John Lewis JLBICM 01 instruction manual Stand-by mode

Page 18

Stand-by mode

•Push the machine back into the housing until a „click‰ can be heard. This indicates that the machine is locked in position.

Stand-by mode

•Once powered and inserted into the cabinet, the machine is in stand-by mode: this will be signaled by the on/off LED blinking.

•Press the start control to switch on the machine: the start LED will be illuminated.

•To come back to the stand-by mode, press the start control once again.

CAUTION:

On start-up, the machine initiates the pre-warming phase for the firs 3 minutes. During this phase the ON/OFF LED will blink quickly and the machine will be not able to execute any operation. Then the LED blinks slowly and the machine is ready to operate.

16

Image 18

Contents Instruction manual JLBICM 01 Coffee machinePage Service InstallationMaintenance and Cleaning Child SafetyDuring use For installation and servicing Safety instruction Hints and tips Enviromental informationGuide to use the instruction manual Contents For the InstallerFor the User 4. Steam/water nozzle 5. Drip tray 6. Coffee beans container Description of the Appliance1. Water reservoir 2. Brita filter 3. Coffee Outlet 7. Grinding regulation knob 8. Control panel 9. „Used‰ coffee drawerBuilding-in InstallationComponents for the installing the machine Electrical connectionFix the power cable onto the machine as shown in the figure Unscrew the cable clamp available on the machineInstalling the machine Page Permanent connection Technical specificationsElectrical connection WARNING THIS APPLIANCE MUSTBE EARTHED1. Water refill indicator 2. ON-OFF/stand-by indicator The control panelTouch controls 3. Start indicator 4. Hot water selector indicatorInstructions for the first use Filling up the water reservoirHardness of water Ensure the mains ON/OFF switchat rear is ON Filling up the container with coffee beans Initial start-up Adjusting the texture ground coffee Stand-by mode HOW TO OBTAIN AN EXCELLENT ESPRESSO Making coffeeHot water Do not touch when HOTSteam - Heating liquids Programming the amount of coffee beans to be grinded increasing or decreasing the grinding time can change the coffee taste Programming the volume of coffee dispensed in the cup If you wish to reset the standard values Resetting standard valuesVolumetric counter fault Signal and alarmsWater refill indicator „Used coffee drawer full‰/coffee beans refill indicatorCleaning Outer partsSteam nozzle Drip tray To empty the „used‰ coffee drawerCleaning cycle of the boiler Something not workingWater reservoir Repairs - after sales service 0870 010Spare parts Page John Lewis Partnership 171 Victoria Street London SW I E 5NN