Indesit TZA 1 S Troubleshooting, Malfunctions Possible causes / Solutions

Page 9

Troubleshooting

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.

Malfunctions:

Possible causes / Solutions:

GB

The green POWER indicator light does not illuminate.

The indicator lights are on but the light is dim.

The WARNING Indicator light is Always On

The motor runs continuously.

The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house.

Pull out and reverse the plug before putting it back in the socket.

The door is closed properly and the seal is still OK?.

The door is being opened too often.

The TEMPERATURE CONTROL Knob is on the right setting.

The TEMPERATURE CONTROL Knob is on “Fast Freeze” setting (rapid freezing): the yellow FAST FREEZE light is (see Description).

The door is not closed properly or is continuously opened.

The outside ambient temperature is very high.

The thickness of the frost exceeds 2-3 mm (see Maintenance).

The appliance makes a lot of noise.

The appliance has not been installed on a level surface (see Installation).

The appliance has been installed between cabinets that vibrate and make noise.

The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal.

9

Image 9
Contents Freezer Operating InstructionsPositioning and connection InstallationPositioning LevellingFitting a new plug Reversible doors Remove the doorReplacing the door Description of the appliance Overall viewFreezing Using the freezer to its full potential Start-up and useStarting the appliance Switching the appliance off Maintenance and careCleaning the appliance Defrosting the applianceGeneral safety Precautions and tipsDisposal Respecting and conserving the environmentTroubleshooting Malfunctions Possible causes / SolutionsAppliance makes a lot of noise Assistance CommunicatingModel Page 195051960.01