Catalitic Cleaning*
GB
In some models, the most exposed internal vertical sides of the oven are coated with porous enamel, which is called catalytic enamel. When heated, this enamel destroys fat particles given off by the food. This "oxidation" of the fat particles occurs when the temperature of the sides exceeds 170°C. The porous quality of the catalytic enamel increases the surface area where the exchange vital to the oxidation of the fats takes place.
If there is still grime on the catalytic surfaces after the cooking programme has ended, leave the empty oven on with the door shut, turning the temperature adjustment knob to its maximum setting. Leave the oven like this for a period of time between 60 and 90 minutes, according to how much dirt was left inside. The cleaning process for more stubborn food residues may be quickened by using hot water and a soft brush.
Removing and fitting the oven door:
1.Open the door
2.Make the hinge clamps of the oven door rotate backwards completely (see photo)
3.Close the door until the clamps stop (the door will remain open for 40° approx.) (see photo)
40 ° |
4.Press the two buttons on the upper profile and extract the profile (see photo)
*Only available in certain models.
5.Remove the glass sheet and do the cleaning as indicated in chapter: "Care and maintenance".
6.Replace the glass.
WARNING! Oven must not be operated with inner door glass removed!
WARNING! When reassembling the inner door glass insert the glass panel correctly so that the
inscription written on the panel is not reversed and
can be easily legible.
7.Replace the profile, a click will indicate that the part is positioned correctly.
8.Open the door completely. 9.Close the supports (see photo).
10.Now the door can be completely closed and the oven can be started for normal use.
19