Steam - Heating liquids
•The steam/water pipe can be moved to the back of the cabinet when not in use. Pull forward when required.
CAUTION:
Do not touch when HOT!
•Press the steam control and the corresponding indicator blinks for 20 seconds.
The machine will be ready to make steam when the indicator stops blinking and remains lit.
•Place a jug with the liquid to be heated under the steam nozzle.
•Press and hold the start control within 10 seconds and wait for the steam function to commence.
CAUTION:
the desired function will be disabled if the start control is not pressed within 10 seconds. It will then be necessary to repeat the procedure.
•The steam will continue to spray till the start control is released.
MILK FOR CAPPUCCINO: Put some cold milk (100cc min.) in a deep jug and heat it using steam. Agitate the milk jug a little and wait until the foam is ready (one minute min.). To improve the result gently beat a little the jug on the table after that the foam is ready.
19