John Lewis JLDWW 1201 instruction manual Starting a washing programme, To cancel a delay start

Page 15

Starting a washing programme

1.Check that the baskets have been loaded correctly and that the spray arms can rotate freely

2.Turn on the water tap

3.Close the dishwasher door

4.Press the On/Off button

The On/Off indicator light illuminates.

5. Setting and starting the programme

To select a programme, press the button of the programme you wish to select, the indicator light of the button illuminates and in the digital display will appear, flashing, the running time of the programme that has been set (in minutes).

The Programme time indicator light illuminates. After about 3 seconds from the last pressure of a button the programme starts automatically.

In the digital display the running time of the programme is no longer flashing, the Programme time indicator light remains illuminated.

Setting and starting the programme with the delay start

The setting of the delay start occurs before selecting the programme

Press the delay start button until the flashing number of the hours for the delay start will appear in the digital display (from 1h to 19h).

Select a washing programme. In the digital display will appear, for a moment, the running time of the programme and then again appears the selected delay start time.

As soon as the number of hours is displayed without flashing, the countdown for the delay start is active. The countdown will decrease with steps of 1 hour. The opening of the door during the countdown will not modify the delay start.

Once the delay start has elapsed the programme will start automatically.

Note: With the delay start set, the Programme time indicator light turns off. Once the countdown of the delay start has elapsed, the washing programme will start automatically and the Programme time indicator light will illuminate.

Note: it is possible to select a washing programme and the delay start also with the door slightly opened.

In this case the start of the programme or of the countdown for the delay start will start automatically after the closure of the door. Until this moment it is possible to change or modify the setting made.

6.To interrupt or cancel a washing programme in progress

Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary.

Attention! Hot steam may escape when the door is

opened. Open the door carefully.

To interrupt a washing programme in progress

a)Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted.

b)Press the On/Off button, in this case all the indicator lights turn off. Press the On/Off button again; the programme will start from the point at which it was interrupted.

To cancel a washing programme in progress

To cancel a washing programme you have to reset the dishwasher; press simultaneously the function buttons 2 and 3 for about 2 seconds, the indicator light of the running programme starts flashing for about 2 seconds. After about 2 seconds all the indicator lights will turn off (except for the On/Off indicator light and eventually the rinse aid and salt indicator lights) indicating that the running programme has been cancelled.

If a new washing programme will be selected, check that there is detergent in the detergent dispenser.

7. To cancel a "delay start"

To cancel a delay start you have to reset the dishwasher; follow the same instructions given in "To cancel a washing programme". Cancelling a delay start involves also the cancelling of the washing programme.

In this case you have to set the washing programme again.

8. End of the washing programme

The dishwasher will automatically stop.

The Programme time indicator light turns off.

In the digital display appears 0 (remaining programme time), only in this case the programme has ended.

If the door is not immediately opened at the end of the programme, air will circulate inside the dishwasher to prevent residual steam recondensing on the dishes as water droplets.

This device operates intermittently for about 20 minutes, as long as the dishwasher is switched on.

If the On/Off button is pressed or the door is opened during these 20 minutes, the device will be automatically cancelled.

Switch off the dishwasher by pressing the On/Off button. Open the dishwasher door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Jldww 1201 Dishwasher Your dishwasher in day-to-day use Important safety informationInstallation Child safetyContents Economical and ecological dishwashing DisposalDescription of the appliance Digital display indicates Control panelWater softener Prior to using for the first timeSetting manually Setting electronicallyTo fill Filling with dishwasher saltDeactivation/activation of the rinse aid dispenser Adjusting the doseRinse aid Filling with rinse aidAre of limited suitability Daily useLoading cutlery and dishes Lower basketCutlery basket Upper basketRemovable knife basket Adjusting the height of the upper basket Use of detergentTo move to the higher position proceed as follows Combi detergents Different kinds of detergentDetergent tablets Concentrated detergentAutomatic washing programme Washing programmesEnd of the washing programme To cancel a delay startSetting and starting the programme with the delay start Starting a washing programme1 function Unloading the dishwasherProlonged periods of non-operation Maintenance and cleaningCleaning the filters Frost precautionsFault Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault code / malfunction Possible cause SolutionsRepairs After Sales Service Wash results are not satisfactorySpare parts Levelling Installation instructionsTechnical specifications Fitting under a counterWater outlet hose connection Water supply connectionsElectrical connection Green and Yellow Earth Blue- Neutral Brown- LiveProceed as follows Cup racks position a Hints for test centres02/05

JLDWW 1201 specifications

The John Lewis JLDWW 1201 is a highly efficient and innovative dishwasher designed to meet the needs of modern households while ensuring ease of use and exceptional cleaning performance. This model stands out for its spacious design, advanced technologies, and user-friendly features that make dishwashing a hassle-free experience.

One of the key features of the JLDWW 1201 is its impressive capacity, allowing users to load up to 12 place settings in one go. This means that even after large family dinners or gatherings, there is ample space to accommodate all dishes, glasses, and utensils without the need for multiple wash cycles. The adjustable racking system adds flexibility, allowing users to customize the interior layout according to their needs.

The John Lewis JLDWW 1201 utilizes advanced energy-efficient technologies, boasting an impressive A+ energy rating. This ensures lower energy consumption while still delivering top-notch cleaning results. Furthermore, it includes Eco Wash programs that help reduce water usage, making it an environmentally friendly option for consumers looking to minimize their impact on the planet.

Another notable feature of this dishwasher is its quiet operation. With a noise level of just 49 decibels, users can enjoy a peaceful cooking or dining experience without the disruptive sounds usually associated with dishwashing machines. The machine also offers various wash programs, including intensive, quick wash, and gentle cycles, catering to different types of dishes and soil levels.

In terms of convenience, the JLDWW 1201 is designed with an intuitive control panel that makes it easy for anyone to operate. The LED display provides clear information on the selected program, remaining time, and progress, giving users real-time updates during the washing cycle. The delay start option adds further flexibility, enabling users to schedule washes at their convenience.

Safety features are also a priority with the John Lewis JLDWW 1201. It includes a child lock function, preventing little hands from interfering with the settings. The machine’s built-in overflow protection further ensures that leaks are detected and dealt with immediately, providing peace of mind to users.

In summary, the John Lewis JLDWW 1201 is a feature-rich dishwasher that excels in capacity, energy efficiency, quiet operation, and user convenience. Its advanced technologies and thoughtful design make it an excellent addition to any modern kitchen, ensuring that dishwashing is an easy and efficient task.
Top Page Image Contents