Indesit DIF 1614 operating instructions Troubleshooting, Problem Possible causes / Solutions

Page 12

Troubleshooting

Whenever the appliance fails to work, check for a solution from the following list before calling for

EN Assistance.

Problem:

Possible causes / Solutions:

 

 

The dishwasher does not start or

• Switch off the appliance by pressing the ON/OFF button, switch it back on after

cannot be controlled

approximately one minute and reset the program.

 

• The appliance has not been plugged in properly.

 

• The dishwasher door has not been shut properly.

 

 

The door won’t close

• The lock was released. Strongly push the door until a “clacking” noise is heard.

 

 

No water drains out from the

• The dishwasher cycle has not yet finished.

dishwasher.

• The water inlet hose is bent (see Installation).

 

• The drain duct is blocked.

 

• The filter is clogged up with food residues.

 

 

The dishwasher makes excessive

• The dishes are rattling against each other or against the sprayer arms.

noise.

• An excessive amount of foam has been produced: the detergent has not been

 

measured out correctly or it is not suitable for use in dishwashers (see Start-up

 

and use).

 

 

The dishes and glasses are

• The level of the refined salt is low or the dosage setting is not suited to the

covered in a white film or

hardness of the water (see Rinse aid and salt).

limescale deposits.

• The lid on the salt dispenser is not closed properly.

 

• The rinse aid has been used up or the dosage is too low.

 

 

The dishes and glasses are

• The rinse aid dosage is too high.

streaked or have a bluish tinge.

 

 

 

The crockery has not been dried

• A wash cycle without a drying program has been selected.

properly.

• The rinse aid has been used up or the dosage is too low (see Rinse aid and

 

salt).

 

• The rinse aid dispenser setting is not suitable.

 

• The crockery is made from non-stick material or plastic.

 

 

The dishes are not clean.

• The racks are overloaded (see Loading the racks).

 

• The crockery has not been arranged well.

 

• The sprayer arms cannot move freely.

 

• The wash cycle is too gentle (see Wash cycles).

 

• An excessive amount of foam has been produced: the detergent has not been

 

measured out correctly or it is not suitable for use in dishwashers (see Start-up

 

and use).

 

• The lid on the rinse aid compartment has not been shut correctly.

 

• The filter is dirty or blocked (see Care and maintenance).

 

• The refined salt level is low (see Rinse aid and salt).

 

 

The dishwasher does not take any

• There is no water in the mains supply.

water in - Tap shut-off alarm

• The water inlet hose is bent (see Installation).

(several short beeps* are emitted)

• Turn on the tap and the appliance will start after a few minutes.

(the 2 (Normal) and 3 (Soak) WASH

• The appliance lock has been activated because no action was taken when the

CYCLES indicator lights flash).

beeps* sounded.

 

Switch off the appliance using the ON/OFF button, turn on the tap and switch

 

the appliance back on after 20 seconds by pressing the same button. Re-

 

program the appliance and restart the wash cycle.

 

 

Water inlet hose alarm / Water inlet

• Switch off the appliance by pressing the ON/OFF button. Shut off the water tap

filter blocked

to eliminate the risk of flooding and remove the plug from the electrical socket.

(the 1 ECO), the 2 (Normal) and the

Make sure the water inlet filter has not become blocked by impurities (see “Care

3 (Soak) WASH CYCLES indicator

and maintenance” chapter).

lights flash).

 

 

 

*Only available in selected models.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Contents Operating instructionsInstallation Connecting the water and electricity suppliesPositioning and levelling Advice regarding the first wash cycle Electrical connectionAnti-condensation strip Electrical Connection Description of the appliance Overall viewControl panel Loading the racks Lower rack and cutlery basketUpper rack Start-up and use Starting the dishwasherMeasuring out the detergent Adding extra crockeryWash cycles Dishwasher, reduce the amount of detergent used accordinglyAdjusting the amount of rinse aid Setting the water hardnessRinse aid and refined salt Measuring out the rinse aidCare and maintenance Precautions and advice General safetySaving energy and respecting Environment DisposalTroubleshooting Problem Possible causes / SolutionsMonths Parts and Labour Guarantee Year Parts GuaranteeExtended Guarantees Free Helpdesk ServiceIndesit Service Parts and AccessoriesAppliance Registration UK 08448 225 Republic of Ireland 0818 313Page 195096602.01

DIF 1614 specifications

The Indesit DIF 1614 is a highly efficient built-in dishwasher designed to provide exceptional cleaning performance while seamlessly blending into your kitchen decor. With a modern and sleek design, this dishwasher is not only functional but also adds a touch of elegance to your home.

One of the standout features of the Indesit DIF 1614 is its energy efficiency. It boasts an A+ energy rating, ensuring that you can save on your utility bills while reducing your environmental footprint. This dishwasher is designed to consume minimal water and electricity, making it an eco-friendly choice for households looking to minimize their impact on the planet.

The DIF 1614 can accommodate up to 13 place settings, making it perfect for families or those who love to entertain. Its versatile interior layout is designed with adjustable racks, allowing you to customize the space according to your needs. The upper basket can be easily adjusted in height, accommodating larger items in the bottom rack without any hassle.

Equipped with multiple washing programs, the Indesit DIF 1614 offers flexibility for different cleaning needs. Users can select from programs such as Intensive, Normal, Eco, and Quick Wash, allowing you to choose the optimal cycle for each load. The Quick Wash feature is particularly beneficial for busy lifestyles, as it can clean a full load in as little as 30 minutes.

This model also incorporates a variety of technologies to enhance its cleaning capabilities. The Active Dry technology ensures that dishes come out spotless and dry, even plastic items that are typically difficult to dry thoroughly. Furthermore, the built-in sensors adjust the water and energy usage based on the load size, ensuring efficiency for every wash.

Safety is a priority with the Indesit DIF 1614, featuring a child lock to prevent any accidental operation. Additionally, it has a delayed start option, allowing users to program the dishwasher to run at a more convenient time, taking advantage of lower energy rates during off-peak hours.

In conclusion, the Indesit DIF 1614 combines efficiency, versatility, and safety in a stylish package. Its innovative features and user-friendly design make it an excellent choice for modern kitchens, ensuring that your dishes are cleaned to perfection every time.
Top Page Image Contents