

 

Advice regarding the first wash cycle

A

The special plastic elbow* makes it easier to find the best layout: fix the elbow to the wall securely in order to prevent the outlet hose from moving and spilling the dirty water.

The part of the hose marked with the letter A should be between 40 and 100 cm above the ground (see figure).

After the appliance has been installed, immediately before running the first wash cycle, completely fill the salt dispenser with water and add only then approximately 1 kg of salt (see chapter entitled Rinse aid and refined salt). The water may overflow: this is normal and is not a cause for concern. Select the water hardness value (see chapter entitled Rinse aid and refined salt). - After the salt has been poured into the machine, the LOW SALT indicator light* switches off.

If the salt container is not filled, the water softener and the heating element may be damaged as a result.

We advise against the use of hose extensions.

Electrical connection

Before inserting the plug into the electrical socket, make sure that:

•The socket is earthed and complies with current regulations.

•The socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door (see chapter entitled Description of the appliance).

•The power supply voltage falls within the values indicated on the data plate on the inside of the door.

•The socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see Assistance); do not use extension cables or multiple sockets.

Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, it must be replaced by the manufacturer or its Technical Assistance Service in order to prevent all potential hazards. (See Assistance)

The Company shall not be held responsible for any incidents that occur if these regulations are not observed.

Technical data

Dimensions

width 60 cm

height 85 cm

 

depth 60 cm

 

 

Capacity

14 standard place-settings

 

 

Water supply

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

pressure

7,25 – 145 psi

 

 

Power supply

See appliance data plate

voltage

 

 

 

Total absorbed

See appliance data plate

power

 

Fuse

See appliance data plate

 

 

 

This dishwasher conforms to

 

the following European

 

Community Directives:

 

-2006/95/CE dated 16/01/2007

 

(Low Voltage) and subsequent

 

modifications

 

-89/336/EEC dated 03/05/89

 

(Electromagnetic Compatibility)

 

and subsequent modifications

 

-97/17/EC (Labelling)

 

-2002/96/ CE Waste Electrical

 

and Electronic Equipment

 

(WEEE)

*Only available in selected models.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Operating instructions ContentsPositioning and levelling InstallationConnecting the water and electricity supplies Connecting the water inlet hoseAdvice regarding the first wash cycle Connecting the water outlet hoseAnti-condensation strip Electrical Connection Description of the appliance Overall viewControl panel Upper rack Loading the racksLower rack Cutlery basketStart-up and use Starting the dishwasherMeasuring out the detergent Multi-functional tablets Tabs Delayed startWash options Half loadInstructions Wash cyclesDetergent Wash Wash cycle selectionMeasuring out the rinse aid Adjusting the amount of rinse aidSetting the water hardness Rinse aid and refined saltCare and maintenance Disposal Precautions and adviceGeneral safety Saving energy and respecting the environmentMalfunction Possible causes / Solutions TroubleshootingPage Page 195075755.00

IDP 148 specifications

The Indesit IDP 148 is a versatile built-in dishwasher that delivers an impressive combination of performance, efficiency, and user-friendly features, making it a popular choice for households seeking reliability in their kitchen appliances. With its sleek design, the IDP 148 blends seamlessly into modern kitchens, ensuring that functionality does not compromise aesthetics.

One of the standout features of the Indesit IDP 148 is its ample capacity. The appliance can accommodate up to 13 place settings, making it well-suited for both small and large families or even for entertaining guests. This spacious interior means fewer loads and more time spent enjoying your meals instead of cleaning up afterwards.

Efficiency is another hallmark of the IDP 148, as it boasts an A+ energy rating. This level of efficiency ensures that it consumes less energy while delivering optimal cleaning results, contributing to reduced utility bills and a smaller carbon footprint. The dishwasher also employs advanced water-saving technologies, allowing users to enjoy the convenience of a dishwasher without worrying about excessive water usage.

The IDP 148 is equipped with multiple wash programs tailored to various needs, including intensive cycles for heavily soiled pots and pans, eco modes for energy conservation, and quick wash functions for when time is of the essence. These flexible options allow users to select the perfect cycle for their dishwashing needs, ensuring sparkling clean results each time.

In terms of user convenience, the dishwasher features an adjustable top basket, providing added flexibility when loading larger items. The racking system is designed to accommodate different types and sizes of dishes, making the loading process both efficient and hassle-free. Additionally, the IDP 148 is designed with a noise level of just 49 dB, ensuring a quiet operation that fits seamlessly into any home environment.

The Indesit IDP 148 also includes a delay start option, allowing users to set the dishwasher to run at a more convenient time, which can be particularly beneficial for those on busy schedules.

In conclusion, the Indesit IDP 148 is a feature-rich, reliable appliance that meets the demands of modern households. With its combination of capacity, efficiency, flexibility, and user-friendly technologies, it stands out as a solid choice for those seeking a built-in dishwasher that performs well while fitting perfectly into their kitchen decor.
Top Page Image Contents