Indesit IDTM manual Installation, Positioning and levelling, Connecting the water and electricity

Page 2

Installation

EN

￿ Keep this instruction manual in a safe place for

future reference. If the appliance is sold, given away

 

or moved, please ensure the manual is kept with the

 

 

machine, so that the new owner may benefit from the

 

advice contained within it.

 

￿ Please read this instruction manual carefully: it

 

contains important information regarding the safe

 

installation, use and maintenance of the appliance.

 

￿ If the appliance must be moved at any time, keep

 

it in an upright position; if absolutely necessary, it

 

may be tilted onto its back.

 

Positioning and levelling

 

1. Remove the appliance from all packaging and

 

check that it has not been damaged during

 

transportation.

 

If it has been damaged, contact the retailer and do

 

not proceed any further with the installation process.

 

2. Check the dishwasher by placing it so that its

 

sides or back panel are in contact with the adjacent

 

cabinets or even with the wall. This appliance can

 

also be recessed under a single worktop (see the

 

Assembly instruction sheet).

 

3. Position the dishwasher on a level and sturdy floor.

 

If the floor is uneven, the front feet of the appliance

 

may be adjusted until it reaches a horizontal position

 

(the angle of inclination must not exceed 2 degrees).

 

If the appliance is levelled correctly, it will be more

 

stable and much less likely to move or cause

 

vibrations and noise while it is operating.

 

Connecting the water and electricity

 

supplies

￿Connection to the water and electricity supplies should only be performed by a qualified technician.

￿The dishwasher should not stand on top of the water hoses or the electricity supply cable.

The water inlet (A) and outlet (B) hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation (see figure).

Connecting the water inlet hose

•To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

•To a suitable hot water connection point: your dishwasher may be provided with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

￿If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance).

￿The water pressure must be within the values indicated in the Technical data table (see below).

￿The hose should not be bent or compressed.

Anti-flooding protection

To ensure floods do not occur, the dishwasher:

-is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance.

-is provided with a Water Stop* safety device, in other words it has a water inlet hose that consists of a transparent hose on the outside and a red hose on the inside: both the hoses can withstand extremely high pressure. If the internal hose breaks, the external hose becomes a bright red colour and carries the water instead, thus avoiding any leakage.

￿It is very important to check the external hose regularly: if it is a bright red colour, it must be replaced by an authorised technician as soon as possible (see Assistance).

* Only available in selected models.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Instruction booklet Positioning and levelling InstallationConnecting the water and electricity SuppliesTechnical data Electrical connectionNeutral N Control panel Description of the applianceOverall view Cutlery basket Loading the racksLower rack Upper rackLoading the detergent Start-up and useStarting the dishwasher Washing optionsWash cycles Wash cycle tableLoading the refined salt Rinse aid and refined saltLoading the rinse aid Care and maintenance Disposal of old electrical appliances Precautions and adviceGeneral safety Saving energy and respecting the environmentMalfunction TroubleshootingPossible causes / Solutions

IDTM specifications

The Indesit IDTM is a modern dishwasher designed to cater to the needs of busy households, offering a combination of efficiency, convenience, and advanced technology. With a sleek design and user-friendly interface, the IDTM is not just an appliance; it’s a valuable addition to any kitchen.

One of the standout features of the Indesit IDTM is its energy efficiency. Rated with a high energy class, it helps reduce electricity consumption while providing top-notch cleaning performance. This ensures that households not only save on utility bills but also contribute to a more sustainable environment.

The IDTM incorporates multiple washing programs, allowing users to select the perfect cycle based on their specific needs. From quick washes for lightly soiled dishes to intensive cleaning programs for heavily soiled cookware, this dishwasher is versatile enough to handle a variety of washing demands. The eco-program is particularly noteworthy as it optimizes water and energy usage without compromising on performance.

Another significant characteristic of the Indesit IDTM is its adjustable racks and flexible loading options. Users can easily modify the interior layout to accommodate different types and sizes of dishes, ensuring maximum space utilization. This feature is especially beneficial for larger families or those who enjoy hosting gatherings, as it enhances the dishwasher's capacity.

Indesit has incorporated innovative technologies such as the 'Push&Go' feature, which simplifies the washing process. With just a push of a button, users can initiate a quick and efficient wash cycle, making it perfect for when time is of the essence.

Another impressive technology is the 'Active Dry' system, which ensures that dishes come out not only clean but dry, eliminating the need for towel drying. This feature enhances convenience and saves users valuable time.

Moreover, the IDTM is designed with a noise-reduction feature, ensuring quiet operation even during nighttime washes. This is particularly advantageous for households where kitchen noise can disrupt daily activities or sleep.

In summary, the Indesit IDTM offers a multitude of features designed to optimize dishwashing efficiency while being user-friendly and environmentally aware. Its combination of flexible loading, various washing programs, and advanced technologies makes it an ideal choice for contemporary kitchens. Whether you have a large family or just want a hassle-free washing solution, the Indesit IDTM stands out as a reliable and efficient dishwasher.
Top Page Image Contents