Care and maintenance

Shutting off the water and electricity
supplies
•	Turn off the water tap after every wash cycle to avoid
	leaks.
•	Always unplug the appliance when cleaning it and
	when performing maintenance work.
Cleaning the dishwasher
•	The external surfaces of the machine and the
	control panel may be cleaned using a non-abrasive
	cloth which has been dampened with water. Do not
	use solvents or abrasive products.
•	Any marks on the inside of the appliance may be
	removed using a cloth dampened with water and a
	little vinegar.
Preventing unpleasant odours
•	Always keep the door of the appliance ajar in order
	to avoid moisture from forming and being trapped
	inside the machine.
•	Clean the seals around the door and detergent
	dispensers regularly using a damp sponge. This will
	avoid food becoming trapped in the seals, which is
	the main cause behind the formation of unpleasant
	odours.

Clean the water inlet filter at the tap outlet regularly.

-Turn off the water tap.

-Unscrew the end of the water inlet hose, remove the filter and clean it carefully under running water.

-Replace the filter and screw the water hose back into position.

Cleaning the filters

The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. They should be cleaned if you wish to achieve the best results in every wash.

Clean the filters regularly.

The dishwasher should not be used without filters, or if the filter is loose.

•After several washes, check the filter assembly and if necessary clean it thoroughly under running water, using a non-metallic brush and following the instructions below:

1. Turn the cylindrical filter C in an anti-clockwise direction and pull it out (fig. 1).

2. Remove the cup filter B by exerting a slight pressure on the side flaps (fig. 2).

3. Slide out the stainless steel plate filter A (fig. 3).

4. Inspect the trap and remove any food residue. NEVER REMOVE the wash cycle pump (black detail) (fig. 4).

Cleaning the sprayer arms

Food residue may become encrusted onto the sprayer

arms and block the holes used to spray the water. It is

therefore recommended that the arms are checked

from time to time and cleaned with a small non-metallic

brush.

The two sprayer arms may both be removed.

To remove the upper sprayer

arm, rotate the locking ring in

an anti-clockwise direction.

The upper sprayer arm

should be replaced with the

holes facing upwards.

The lower sprayer arm can be

removed by pressing on the

side tabs and pulling it

upwards.

Cleaning the water inlet filter*

If the water hoses are new or have not been used for an extended period of time, let the water run to make sure it is clear and free of impurities before performing the necessary connections. If this precaution is not taken, the water inlet could become blocked and damage the dishwasher.

After cleaning the filters, replace the filter assembly and fix it in position correctly; this is essential for maintaining the efficient operation of the dishwasher.

Leaving the machine unused for extended periods

•Disconnect the appliance from the electricity supply and shut off the water tap.

•Leave the door of the appliance ajar.

•When you return, run a wash cycle when the dishwasher is empty.

* Only available in selected models.

IDF 125 specifications

The Indesit IDF 125 is an innovative and efficient dishwasher designed to meet the needs of modern households while ensuring a perfect balance between performance and energy efficiency. This model stands out with its array of features designed to simplify dishwashing tasks and deliver superior results.

One of the defining characteristics of the Indesit IDF 125 is its ample capacity. With a space for up to 13 place settings, this dishwasher is perfect for families or those who frequently entertain guests. The well-designed interior maximizes the available space, allowing users to load a variety of dishes, pots, and pans without hassle.

The IDF 125 is equipped with multiple wash programs, offering versatility to meet different cleaning needs. Whether it's light loads or heavily soiled dishes, users can select from options such as Eco, Rapid, and Intensive cycles. The Eco program is especially noteworthy, as it focuses on energy savings while still delivering excellent cleaning performance, making it an environmentally friendly choice.

In addition to its wash programs, the Indesit IDF 125 features a Delay Timer, allowing users to set the dishwasher to start at a more convenient time. This function is ideal for taking advantage of off-peak electricity rates, further enhancing energy efficiency. The appliance also offers a handy Half Load option, which enables users to run the dishwasher even when it is not full, saving both water and energy.

The dishwasher's design includes a high-quality stainless steel finish, giving it a modern and sleek appearance that fits well in any kitchen. The user-friendly control panel is intuitive, making it easy to navigate through the various settings and programs.

Another significant benefit of the Indesit IDF 125 is its excellent noise reduction capabilities. With a low noise level during operation, this dishwasher can be run at any time without disturbing the household.

Overall, the Indesit IDF 125 combines practicality, technology, and style, making it a smart choice for those seeking an efficient kitchen appliance that enhances their dishwashing experience. Its blend of features and energy-saving technologies not only improves functionality but also contributes to a sustainable lifestyle.