The control panel wine cooler
On /Off
Cooler ˚C
˚C
On /Off
Cooler/ ˚C Freezer
Quick
freeze Alarm off
˚CFreezer
Push button
A.Mains indicator light (green)
B.Wine cooler button On/Off
C.Temperature setting button (+) (for warmer temperatures)
D.Temperature display
E.Temperature setting button
When the wine cooler is first installed
Warning
Allow the appliance to stand for 2 hours after installation.
Insert the plug into the wall socket.
Press On/Off, button B can function the Wine cooler separately with the appliance in function.
The green mains indicator light illuminates.
Press either the “C“ (+) or “E“
Set the required temperature by pressing the “C“
(+)or “E“
Once the required temperature has been set, after a short period (approx. 5 sec.) the temperature display will change and again indicate the current ACTUAL temperature inside the Wine Cooler.
The display will change from flashing to continuous illumination.
Information! When the setting is changed, the compressor does not start immediately if automatic
defrosting is currently taking place. As the storage temperature within the Wine cooler is reached quickly you can store beverage immediately after switching on.
Important: If the wine cooler is switched off, the door must be closed to ensure that the freezer is working properly.
When switched off, the electronic control of the appliance functions automatically and periodically circulating the air to prevent unpleasant smells and humidity within the compartment.
Temperature setting buttons
The temperature is adjusted using the “C“ (+) and “E“
The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the display of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons,“C“ (+) or “E“
Each time one of the two buttons is pressed again the DESIRED temperature is adjusted by 1 °C. The DESIRED temperature will be reached within 24
12