Loading Bottom Rack
The bottom rack is designed for plates, pans, casseroles, and utensils. Items with
NOTE: The features on your dishwasher rack may vary from the drawings shown.
Do not cover spray tower. See arrow.
Mixed load
■Do not load glasses, cups, or plastic items in the bottom rack. Load small items in the bottom rack only if they are secured in place.
■Load plates, soup bowls, etc., between tines and facing inward to the spray.
■Overlap the edges of plates for large loads.
■Load soup, cereal, and serving bowls in the rack in a variety of ways depending upon their size and shape. Load bowls securely between the rows of tines. Do not nest bowls because the spray will not reach all surfaces.
Utensil load
■Load cookie sheets, cake pans, and other large items at the sides and back. Loading such items in front can keep the water spray from reaching the detergent dispenser and silverware basket.
■Secure heavily soiled cookware face down in the rack.
■Make sure pot handles and other items do not stop rotation of the spray arm(s). The spray arm(s) must move freely.
■Do not load items between the bottom rack and the side of the dishwasher tub because they might block the water inlet opening.
NOTE: If you have removed the bottom rack for unloading or cleaning, replace it with the bumpers in front.
Loading Silverware Basket
Load the silverware basket while it is in the bottom rack or take the basket out for loading on a counter or table.
NOTE: Unload or remove the basket before unloading the racks to avoid spilling water droplets on the silverware.
Style 1
(on some models)
Style 2
(on some models)
Mix items in each section of the basket with some pointing up and some down to avoid nesting. Spray cannot reach nested items.
IMPORTANT: Always load items (knives, skewers, etc.) pointing down.
NOTES:
■Do not load silver or
■Some foods (such as salt, vinegar, milk products, fruit juices, etc.) can pit or corrode silverware. Run a rinse cycle if you do not have a full load to wash immediately.
8