Technical data, Electrical connection

Connecting the water outlet hose

Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 4 cm. Alternatively, rest it over a sink or tub; the free end of the hose should not remain immersed in water.

AThe special plastic

elbow* makes it easier to

find the best layout: fix

the elbow to the wall

securely in order to

prevent the outlet hose

from moving and spilling

the dirty water.

The part of the hose marked with the letter A

should be between 40 and 100 cm above the ground (see figure).

We advise against the use of hose extensions.

Electrical connection

Before inserting the plug into the electrical socket, make sure that:

•the socket is earthed and complies with current regulations;

•the socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door (see Description of the appliance);

•the power supply voltage falls within the values indicated on the data plate on the inside of the door;

•the socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see Assistance); do not use extension cables or multiple sockets.

Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

The cable should be checked regularly and

replaced by authorised technicians only.

The Company shall not be held responsible for any incidents that occur if these regulations are not observed.

Advice regarding the first wash cycle

After the appliance has been installed, immediately before running the first wash cycle, completely fill the salt dispenser with water and add approximately 2 kg of salt (see Rinse aid and refined salt). The water may overflow: this is normal and is not a cause for concern. It is also normal that the LOW SALT* indicator light continues to flash for a few cycles after the salt has been loaded.

Technical data

				width 60 cm
	Dimensions			height 85 cm
				depth 60 cm

	Capacity			12 standard place-settings

	Water supply			30 KPa ÷ 1 MPa
	Water supply			(0,3 ÷ 10 bar)
	pressure			(0,3 ÷ 10 bar)
	pressure			4,3 psi-145 psi
				4,3 psi-145 psi

	Power supply			See appliance data plate
	voltage			See appliance data plate
	voltage

	Total			See appliance data plate
	absorbed			See appliance data plate
	power

	Fuse			See appliance data plate

				This dishwasher conforms to
				the following European
				Community Directives:
				-73/23/EEC dated 19/02/73
				(Low Voltage) and subsequent
				modifications
				-89/336/EEC dated 03/05/89
				(Electromagnetic Compatibility)
				and subsequent modifications)
				-97/17/EC (Labelling)
				- 2002/96/EC(WEEE)

* Only available in selected models.

IDTM specifications

The Indesit IDTM is a modern dishwasher designed to cater to the needs of busy households, offering a combination of efficiency, convenience, and advanced technology. With a sleek design and user-friendly interface, the IDTM is not just an appliance; it’s a valuable addition to any kitchen.

One of the standout features of the Indesit IDTM is its energy efficiency. Rated with a high energy class, it helps reduce electricity consumption while providing top-notch cleaning performance. This ensures that households not only save on utility bills but also contribute to a more sustainable environment.

The IDTM incorporates multiple washing programs, allowing users to select the perfect cycle based on their specific needs. From quick washes for lightly soiled dishes to intensive cleaning programs for heavily soiled cookware, this dishwasher is versatile enough to handle a variety of washing demands. The eco-program is particularly noteworthy as it optimizes water and energy usage without compromising on performance.

Another significant characteristic of the Indesit IDTM is its adjustable racks and flexible loading options. Users can easily modify the interior layout to accommodate different types and sizes of dishes, ensuring maximum space utilization. This feature is especially beneficial for larger families or those who enjoy hosting gatherings, as it enhances the dishwasher's capacity.

Indesit has incorporated innovative technologies such as the 'Push&Go' feature, which simplifies the washing process. With just a push of a button, users can initiate a quick and efficient wash cycle, making it perfect for when time is of the essence.

Another impressive technology is the 'Active Dry' system, which ensures that dishes come out not only clean but dry, eliminating the need for towel drying. This feature enhances convenience and saves users valuable time.

Moreover, the IDTM is designed with a noise-reduction feature, ensuring quiet operation even during nighttime washes. This is particularly advantageous for households where kitchen noise can disrupt daily activities or sleep.

In summary, the Indesit IDTM offers a multitude of features designed to optimize dishwashing efficiency while being user-friendly and environmentally aware. Its combination of flexible loading, various washing programs, and advanced technologies makes it an ideal choice for contemporary kitchens. Whether you have a large family or just want a hassle-free washing solution, the Indesit IDTM stands out as a reliable and efficient dishwasher.