GB
Reversible doors
Warning: Before attempting to remove the door, switch off the electrical supply and pull out the mains plug.
It is recommended that you remove any loose items/fittings from inside the appliance and place food into insulated containers whilst carrying out this operation.
You may require assistance to carefully lay the appliance onto its back onto suitable protective materials (i.e. original packaging).
Remove the door
1.Lay down the appliance on its back.
2.Unscrew, remove and retain the bottom hinge pin.
3.Slightly open the door and slide downward, remove and carefully place to one side.
4.Unscrew the hinge pin from the top right hand side and refit the pin into the hole in left hand side.
5.Use a thin blunt instrument to remove the top and bottom hinge bushes and blanking plugs from the
door, take care not to mark the door handle. Reposition the blanking plugs and bushes on the opposite side.
3
4
1 | 2 |
5
Replacing the door
1.Carefully slide the door upward into the hinge pin.
2.Fit the bottom hinge pin making sure that the door is aligned to the cabinet.
3.Carefully stand the appliance upright in it’s required location and make sure it is sitting level on the floor. Open and close the door checking that the gasket makes a good seal without any gaps when the door is closed.
Note: Replace loose items/fittings back into the appliance and leave for at least 15 minutes before switching back on.
1
3
2
4