John Lewis JLDWW 1201 Prior to using for the first time, Water softener, Setting manually

Page 7

Prior to using for the first time

Before using your dishwasher for the first time:

1.Ensure that the electrical and water connections comply with the installation instructions

2.Remove all packaging from inside the appliance

3.Set the water softener

4.Pour 1 litre of water inside the salt container and then fill with dishwasher salt

5.Fill the rinse aid dispenser

The water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.

The higher the content of these minerals and salts, the harder your water is.

Water hardness is measured in equivalent scales, Clarke degrees, French degrees (°TH) and mmol/l (millimol per litre - international unit for the hardness of water).

The softener should be adjusted according to the hardness of the water in your area.Your local Water Authority can advise you on the hardness of the water in your area.

The water softener must be set in both ways: manually, using the water hardness dial and electronically, using the function push buttons on the control panel.

a) Setting manually

1.Open the dishwasher door.

2.Remove the lower basket from the dishwasher.

3. Turn the water hardness dial to position 1 or 2 (see table).

4.Replace the lower basket.

b) Setting electronically

(The dishwasher must be switched off)

The dishwasher is factory set at level 5.

1.Press the On/Off button.The On/Off indicator light illuminates (setting mode).

If other indicator lights are on, this means that a wash programme has been selected.The programme must be cancelled: press simultaneously the function buttons 2 and 3 for about 2 seconds. All the indicator lights will turn off (except for the On/Off indicator light and eventually salt and rinse aid indicator lights) indicating that the set programme has been cancelled and the machine is now in setting mode.

2.Press simultaneously function buttons 2 and 3, until the indicator lights of the function buttons 1, 2 and 3 start flashing.

3.Press the function button 1, the indicator lights of function buttons 2 and 3 turn off while the indicator light of the button

1 goes on flashing, the digital display indicates the current level.

Exampel: = level 5

4.To change the level, press button 1. Each time the button is pressed the level changes. (For the selection of the new level see the chart).

Examples:

if the current level is 5, by pressing button 1 once, level 6 is selected.

if the current level is 10, by pressing button 1 once, level 1 is selected.

5.To memorise the operation, switch off the dishwasher by pressing the On/Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.

The dishwasher is factory set at position 2.

AA07

 

Water hardness

 

Adjusting the

Level indicated

Use

Clarke

°TH

mmol/l

Range

water hardness setting

in the

of salt

 

electronically

digital display

 

degrees

manually

 

 

 

 

 

64 - 88

91 - 125

9,0 - 12,5

IV

2

level 10

 

yes

53 - 63

76 - 90

7,6 - 8,9

IV

2

level 9

 

yes

46 - 52

65 - 75

6,5 - 7,5

IV

2

level 8

 

yes

36 - 45

51 - 64

5,1 - 6,4

IV

2

level 7

 

yes

28 - 35

40 - 50

4,0 - 5,0

IV

2

level 6

 

yes

23 - 27

33 - 39

3,3 - 3,9

III

2

level 5

 

yes

18 - 22

26 - 32

2,6 - 3,2

III

1

level 4

 

yes

13 - 17

19 - 25

1,9 - 2,5

II

1

level 3

 

yes

5 - 12

7 - 18

0,7 - 1,8

I/II

1

level 2

 

yes

< 5

< 7

< 0,7

I

1

level 1

 

no

 

 

 

 

7

 

 

 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Jldww 1201 Dishwasher Your dishwasher in day-to-day use Important safety informationInstallation Child safetyContents Economical and ecological dishwashing DisposalDescription of the appliance Digital display indicates Control panelWater softener Prior to using for the first timeSetting manually Setting electronicallyTo fill Filling with dishwasher saltDeactivation/activation of the rinse aid dispenser Adjusting the doseRinse aid Filling with rinse aidAre of limited suitability Daily useLoading cutlery and dishes Lower basketUpper basket Cutlery basketRemovable knife basket Use of detergent Adjusting the height of the upper basketTo move to the higher position proceed as follows Combi detergents Different kinds of detergentDetergent tablets Concentrated detergentAutomatic washing programme Washing programmesEnd of the washing programme To cancel a delay startSetting and starting the programme with the delay start Starting a washing programme1 function Unloading the dishwasherProlonged periods of non-operation Maintenance and cleaningCleaning the filters Frost precautionsFault Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault code / malfunction Possible cause SolutionsWash results are not satisfactory Repairs After Sales ServiceSpare parts Levelling Installation instructionsTechnical specifications Fitting under a counterWater outlet hose connection Water supply connectionsGreen and Yellow Earth Blue- Neutral Brown- Live Electrical connectionProceed as follows Cup racks position a Hints for test centres02/05

JLDWW 1201 specifications

The John Lewis JLDWW 1201 is a highly efficient and innovative dishwasher designed to meet the needs of modern households while ensuring ease of use and exceptional cleaning performance. This model stands out for its spacious design, advanced technologies, and user-friendly features that make dishwashing a hassle-free experience.

One of the key features of the JLDWW 1201 is its impressive capacity, allowing users to load up to 12 place settings in one go. This means that even after large family dinners or gatherings, there is ample space to accommodate all dishes, glasses, and utensils without the need for multiple wash cycles. The adjustable racking system adds flexibility, allowing users to customize the interior layout according to their needs.

The John Lewis JLDWW 1201 utilizes advanced energy-efficient technologies, boasting an impressive A+ energy rating. This ensures lower energy consumption while still delivering top-notch cleaning results. Furthermore, it includes Eco Wash programs that help reduce water usage, making it an environmentally friendly option for consumers looking to minimize their impact on the planet.

Another notable feature of this dishwasher is its quiet operation. With a noise level of just 49 decibels, users can enjoy a peaceful cooking or dining experience without the disruptive sounds usually associated with dishwashing machines. The machine also offers various wash programs, including intensive, quick wash, and gentle cycles, catering to different types of dishes and soil levels.

In terms of convenience, the JLDWW 1201 is designed with an intuitive control panel that makes it easy for anyone to operate. The LED display provides clear information on the selected program, remaining time, and progress, giving users real-time updates during the washing cycle. The delay start option adds further flexibility, enabling users to schedule washes at their convenience.

Safety features are also a priority with the John Lewis JLDWW 1201. It includes a child lock function, preventing little hands from interfering with the settings. The machine’s built-in overflow protection further ensures that leaks are detected and dealt with immediately, providing peace of mind to users.

In summary, the John Lewis JLDWW 1201 is a feature-rich dishwasher that excels in capacity, energy efficiency, quiet operation, and user convenience. Its advanced technologies and thoughtful design make it an excellent addition to any modern kitchen, ensuring that dishwashing is an easy and efficient task.
Top Page Image Contents