Indesit IDF 125 manual Troubleshooting, Problem Possible causes / Solutions

Page 12

Troubleshooting

Whenever the appliance fails to work, check for a solution from the following list before calling for EN Assistance.

Problem:

Possible causes / Solutions:

 

 

The dishwasher does not start or

• Switch off the appliance by pressing the ON/OFF button, switch it back on after

cannot be controlled

approximately one minute and reset the program.

 

• The appliance has not been plugged in properly.

 

• The dishwasher door has not been shut properly.

 

 

The door won’t close

• The lock was released. Strongly push the door until a “clacking” noise is heard.

 

 

No water drains out from the

• The dishwasher cycle has not yet finished.

dishwasher.

• The water inlet hose is bent (see Installation).

 

• The drain duct is blocked.

 

• The filter is clogged up with food residues.

 

 

The dishwasher makes excessive

• The dishes are rattling against each other or against the sprayer arms.

noise.

• An excessive amount of foam has been produced: the detergent has not been

 

measured out correctly or it is not suitable for use in dishwashers (see Start-up

 

and use).

 

 

The dishes and glasses are

• The level of the refined salt is low or the dosage setting is not suited to the

covered in a white film or

hardness of the water (see Rinse aid and salt).

limescale deposits.

• The lid on the salt dispenser is not closed properly.

 

• The rinse aid has been used up or the dosage is too low.

 

 

The dishes and glasses are

• The rinse aid dosage is too high.

streaked or have a bluish tinge.

 

 

 

The crockery has not been dried

• A wash cycle without a drying program has been selected.

properly.

• The rinse aid has been used up or the dosage is too low (see Rinse aid and

 

salt).

 

• The rinse aid dispenser setting is not suitable.

 

• The crockery is made from non-stick material or plastic.

 

 

The dishes are not clean.

• The racks are overloaded (see Loading the racks).

 

• The crockery has not been arranged well.

 

• The sprayer arms cannot move freely.

 

• The wash cycle is too gentle (see Wash cycles).

 

• An excessive amount of foam has been produced: the detergent has not been

 

measured out correctly or it is not suitable for use in dishwashers (see Start-up

 

and use).

 

• The lid on the rinse aid compartment has not been shut correctly.

 

• The filter is dirty or blocked (see Care and maintenance).

 

• The refined salt level is low (see Rinse aid and salt).

 

 

The dishwasher does not take any

• There is no water in the mains supply.

water in - Tap shut-off alarm

• The water inlet hose is bent (see Installation).

(several short beeps are emitted*)

• Turn on the tap and the appliance will start after a few minutes.

(the Drying and End indicator lights

• The appliance lock has been activated because no action was taken when the

beeps* sounded. Switch off the appliance using the ON/OFF button, turn on the

flash).

 

tap and switch the appliance back on after 20 seconds by pressing the same

 

button. Re-program the appliance and restart the wash cycle.

 

 

Water inlet hose alarm / Water inlet

• Switch off the appliance by pressing the ON/OFF button. Shut off the water tap

filter blocked

to eliminate the risk of flooding and remove the plug from the electrical socket.

(the Washing, Drying and End

Make sure the water inlet filter has not become blocked by impurities (see “Care

indicator lights flashes).

and maintenance” chapter).

 

 

*Only available in selected models.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Contents Operating instructionsInstallation Connecting the water and electricity suppliesConnecting the water inlet hose Connecting the water outlet hoseAdvice regarding the first wash cycle Anti-flooding protectionAnti-condensation strip Electrical Connection Live LDescription of the appliance Overall viewControl panel Loading the racks Lower rack and cutlery basketUpper rack Start-up and use Starting the dishwasherMeasuring out the detergent Adding extra crockeryWash cycles Dishwasher, reduce the amount of detergent used accordinglyAdjusting the amount of rinse aid Setting the water hardnessRinse aid and refined salt Measuring out the rinse aidCare and maintenance Precautions and advice General safetySaving energy and respecting Environment DisposalTroubleshooting Problem Possible causes / SolutionsMonths Parts and Labour Guarantee Year Parts GuaranteeExtended Guarantees Free Helpdesk ServiceIndesit Service Parts and AccessoriesAppliance Registration Page 195071957.02

IDF 125 specifications

The Indesit IDF 125 is an innovative and efficient dishwasher designed to meet the needs of modern households while ensuring a perfect balance between performance and energy efficiency. This model stands out with its array of features designed to simplify dishwashing tasks and deliver superior results.

One of the defining characteristics of the Indesit IDF 125 is its ample capacity. With a space for up to 13 place settings, this dishwasher is perfect for families or those who frequently entertain guests. The well-designed interior maximizes the available space, allowing users to load a variety of dishes, pots, and pans without hassle.

The IDF 125 is equipped with multiple wash programs, offering versatility to meet different cleaning needs. Whether it's light loads or heavily soiled dishes, users can select from options such as Eco, Rapid, and Intensive cycles. The Eco program is especially noteworthy, as it focuses on energy savings while still delivering excellent cleaning performance, making it an environmentally friendly choice.

In addition to its wash programs, the Indesit IDF 125 features a Delay Timer, allowing users to set the dishwasher to start at a more convenient time. This function is ideal for taking advantage of off-peak electricity rates, further enhancing energy efficiency. The appliance also offers a handy Half Load option, which enables users to run the dishwasher even when it is not full, saving both water and energy.

The dishwasher's design includes a high-quality stainless steel finish, giving it a modern and sleek appearance that fits well in any kitchen. The user-friendly control panel is intuitive, making it easy to navigate through the various settings and programs.

Another significant benefit of the Indesit IDF 125 is its excellent noise reduction capabilities. With a low noise level during operation, this dishwasher can be run at any time without disturbing the household.

Overall, the Indesit IDF 125 combines practicality, technology, and style, making it a smart choice for those seeking an efficient kitchen appliance that enhances their dishwashing experience. Its blend of features and energy-saving technologies not only improves functionality but also contributes to a sustainable lifestyle.
Top Page Image Contents