JBL SAM2LF, SAM1HF manual Floor Plan

Page 6

SPEAKER PLACEMENT

6.1-CHANNEL SYSTEMS

A 6.1-channel system can be thought of as a 5.1-channel system with the addition of a rear center speaker placed midway between the two surround speakers, and further to the rear than the surrounds. It should be placed at the same height as the side surround speakers (see Figure 5).

7.1-CHANNEL SYSTEMS

In a 7.1-channel system, two speakers are added for rear fill, in addition to the surround speakers in a 5.1-channel system. The two additional speakers are placed on the rear wall or near the rear wall in the ceiling (see Figure 6).

L C R

FLOOR PLAN

Figure 5. 6.1-Channel system

L C R

SIDE	SIDE
LEFT	RIGHT

REAR LEFT REAR RIGHT

Figure 6. 7.1-Channel system

6

Image 6

Contents SAM1HF SAM2LF Contents Introduction Speaker Placement IncludedChannel Systems Floor Plan SAM1HF and SAM2LF Configuration and Assembly For Vertical MountingDetailed Configurations and System Connection SAM1HF and SAM2LF Configuration and Assembly Connecting the Speakers to the Rest of Your System Connections to the Synthesis ElectronicsSDEC-4000P Outputs to Amplifiers S4000IC Number SDEC-4000 With Bi-Amplified Speakers Active Crossover Connecting the Speaker to the Rest of Your System INPUT/OUTPUT Assignments with Passive CrossoverConnection to the Rest of the JBL Synthesis System SDEC-3000 With Passive Crossover SAM12xTroubleshooting PhaseSpecifications SAM1HF SAM2LF